Aluminium hydride

Aluminium hydride
Names
Preferred IUPAC name
Aluminium hydride
Systematic IUPAC name
Alumane
Other names
Alane

Aluminic hydride
Aluminium(III) hydride
Aluminium trihydride

Trihydridoaluminium
Identifiers
7784-21-6 YesY
ChEBI CHEBI:30136 YesY
ChemSpider 13833 YesY
17625618 (3H3)
245
Jmol 3D model Interactive image
PubChem 14488
14399066 (2H3)
16721258 (3H3)
Properties
AlH3
Molar mass 29.99 g/mol
Appearance white crystalline solid, non-volatile, highly polymerized, needle-like crystals
Density 1.477 g/cm3, solid
Melting point 150 °C (302 °F; 423 K) starts decomposing at 105 °C (221 °F)
reacts
Solubility soluble in ether
reacts in ethanol
Thermochemistry
40.2 J/mol K
30 K/mol K
-11.4 kJ/mol
46.4 kJ/mol
Related compounds
Related compounds
 Lithium aluminium hydride
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
YesY verify (what is YesYN ?)
Infobox references

Aluminium hydride (also known as alane) is an inorganic compound with the formula AlH3. It is a colourless pyrophoric solid. Although rarely encountered outside of research laboratories, alane and its derivatives are used as reducing agents in organic synthesis.[1]

Structure

Alane is a polymer. Its formula is sometimes represented with the formula (AlH3)n. Aluminium hydride forms numerous polymorphs, which are named α-alane, α’-alane, β-alane, δ-alane, ε-alane, θ-alane, and γ-alane. α-Alane has a cubic or rhombohedral morphology, whereas α’-alane forms needle like crystals and γ-alane forms a bundle of fused needles. Alane is soluble in THF and ether, and its precipitation rate from ether depends on the preparation method.[2]
The structure of α-alane has been determined and features aluminium atoms surrounded by 6 hydrogen atoms that bridge to 6 other aluminium atoms. The Al-H distances are all equivalent (172pm) and the Al-H-Al angle is 141°.[3]

α-AlH3 unit cell
Al coordination
H coordination

α-Alane is the most thermally stable polymorph. β-alane and γ-alane are produced together, and convert to α-alane upon heating. δ, ε, and θ-alane are produced in different crystallization condition. Although they are less thermally stable, they do not convert into α-alane upon heating.[2]

Molecular forms of alane

Monomeric AlH3 has been isolated at low temperature in a solid noble gas matrix and shown to be planar.[4] The dimer Al2H6 has been isolated in solid hydrogen and is isostructural with diborane,B2H6, and digallane, Ga2H6.[5][6]

Preparation

Aluminium hydride impurities and related amines and ether complexes have long been reported.[7] Its first synthesis published in 1947 and a U.S. patent for the synthesis was assigned to Petrie et al. in 1999.[8][9] Aluminium hydride is prepared by treating lithium aluminium hydride with aluminium trichloride.[10] The procedure is intricate, attention must be given to the removal of lithium chloride.

3 LiAlH4 + AlCl3 → 4 AlH3 + 3 LiCl

The ether solution of alane requires immediate use, because polymeric material precipitates otherwise. Aluminium hydride solutions are known to degrade after 3 days. Aluminium hydride is more reactive than LiAlH4, but their handling properties are similar.[2]

Several other methods exist for the preparation of aluminium hydride:

2 LiAlH4 + BeCl2 → 2 AlH3 + Li2BeH2Cl2
2 LiAlH4 + H2SO4 → 2 AlH3 + Li2SO4 + 2 H2
2 LiAlH4 + ZnCl2 → 2 AlH3 + 2 LiCl + ZnH2

Electrochemical synthesis

Several groups have shown that alane can be produced electrochemically.[11][12][13][14][15] Different electrochemical alane production methods have been patented.[16][17] Electrochemically generating alane avoids chloride impurities. Two possible mechanisms are discussed for the formation of alane in Clasen's electrochemical cell containing THF as the solvent, sodium aluminium hydride as the electrolyte, an aluminium anode, and an iron (Fe) wire submerged in mercury (Hg) as the cathode. The sodium forms an amalgam with the Hg cathode preventing side reactions and the hydrogen produced in the first reaction could be captured and reacted back with the sodium mercury amalgam to produce sodium hydride. Clasen's system results in no loss of starting material. For an insoluble anode see reaction 1.

