.338 Norma Magnum

.338 Norma Magnum

Side by side comparison of the .338 Lapua Magnum cartridge to the .338 Norma Magnum cartridge.
Type Rifle
Place of origin Sweden
USA
Production history
Designer Jimmy Sloan, Norma
Manufacturer Norma
Produced 2009
Specifications
Parent case .416 Rigby
Case type Rimmed, bottleneck
Bullet diameter 8.60 mm (0.339 in)
Neck diameter 9.40 mm (0.370 in)
Shoulder diameter 14.50 mm (0.571 in)
Base diameter 14.87 mm (0.585 in)
Rim diameter 14.93 mm (0.588 in)
Rim thickness 1.52 mm (0.060 in)
Case length 63.30 mm (2.492 in)
Overall length 93.50 mm (3.681 in)
Case capacity 6.95 cm3 (107.3 gr H2O)
Rifling twist 235 mm (1 in 9.25 in)
Primer type Large rifle magnum
Maximum pressure 440.00 MPa (63,817 psi)

The .338 Norma Magnum is a cartridge first introduced in 2008 and coming into production in 2009, designed by Norma of Sweden.

Design history

The .338 Norma Magnum was originally developed as a long-range sport shooting wildcat cartridge by the American sport shooter Jimmie Sloan with the help of Dave Kiff, owner of Pacific Tool and Gauge, who made the reamers and headspace gauges. It was designed as a way to optimize shooting the 19.44 g (300 gr) 8.59 mm (.338 in) caliber Sierra HPBT MatchKing projectile from actions and magazines that lack the length to handle cartridges exceeding 91.44 mm (3.60 in) in overall length.[1] Later the design was purchased by the Swedish ammunition manufacturer Norma. The .338 Norma Magnum cartridge was C.I.P. certified on 26 May 2010 and thus became an officially registered and sanctioned rimmed rifle cartridge.[2]

Cartridge dimensions

The .338 Norma Magnum prior to C.I.P. certification had a shorter cartridge overall length (91.44 mm (3.60 in)) compared to the cartridge overall length of the .338 Lapua Magnum (93.50 mm (3.681 in)). The .338 Norma Magnum loaded with 19.44 g (300 gr) .338 caliber Sierra HPBT projectiles will have these projectile less deeply seated compared to the .338 Lapua Magnum when both cartridges are loaded to 91.44 mm (3.681 in) overall length. To achieve this the .338 Norma Magnum cartridge utilizes a shorter case (about 63.30 mm (2.492 in)) with less taper and a slightly sharper shoulder angle with a slightly longer neck, resulting in about 6.5% less case capacity. However the cartridge overall lengths of the .338 Norma Magnum and .338 Lapua Magnum are currently (2013) determined at 93.50 mm (3.681 in) by the C.I.P. rulings for these cartridges.

U.S. government market survey and ammunition availability

On June 17, 2008, the U.S. government issued a market survey to support a requirement for a Precision Sniper Rifle (PSR) to possibly replace the currently fielded Bolt Action SOF Sniper Systems MK 13 (.300 Winchester Magnum) and the M40 and M24 (7.62×51mm NATO) chambered to safely fire factory produced "non-wildcat" .338 caliber ammunition.[3][4][5] This means the .338 Lapua Magnum and .338 Norma Magnum or derivatives of these cartridges would be two likely candidates for the cartridge part of this market survey and winning future U.S. government contracts.[6]

The .338 Norma Magnum was designed to improve upon the .338 Lapua Magnum when loaded with 19.44 g (300 gr) Sierra very-low-drag bullets in magazines and actions that restrict the .338 Lapua Magnum's maximal cartridge overall length.

In long range precision sport shooting rifles, which the .338 Norma Magnum cartridges were designed for, the chamber and throat area of the barrel are often custom made by a gunsmith for a particular cartridge, meaning the rifle (system) is consciously constructed for optimal use with a particular cartridge case and projectile combination. If projectiles with differing dimensions are to be used this will generally erode such a custom made system's accuracy potential. This makes objective comparisons between cartridges hard, since cartridges are essential parts of a larger rifle system.

Since the .338 Lapua Magnum can be loaded to its C.I.P. overall length or even somewhat longer, the practical difference between the two cartridges gradually becomes negligible. Some manufacturers of .338 Lapua Magnum actions, magazines and rifles have indicated that they intend to offer products that will allow the use of .338 Lapua Magnum cartridges that can handle overall lengths that exceed the current C.I.P. .338 Lapua Magnum maximal overall length standard of 93.50 mm (3.681 in).

As of February 2009, the .338 Norma Magnum is still a very new cartridge with little commercial availability. However, it is available for purchase.[7]

Chambering availability

The .338 Norma Magnum chambering is offered for these factory rifles:

See also

References

  1. ↑ The 19.44 g (300 gr) .338 caliber Sierra HPBT MatchKing projectile was not available when the .338 Lapua Magnum was originally designed (it was optimized for shooting 16.2 g (250 gr) projectiles) and .338 Lapua Magnum cartridges intended for military use are generally loaded with shorter 16.2 g (250 gr) projectiles.
  2. ↑ C.I.P. TDCC datasheet 338 Norma Mag.
  3. ↑ US Special Operations Considers A ".338" Sniper Rifle Accessed 2009-03-22. Archived 2009-04-19.
  4. ↑ Precession Sniper Rifle - Solicitation Number: H92222-09-PSR Accessed 2009-03-22. Archived 2009-04-19.
  5. ↑ Commercially non-existent cartridges are termed "wildcats"
  6. ↑ U. S. American Precision Sniper Rifle Accessed 2009-03-22. Archived 2009-04-19.
  7. ↑ Jamison International website
  8. ↑ Remington Modular Sniper Rifle (MSR)

External links

This article is issued from Wikipedia - version of the Monday, March 28, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.