Amplitude-Comparison Monopulse

Amplitude monopulse direction finding refers to a common technique employed in radar systems to improve the accuracy with which the direction of arrival of a pulse can be estimated.

Approach

Two overlapping antenna beams are formed, which are steered in slightly different directions, usually such that they overlap at the 3dB-point of the beams.[1] By comparing the relative amplitude of the pulse in the two beams, its position in the beams can be determined with an accuracy dependent on the signal-to-noise ratio (SNR). An accuracy of a tenth of beamwidth can be achieved with an SNR of 10dB.

In most implementations, two signals are formed, one being the sum of the two beams, and the other being the difference of the two beams. The ratio of these two beams normalises the difference signal and allows the direction of arrival of the signal to be calculated. The shape of the antenna beams must be known exactly and hence the accuracy of the techniques can be affected by unwanted multipath reflections.[2]

See also

References

  1. Amplitude Comparison Monopulse - Introduction of Radar Analysis
  2. Amplitude-Comparison Monopulse - Tracking Radar, Chap 18, p. 9
This article is issued from Wikipedia - version of the Thursday, September 05, 2013. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.