1. AlH4− - e− → AlH3 · nTHF + ½H2 For soluble anodes, anodic dissolution is expected according to reaction 2,

2. 3AlH4− + Al - 3e− → 4AlH3 · nTHF In reaction 2, the aluminium anode is consumed, limiting the production of aluminium hydride for a given electrochemical cell.

The crystallization and recovery of aluminum hydride from electrochemically generated alane has been demonstrated.[14][15]

High pressure hydrogenation of aluminium metal

α-AlH3 can be produced by hydrogenation of aluminium metal at 10GPa and 600 °C (1,112 °F). The reaction between the liquified hydrogen produces α-AlH3 which could be recovered under ambient conditions.[18]

Reactions

Formation of adducts with Lewis bases

AlH3 readily forms adducts with strong Lewis bases. For example, both 1:1 and 1:2 complexes form with trimethylamine. The 1:1 complex is tetrahedral in the gas phase,[19] but in the solid phase it is dimeric with bridging hydrogen centres, (NMe3Al(μ-H))2.[20] The 1:2 complex adopts a trigonal bipyramidal structure.[19] Some adducts (e.g. dimethylethylamine alane, NMe2Et · AlH3) thermally decompose to give aluminium metal and may have use in MOCVD applications.[21]

Its complex with diethyl ether forms according to the following stoichiometry:

AlH3 + (C2H5)2O → H3Al · O(C2H5)2

The reaction with lithium hydride in ether produces lithium aluminium hydride:

AlH3 + LiH → LiAlH4

Reduction of functional groups

In organic chemistry, aluminium hydride is mainly used for the reduction of functional groups.[22] In many ways, the reactivity of aluminium hydride is similar to that of lithium aluminium hydride. Aluminium hydride will reduce aldehydes, ketones, carboxylic acids, anhydrides, acid chlorides, esters, and lactones to their corresponding alcohols. Amides, nitriles, and oximes are reduced to their corresponding amines.

In terms of functional group selectivity, alane differs from other hydride reagents. For example, in the following cyclohexanone reduction, lithium aluminium hydride gives a trans:cis ratio of 1.9 : 1, whereas aluminium hydride gives a trans:cis ratio of 7.3 : 1.[23]

Alane enables the hydroxymethylation of certain ketones, that is the replacement of C-H by C-CH2OH).[24] The ketone itself is not reduced as it is "protected" as its enolate.

Organohalides are reduced slowly or not at all by aluminium hydride. Therefore, reactive functional groups such as carboxylic acids can be reduced in the presence of halides.[25]

Nitro groups are not reduced by aluminium hydride. Likewise, aluminium hydride can accomplish the reduction of an ester in the presence of nitro groups.[26]

Aluminium hydride can be used in the reduction of acetals to half protected diols.[27]

Aluminium hydride can also be used in epoxide ring opening reaction as shown below.[28]

The allylic rearrangement reaction carried out using aluminium hydride is a SN2 reaction, and it is not sterically demanding.[29]

Aluminium hydride even reduces carbon dioxide to methane under heating:

4 AlH3 + 3 CO2 → 3 CH4 + 2 Al2O3

Hydroalumination

Aluminium hydride has been shown to add to propargylic alcohols.[30] Used together with titanium tetrachloride, aluminium hydride can add across double bonds.[31] Hydroboration is a similar reaction.

Fuel

Aluminium hydride have been discussed for storing hydrogen in hydrogen-fueled vehicles. AlH3 contains up to 10% hydrogen by weight, corresponding to 148g/L, twice the density of liquid H2. Unfortunately, AlH3 is not a reversible carrier of hydrogen.[32] It is a potential additive to rocket fuel and in explosive and pyrotechnic compositions.

Precautions

Aluminium hydride is not spontaneously flammable, but it is highly reactive, similar to lithium aluminium hydride. Aluminium hydride decomposes in air and water. Violent reactions occur with both.[2] With care AlH3 can be handled safely in air, thought to be a result of a protective layer of aluminium oxide.[32]

