8"/35 caliber gun

8"/35 caliber Mark 3 & 4 / 8"/40 caliber Mark 5 Naval Gun

Crewmen standing atop USS Indiana forward port side 8-inch gun turret, circa the later 1890s.
Type Naval gun
Place of origin  United States
Service history
In service
  • Mark 3: 1889
  • Mark 5: 1894
Used by  United States Navy
Wars
Production history
Designer Bureau of Ordnance
Designed 1890
Manufacturer U.S. Naval Gun Factory
Variants Mark 3, Mark 4 and Mark 5
Specifications
Weight Mark 3 29,400 lb (13,300 kg)
Length
  • Marks 3 & 4: 299 in (7.6 m)
  • Mark 5: 343 in (8.7 m)
Barrel length
  • Marks 3 & 4: 280 in (7.1 m) bore (35 calibers)
  • Mark 5: 320 in (8.1 m) bore (40 calibers)

Shell 260 lb (120 kg) armor-piercing
Caliber 8 inches (203 mm)
Elevation
  • Marks 3 and 4:-5° to +20°
  • Marks 5 and 6:−4° to +13°
  • Marks 7, 8, and 9:−7° to +14°
Traverse
  • Bow and Stern Mountings:−150° to +150°
  • New York Amidships Mountings:140°
  • Brooklyn Amidships Mountings:140°
Rate of fire
  • 1890s: 0.5 to 0.8 rounds per minute
  • 1900s: 2 –2.8 rounds per minute
Muzzle velocity
  • 8"/35: 2,100 ft/s (640 m/s)
  • 8"/40: 2,000 ft/s (610 m/s)
Effective firing range 8"/35: 16,000-yard (14,630 m) at 20.1° elevation

The 8"/35 caliber gun (spoken "eight-inch-thirty-five--caliber") were used for the primary batteries of the United States Navy's first armored cruisers and the secondary batteries for their first battleships.[1] The 8"/40 caliber gun, all of which were the Mark 5, was used as main armament on the Columbia class protected cruisers and the Pennsylvania class armored cruisers.[1]

Mark 3

The Mark 3 Experimental was a 30 caliber gun that used trunnions and had 11 hoops with the outer hoop starting 4 in (100 mm) from the breech and running out to the muzzle. The production Mark 3 Mod 0 was a trunnioned 35 caliber gun that had 11 hoops with the outer hoop starting 4 in (100 mm) from the breech and running out to 43.5 in (110 cm) from the muzzle. This gun was removed from service prior to World War I. The Mark 3 Mod 1 was constructed of tube, jacket and eight hoops while Mod 2 was identical to Mod 1 but with different steps under the chase hoops. Mod 3 was for one gun lengthened to 40 calibers and was removed from service prior to the start of World War I. Mod 4 was for one gun with minor changes from Mod 3. Mod 5 had the trunnions removed and the outer jacket threaded to accept a sleeve.[1]

Mark 4

The original Mark 4 guns were identical to Mark 3 Mod 1 guns with the trunnion hoop and elevating band removed and with the threads formerly under the trunnion hoop being continued to the rear of the gun. This allowed these guns to be screwed into the sleeve of a two-gun turret mount. Mark 4 Mod 1 was one Mark 4 gun shortened by 0.66 in (1.7 cm) in rear of the threads. Mods 2 through 9 were for minor differences primarily for testing different mounting techniques. Mod 10 was for one gun cut down to 23 calibers and used for experimental work with high-explosive shells.[1]

Mark 5

Mark 5 was a new 40 caliber design intended for armored cruisers and battleship secondaries and constructed of tube, jacket, three hoops and one locking ring. This gun had a muzzle bell. Unfortunately, the Mark 5 proved to be unable to handle the transition from black powder to nitrocellulose propellants as the new propellant burned more slowly, which allowed pressure to build up to unsafe levels as the projectile traveled down the bore. This problem was illustrated when Colorado blew off the muzzle of one of her 8"/40 (20.3 cm) guns during gunnery practice off Chefoo, Shantung, on 22 June 1907. All Mark 5 guns were subsequently removed from service, lengthened to 45 calibers by adding a new liner and rehooped to the muzzle, redesignated as Mod 1 and then placed into reserve. Two of these Mod 1 guns were given a slightly different breech mechanism and gas seat and then designated as Mod 2. Pennsylvania-class were subsequently rearmed with the stronger 8 in (203 mm)/45 Mark 6 guns.[1]

Naval Service

Ship Gun Installed Gun Mount
USS New York (ACR-2) Mark 3 and Mark 4: 8"/35 caliber Mark 3 and Mark 4: 2 × Single center-pivots; Mark 5: 2 × Twin Turrets
USS Brooklyn (ACR-3) Mark 3 and Mark 4: 8"/35 caliber Mark 8: 4 × Twin Turrets
USS Pennsylvania (ACR-4) Mark 5: 8"/40 caliber 2 × Twin Turrets
USS West Virginia (ACR-5) Mark 5: 8"/40 caliber 2 × Twin Turrets
USS California (ACR-6) Mark 5: 8"/40 caliber 2 × Twin Turrets
USS Colorado (ACR-7) Mark 5: 8"/40 caliber 2 × Twin Turrets
USS Maryland (ACR-8) Mark 5: 8"/40 caliber 2 × Twin Turrets
USS South Dakota (ACR-9) Mark 5: 8"/40 caliber 2 × Twin Turrets
USS Charleston (C-2) Mark 3 and Mark 4: 8"/35 caliber Mark 3 and Mark 4: 2 × Single center-pivots
USS Baltimore  (C-3) Mark 4: 8"/35 caliber Mark 3 and Mark 4: 4 × Single center-pivots
USS Olympia (C-6) Mark 4: 8"/35 caliber Mark 6: 2 × Twin Turrets
USS Columbia (C-12) Mark 5: 8"/40 caliber Mark 3 or Mark 4: 1 × Single center-pivot
USS Minneapolis (C-13) Mark 5: 8"/40 caliber Mark 3 or Mark 4: 1 × Single center-pivot
USS Indiana (BB-1) Mark 3 and Mark 4: 8"/35 caliber Mark 7: 4 × Twin Turrets
USS Massachusetts (BB-2) Mark 3 and Mark 4: 8"/35 caliber Mark 7: 4 × Twin Turrets
USS Oregon (BB-3) Mark 3 and Mark 4: 8"/35 caliber Mark 7: 4 × Twin Turrets
USS Iowa (BB-4) Mark 3 and Mark 4: 8"/35 caliber Mark 7: 4 × Twin Turrets
USS Kearsarge (BB-5) Mark 3 and Mark 4: 8"/35 caliber Mark 9 (superimposed turret): 2 × Dual-Caliber Turret
USS Kentucky (BB-6) Mark 3 and Mark 4: 8"/35 caliber Mark 9 (superimposed turret): 2 × Dual-Caliber Turret

References

External links

Bluejackets Manual, 1917, 4th revision: US Navy 14-inch Mark 1 gun


Wikimedia Commons has media related to 8"/35 caliber gun.
This article is issued from Wikipedia - version of the Thursday, May 05, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.