Acoustic hailing device

An example of an acoustic hailing device.

An acoustic hailing device (AHD) is a specialized loudspeaker that emits high-power sound waves for communicating at a distance. AHDs vary in design, output, and usability.

Overview

Acoustic hailing devices are acoustic devices capable of outputting highly intelligible sound at very high volumes. The distance at which acoustic hailing can be effective varies based on several factors including the sound level, directionality, and frequency of the acoustic source, the sensitivity and directionality of the receiver, and the transmission channel environment. The sound level diminishes or attenuates with distance. Consequently, as a general rule, higher source levels have greater range. Acoustic hailing devices can come in two forms;

  1. Directional models: These AHDs are characterized by their ability to create long-range, directional voice communications and warning tones. Their directionality is typically 5° to 60° radius conical at a 2 kHz tone.
  2. Omnidirectional models: These acoustic hailing devices are capable of creating 360° voice communications and warning tones. These devices are capable of being heard over 1.5 miles away from the emitter head.

History

An omni-directional AHD on a concrete pad in Afghanistan

Origin

The term acoustic hailing device came into common use following the suicide attack on the USS Cole while it was at port in Yemen in 2000. Following this attack, the United States Navy established a requirement for an acoustic hailing device. The intent of this AHD was to provide the Navy with a means to establish the intent of an approaching vessel at a distance such that defensive measures could be taken should the vessel not heed a warning. One unique aspect of this requirement was that the sound needed to be focused so that it could be clearly directed at the approaching vessel.

Present

Since their inception with the introduction of the Long Range Acoustic Device (LRAD) in 2002, acoustic hailing devices have grown into a variety of applications. AHD uses include checkpoints, crowd control, maritime shipping, mass notification, early warning systems, critical infrastructure protection, military applications and wildlife protection and control. Acoustic hailing devices are now fielded all over the world by various commercial, law enforcement, and military groups.

Characteristics and measurements

Acoustic hailing devices differentiate from conventional speaker systems in three key ways. Those include volume, clarity, and directionality. Various AHD manufacturers use different methods to measure their products, but a common standard has emerged for each.

Volume

Since sound attenuates at a set rate, extremely high outputs are required to cover the vast distances needed. Acoustic hailing devices have an output of 135 decibels (dB) or greater. The acoustic level of the source is commonly expressed in terms of Sound Pressure Level or SPL. SPL is a logarithmic measure of the rms sound pressure of a sound relative to a reference value. It is measured in decibels (dB) above a standard reference level. For reference, at a distance of 1 meter, a normal talking voice is approximately 50 dB and a jet engine at 30 meters is 150 dB.

Clarity

A principal weakness of common speaker systems and bullhorns are their clarity. Their horns and cones create sound that is distorted or out of phase. This results in the common “Charlie Brown” effect, where the message is muffled and misunderstood. AHDs create sound that is in phase. Because of this, sound emitted from acoustic hailing devices is intelligible at distance. Clarity is difficult to measure, since it is a subjective reference. However, different scales have been created to compare devices. A common measurement is the Speech Transmission Index (STI). STI ratings range from 0-1.0, with 1.0 being perfect clarity.[1]

Focus

AHDs are lastly characterized by directionality. To ensure messages are broadcast to the target, AHDs shape sound into a 30° - 60° audio beam. This shaping is accomplished through the design of the transducers as well as various reflective horns. The focus of an AHD is typically measured at the frequency of peak directionality. This is typically in the 1–2 kHz range. Not all frequencies of sound are able to be directed equally. Lower frequencies in the bass range are difficult to form. As such, their directionality may be a 40 degree radius or more depending on the design of the AHD.

A purpose-built riot shield that includes an acoustic hailing device

Non-lethal use

Acoustic hailing devices have the potential to be used as non-lethal devices. The human ear can typically stand a sound pressure level of 120db before feeling pain. AHDs are capable of 135 dB or more of acoustic energy. The OSHA states that any sound pressure level over 90 dB requires hearing protection.[2] As volume increases so does the chance of hearing loss. The effective non-lethal range of an AHD depends on the total acoustic output of the unit. Typically, this range is 50 meters or less.

See also

References

  1. ↑ http://www.meyersound.com/support/papers/speech/section4.htm
  2. ↑ https://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=standards&p_id=9735
This article is issued from Wikipedia - version of the Sunday, March 22, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.