References

  1. ↑ Brown, H. C.; Krishnamurthy, S. (1979). "Forty Years of Hydride Reductions". Tetrahedron 35 (5): 567–607. doi:10.1016/0040-4020(79)87003-9.
  2. 1 2 3 4 US application 2007066839, Lund, G. K.; Hanks, J. M.; Johnston, H. E., "Method for the Production of α-Alane"
  3. ↑ Turley, J. W.; Rinn, H. W. (1969). "The Crystal Structure of Aluminum Hydride". Inorganic Chemistry 8 (1): 18–22. doi:10.1021/ic50071a005.
  4. ↑ Kurth, F. A.; Eberlein, R. A.; Schnöckel, H.-G.; Downs, A. J.; Pulham, C. R. (1993). "Molecular Aluminium Trihydride, AlH3: Generation in a Solid Noble Gas Matrix and Characterisation by its Infrared Spectrum and ab initio Calculations". Journal of the Chemical Society, Chemical Communications 1993 (16): 1302–1304. doi:10.1039/C39930001302.
  5. ↑ Andrews, L.; Wang, X. (2003). "The Infrared Spectrum of Al2H6 in Solid Hydrogen". Science 299 (5615): 2049–2052. Bibcode:2003Sci...299.2049A. doi:10.1126/science.1082456. PMID 12663923.
  6. ↑ Pulham, C. R.; Downs, A. J.; Goode, M. J.; Rankin D. W. H.; Robertson, H. E. (1991). "Gallane: Synthesis, Physical and Chemical Properties, and Structure of the Gaseous Molecule Ga2H6 as Determined by Electron Diffraction". Journal of the American Chemical Society 113 (14): 5149–5162. doi:10.1021/ja00014a003.
  7. ↑ Brower, F. M.; Matzek, N. E.; Reigler, P. F.; Rinn, H. W.; Roberts, C. B.; Schmidt, D. L.; Snover, J. A.; Terada, K. (1976). "Preparation and Properties of Aluminum Hydride". Journal of the American Chemical Society 98 (9): 2450–2454. doi:10.1021/ja00425a011.
  8. ↑ Finholt, A. E.; Bond, A. C. Jr.; Schlesinger, H. I. (1947). "Lithium Aluminum Hydride, Aluminum Hydride and Lithium Gallium Hydride, and Some of their Applications in Organic and Inorganic Chemistry". Journal of the American Chemical Society 69 (5): 1199–1203. doi:10.1021/ja01197a061.
  9. ↑ US patent 6228338, Petrie, M. A.; Bottaro, J. C.; Schmitt, R. J.; Penwell, P. E.; Bomberger, D. C., "Preparation of Aluminum Hydride Polymorphs, Particularly Stabilized α-AlH3", issued 2001-05-08
  10. ↑ Schmidt, D. L.; Roberts, C. B.; Reigler, P. F.; Lemanski, M. F. Jr.; Schram, E. P. (1973). "Aluminum Trihydride-Diethyl Etherate: (Etherated Alane)". Inorganic Syntheses. Inorganic Syntheses 14: 47–52. doi:10.1002/9780470132456.ch10. ISBN 9780470132456.
  11. ↑ Alpatova, N. M.; Dymova, T. N.; Kessler, Yu. M.; Osipov, O. R. (1968). "Physicochemical Properties and Structure of Complex Compounds of Aluminium Hydride". Russian Chemical Reviews 37 (2): 99–114. Bibcode:1968RuCRv..37...99A. doi:10.1070/RC1968v037n02ABEH001617.
  12. ↑ Semenenko, K. N.; Bulychev, B. M.; Shevlyagina, E. A. (1966). "Aluminium Hydride". Russian Chemical Reviews 35 (9): 649–658. Bibcode:1966RuCRv..35..649S. doi:10.1070/RC1966v035n09ABEH001513.
  13. ↑ Osipov, O. R.; Alpatova, N. M.; Kessler, Yu. M. (1966). Elektrokhimiya 2: 984.
  14. 1 2 Zidan, R.; Garcia-Diaz, B. L.; Fewox, C. S.;Stowe, A. C.;Gray, J. R.;Harter, A. G. (2009). "Aluminium hydride: a reversible material for hydrogen storage". ChemComm (25): 3717–3719. doi:10.1039/B901878F.
  15. 1 2 Martinez-Rodriguez, M. J.; Garcia-Diaz, B. L.; Teprovich, J. A.;Knight, D. A.;Zidan, R. (2012). "Advances in the electrochemical regeneration of aluminum hydride". Applied Physics A: Materials Science & Processing 106 (25): 545–550. Bibcode:2012ApPhA.106..545M. doi:10.1007/s00339-011-6647-y.
  16. ↑ DE patent 1141623, Clasen, H., "Verfahren zur Herstellung von Aluminiumhydrid bzw. aluminiumwasserstoffreicher komplexer Hydride", issued 1962-12-27, assigned to Metallgesellschaft
