Hafner A.R.III Gyroplane

A.R.III Gyroplane
Hafner AR.III at Heston, 1935
Role Experimental autogyro
National origin United Kingdom
Manufacturer A.R.III Construction Company
Designer Raoul Hafner
First flight 6 February 1937
Number built 1


The Hafner A.R.III Gyroplane was a British 1930s experimental autogyro designed by Austrian Raoul Hafner, and built by the A.R.III Construction Company at Denham, Buckinghamshire.[1][2]

Design and development

The single-seat Gyroplane had a three-blade auto-rotating rotor fitted above the fuselage on a strutted plyon.[1] A 90 hp (67 kW) Pobjoy Niagara radial piston engine was mounted on the fuselage nose.[1] It had fixed tailwheel landing gear and the rear fuselage included a large dorsal fin to provide directional stability.[2] An unusual feature was the control system which was equipped with spider-actuated cyclic and collective pitch control of the rotor blades; this mechanism, a variant of the swashplate-actuated rotor control, became a standard feature on helicopters.[2] In 1935, the Gyroplane was manufactured at the Martin-Baker Aircraft Company's factory at Denham, Buckinghamshire.[1] In autumn 1935, the Gyroplane, registered G-ADMV, first flew at Heston Aerodrome, piloted by V.H. Baker.[3] On 6 February 1937, it flew at Hanworth Air Park, having been modified as the Mark 2 version. It was tested at Farnborough, and leased to the Royal Aircraft Establishment for research, but it was scrapped during the second world war.[1] A two-seat A.R.IV and three-seat A.R.V were planned, but construction was stopped when Hafner was interned under Defence Regulation 18B.

Variants

A.R.III
Prototype single-seat autogyro powered by a Pobjoy Niagara radial piston engine.
A.R.IV
Experimental rotorcraft to meet Air Ministry Specification S.22/38. Powered by a 210hp de Havilland Gipsy Six II engine, construction was started by Short Brothers as the Fleet Spotter, but was stopped in May 1940 when Hafner was interned.
A.R.V
Experimental rotorcraft to meet Air Ministry Specification S.22/38. Powered by a 210hp de Havilland Gipsy Six II engine, construction was started by Short Brothers as the Night Shadower, but was stopped in May 1940 when Hafner was interned.

Specifications

Data from [1]British Civil Aircraft since 1919 Volume

General characteristics

Performance

See also


Related lists

References

Notes

  1. 1 2 3 4 5 6 Jackson 1973, p. 319
  2. 1 2 3 Orbis 1985, p. 2057
  3. Flight, 19 September 1935, p. 318

Bibliography

Wikimedia Commons has media related to Hafner A.R.III Gyroplane.
This article is issued from Wikipedia - version of the Monday, February 22, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.