Air Copter A3C

A3C
Role Autogyro
National origin France
Manufacturer Air Copter
Status In production (2011)
Unit cost
29,500 (2011)

The Air Copter A3C is a French autogyro, designed and produced by Air Copter of Lherm, Haute-Garonne. The aircraft is supplied as a kit for amateur construction.[1]

Design and development

The A3C was designed to comply with amateur-built aircraft rules. It features a single main rotor, a two-seat side-by-side configuration enclosed cockpit with a windshield, tricycle landing gear and a four-cylinder, air and liquid-cooled, four-stroke, dual-ignition, turbocharged 115 hp (86 kW) Rotax 914 or a normally-aspirated 100 hp (75 kW) Rotax 912S engine mounted in pusher configuration.[1]

Air Copter is well known as a designer and manufacturer of gyroplane rotor blades and other dynamic components and they also make their own components for the A3C. The aircraft's 8.40 m (27.6 ft) diameter rotor has a chord of 20 cm (7.9 in) and employs a NACA 8H12 airfoil. The main rotor has a pre-rotator to shorten take-off distance. The aircraft has an empty weight of 250 kg (550 lb) and a gross weight of 450 kg (990 lb), giving a useful load of 200 kg (440 lb).[1][2]

Specifications (A3C)

Data from Bayerl[1]

General characteristics

Performance


References

  1. 1 2 3 4 Bayerl, Robby; Martin Berkemeier; et al: World Directory of Leisure Aviation 2011-12, page 174. WDLA UK, Lancaster UK, 2011. ISSN 1368-485X
  2. Jane's Information Group (3 November 2011). "Air Copter - Air Copter Sarl (France), Aircraft - Manufacturer". Retrieved 26 December 2012.
This article is issued from Wikipedia - version of the Thursday, November 05, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.