  17. ↑ US patent 8470156, Zidan, R., "Electrochemical process and production of novel complex hydrides", issued 2013-06-25, assigned to Savannah River Nuclear Solutions, LLC
  18. ↑ Saitoh, H; Sakurai, Y; Machida, A; Katayama, Y; Aoki, K (2010). "In situX-ray diffraction measurement of the hydrogenation and dehydrogenation of aluminum and characterization of the recovered AlH3". Journal of Physics: Conference Series 215: 012127. Bibcode:2010JPhCS.215a2127S. doi:10.1088/1742-6596/215/1/012127. ISSN 1742-6596.
  19. 1 2 Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. ISBN 0-08-037941-9.
  20. ↑ Atwood, J. L.; Bennett, F. R.; Elms, F. M.; Jones, C.; Raston, C. L.; Robinson, K. D. (1991). "Tertiary Amine Stabilized Dialane". Journal of the American Chemical Society 113 (21): 8183–8185. doi:10.1021/ja00021a063.
  21. ↑ Yun, J.-H.; Kim, B.-Y.; Rhee, S.-W. (1998). "Metal-Organic Chemical Vapor Deposition of Aluminum from Dimethylethylamine Alane". Thin Solid Films 312 (1–2): 259–263. Bibcode:1998TSF...312..259Y. doi:10.1016/S0040-6090(97)00333-7.
  22. ↑ Galatsis, P. (2001). "Diisobutylaluminum Hydride". Encyclopedia of Reagents for Organic Synthesis. Encyclopedia of Reagents for Organic Synthesis. doi:10.1002/047084289X.rd245. ISBN 978-0-470-84289-8.
  23. ↑ Ayres, D. C.; Sawdaye, R. (1967). "The Stereoselective Reduction of Ketones by Aluminium Hydride". Journal of the Chemical Society B 1967: 581–583. doi:10.1039/J29670000581.
  24. ↑ Corey, E. J.; Cane, D. E. (1971). "Controlled Hydroxymethylation of Ketones". Journal of Organic Chemistry 36 (20): 3070–3070. doi:10.1021/jo00819a047.
  25. ↑ Jorgenson, Margaret J. (July 1962). "Selective reductions with aluminum hydride". Tetrahedron Letters 3 (13): 559–562. doi:10.1016/S0040-4039(00)76929-2.
  26. ↑ Takano, S.; Akiyama, M.; Sato, S.; Ogasawara, K. (1983). "A Facile Cleavage of Benzylidene Acetals with Diisobutylaluminum Hydride" (pdf). Chemistry Letters 12 (10): 1593–1596. doi:10.1246/cl.1983.1593.
  27. ↑ Richter, W. J. (1981). "Asymmetric Synthesis at Prochiral Centers: Substituted 1,3-Dioxolanes". Journal of Organic Chemistry 46 (25): 5119–5124. doi:10.1021/jo00338a011.
  28. ↑ Maruoka, K.; Saito, S.; Ooi, T.; Yamamoto, H. (1991). "Selective Reduction of Methylenecycloalkane Oxides with 4-Substituted Diisobutylaluminum 2,6-Di-tert-butylphenoxides". Synlett 1991 (4): 255–256. doi:10.1055/s-1991-20698.
  29. ↑ Claesson, A.; Olsson, L.-I. (1979). "Allenes and Acetylenes. 22. Mechanistic Aspects of the Allene-Forming Reductions (SN2' Reaction) of Chiral Propargylic Derivatives with Hydride Reagents". Journal of the American Chemical Society 101 (24): 7302–7311. doi:10.1021/ja00518a028.
  30. ↑ Corey, E. J.; Katzenellenbogen, J. A.; Posner, G. H. (1967). "New Stereospecific Synthesis of Trisubstituted Olefins. Stereospecific Synthesis of Farnesol". Journal of the American Chemical Society 89 (16): 4245–4247. doi:10.1021/ja00992a065.
  31. ↑ Sato, F.; Sato, S.; Kodama, H.; Sato, M. (1977). "Reactions of Lithium Aluminum Hydride or Alane with Olefins Catalyzed by Titanium Tetrachloride or Zirconium Tetrachloride. A Convenient Route to Alkanes, 1-Haloalkanes and Terminal Alcohols from Alkenes". Journal of Organometallic Chemistry 142 (1): 71–79. doi:10.1016/S0022-328X(00)91817-5.
  32. 1 2 Graetz, J.; Reilly, J.; Sandrock, G.; Johnson, J.; Zhou, W. M.; Wegrzyn, J. (2006). "Aluminum Hydride, A1H3, As a Hydrogen Storage Compound". doi:10.2172/899889.

External links

This article is issued from Wikipedia - version of the Sunday, May 01, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.