Adventure R series

R series
Role Paramotor
National origin France
Manufacturer Adventure SA
Status Production completed
Unit cost
2,680 (2004)

The Adventure R series is a family of French paramotors that was designed and produced by Adventure SA of Méré, Yonne for powered paragliding. Now out of production, when they were available the aircraft were supplied complete and ready-to-fly.[1]

Design and development

The R (for Radne) series was designed as a very lightweight paramotor, to comply with the US FAR 103 Ultralight Vehicles rules as well as European microlight rules. It features a paraglider-style wing, single-place accommodation and a single 14.5 hp (11 kW) Radne Raket 120 engine in pusher configuration with a 3:1 ratio reduction drive, driving a 100 to 120 cm (39 to 47 in) diameter wooden, fixed pitch propeller. As is the case with all paramotors, take-off and landing is accomplished by foot.[1]

The aircraft is built from aluminium tubing, with a nylon seat and harness. Inflight steering is accomplished via handles that actuate the canopy brakes, creating roll and yaw.[1]

Variants

R2
Initial version, powered by a single 14.5 hp (11 kW) Radne Raket 120 engine[1]
R3
Follow-on version, also powered by a single 14.5 hp (11 kW) Radne Raket 120 engine[1]
R3E
Follow-on version, also powered by a single 14.5 hp (11 kW) Radne Raket 120 engine[1]

Specifications (R2)

Data from Bertrand[1]

General characteristics

References

  1. 1 2 3 4 5 6 7 Bertrand, Noel; Rene Coulon; et al: World Directory of Leisure Aviation 2003-04, page 62. Pagefast Ltd, Lancaster UK, 2003. ISSN 1368-485X
This article is issued from Wikipedia - version of the Wednesday, September 30, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.