1366 Technologies

1366 Technologies is a company based in Bedford, Massachusetts that has developed a technique to produce silicon wafers by casting them in their ultimate shape directly in a mold, rather than the prevailing standard method in which wafers are cut from a large ingot. The company's management predicts that the new approach will be able to produce wafers at half the cost of current methods.[1] The company's name is a reference to the solar constant, representing the watts of solar energy that hits each square meter of the surface of the earth.

Market Aim

To manufacture multi-crystalline silicon wafers, the building blocks of solar cells, at half the cost. The company uses cast Silicon sheets, rather than cut Silicon ingots.

Technology

The company used a $4 million grant obtained from the United States Department of Energy's Advanced Research Projects Agency-Energy (ARPA-E) program in December 2009 to fund research over an 18-month period. Grants from ARPA-E are designed to provide money to relatively small projects offering the potential for high-payoff results in fostering advanced techniques. 1366 Technologies was able to announce eight months into the grant period that it had achieved success in its casting technology, in which molten silicon is poured directly into a mold to produce wafers in their final form, a square 6 inches (15 cm) on each side that is 200 micrometres thick and are then extracted from the mold using a proprietary technique to ensure that the wafer doesn't break while being removed from the mold.[1] In traditional methods, wafers of this size are cut from a large single ingot or crystal, in an approach that leaves as much as half of the original silicon ingot as waste.[2]

David Danielson, program director for solar energy at ARPA-E said that "early indications show this could be one of our great success stories." ARPA-E's first director Arun Majumdar estimated that current techniques generate solar power at a cost of $4 per watt, and that bringing down that cost to $1.50 per watt could lead to the widespread adoption of solar energy.[3] Company president Frank van Mierlo estimated that solar power generated using wafers from 1366 Technologies would be cheaper than power generated using coal.[1]

The company is now on their third generation of wafer-producing machines, which are full-sized, industrial line machines. The company will open a commercial-scale factory in upstate New York, slated for completion in 2017. This plant will start producing 50 million wafers annually, totaling 250 megawatts of output. It will eventually scale to 600 million wafers and 3,000 MW of annual production.[4]

Financing

1366 Technologies has raised $70 million[5] in capital to commercialize their innovation, from such investors as South Korean Hanwha Chemical, a major user of silicon wafers, as well as from Ventizz Capital Fund, North Bridge Venture Partners and Polaris Venture Partners.[1]

References

  1. 1 2 3 4 Wald, Matthew L. "A Cheaper Route to Solar Cells", The New York Times, October 19, 2010. Accessed October 19, 2010.
  2. ↑ Staff. "1366 Technologies to offer its texturing and fine-line metallization through RENA, plans production of lower cost silicon", i-micronews, October 15, 2010. Accessed October 19, 2010.
  3. ↑ Biello, David. "Sunshine is free, so can photovoltaics be cheap?", Scientific American, March 10, 2010. Accessed October 19, 2010.
  4. ↑ "1366 Technologies Aims To Slash Solar Wafer Costs 50% And Make Solar Cheaper Than Coal". Forbes. Retrieved 2015-12-01.
  5. ↑ Kelly-Detwiler, Peter. "1366 Technologies Aims to Slash Wafer Costs 50% and Make Solar Cheaper than Coal" November 23, 2015.

External links

This article is issued from Wikipedia - version of the Tuesday, March 08, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.