Pro-Composites Vision

Vision
Role Amateur-built aircraft
National origin United States
Manufacturer American Affordable Aircraft
Pro-Composites
Designer Steve Rahm [1]
Introduction 1994
Status In production (2012)
Number built none
Unit cost
US$17,315 (plans and parts supplied, 2012)

The Pro-Composites Vision is an American amateur-built aircraft, designed by Steve Rahm and produced by Pro-Composites of Buffalo Grove, Illinois. The aircraft is supplied in the form of plans for amateur construction, with some pre-formed parts made available to speed construction.[1][2][3][4]

The design was originally marketed by American Affordable Aircraft of Daytona Beach.[5]

Design and development

The Vision features a cantilever low wing, a two-seats-in-side-by-side configuration cockpit under a bubble canopy, fixed conventional landing gear or optional tricycle gear with wheel pants and a single engine in tractor configuration.[2][4][5]

The Vision SP model is made from pre-formed flat fiberglass and foam composite panels which are then radius bent to shape. Its 21.75 ft (6.6 m) span wing employs a NACA 63A-415 airfoil at the wing root, transitioning to a NACA 63A-412 airfoil at the wing tip. The wing has an area of 85 sq ft (7.9 m2), with the cockpit up to 46 in (117 cm) in width. The tricycle landing gear version features a fully castering nosewheel and differential braking for steering. The aircraft can accept engines of 100 to 160 hp (75 to 119 kW) and the 100 hp (75 kW) Subaru Stratus, 108 to 116 hp (81 to 87 kW) Lycoming O-235 and 150 to 160 hp (112 to 119 kW) Lycoming O-320 have been used.[2][3][4][6]

The manufacturer markets the design as "the only all composite, plans built, 2 seat sport aircraft that uses a conventional - non canard - platform."[3][5]

Variants

Vision SP
Model with a short wing of 21.75 ft (6.6 m) span, an area of 85 sq ft (7.9 m2) and an aspect ratio of 5.5:1.[3][6]
Vision EX
Model with a longer wing of 25.5 ft (7.8 m) span, an area of 96 sq ft (8.9 m2) and an aspect ratio of 6.6:1, optimized for higher altitude flying, carrying heavier loads and operation by less experienced pilots.[3][6]

Specifications (Vision SP)

Data from Bayerl and Pro-Composites[2][6]

General characteristics

Performance

References

  1. 1 2 Levy, Howard (June 1998). "Realizing a Vision" (PDF). KitPlanes. Retrieved 14 October 2012.
  2. 1 2 3 4 Bayerl, Robby; Martin Berkemeier; et al: World Directory of Leisure Aviation 2011-12, page 116. WDLA UK, Lancaster UK, 2011. ISSN 1368-485X
  3. 1 2 3 4 5 Pro-Composites (n.d.). "Vision". Retrieved 14 October 2012.
  4. 1 2 3 VanderVeen, Scott A. (2012). "Mystery Plane". EAA Experimenter. Retrieved 14 October 2012.
  5. 1 2 3 Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, Fifth Edition, page 115. BAI Communications, 15 July 1998. ISBN 0-9636409-4-1
  6. 1 2 3 4 Pro-Composites (n.d.). "Specifications". Retrieved 14 October 2012.

External links

Wikimedia Commons has media related to Pro-Composites.
This article is issued from Wikipedia - version of the Saturday, July 18, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.