Antenna efficiency

Antennas
Part of a series on

Common types Dipole Fractal Loop Satellite dish Television Whip
Components Balun Block upconverter Coaxial cable Counterpoise (ground system) Feed Feed line Low-noise block downconverter Passive radiator Receiver Rotator Stub Transmitter Tuner Twin-lead
Systems Antenna farm Amateur radio Cellular network Hotspot Municipal wireless network Radio Radio masts and towers Wi-Fi Wireless
Safety and regulation Mobile phone radiation and health Wireless electronic devices and health International Telecommunication Union (Radio Regulations) World Radiocommunication Conference
Radiation sources / regions Boresight Focal cloud Ground plane Main lobe Near and far field Side lobe Vertical plane
Characteristics Array gain Directivity Efficiency Electrical length Equivalent radius Factor Friis transmission equation Gain Height Radiation pattern Radiation resistance Radio propagation Radio spectrum Signal-to-noise ratio Spurious emission
Techniques Beam steering Beam tilt Beamforming Bell Laboratories Layered Space-Time (BLAST) Multiple-input multiple-output (MIMO) Reconfiguration Spread spectrum Wideband Space Division Multiple Access (WSDMA)

Antenna efficiency, η, is a term associated with aperture antennas, e.g., parabolic dishes. Antenna efficiency is different from and contrasted with radiation efficiency, which applies to any antenna type.

Definition

Antenna efficiency is defined as the ratio of the aperture effective area, A_e to its actual physical area, A.^[1] It describes the percentage of the physical aperture area which actually captures radio frequency (RF) energy. Thus, the effective area of an aperture antenna is the surface area of a theoretically perfect aperture that would collect the same energy as the actual aperture with associated antenna efficiency.

$A_e=A\eta$

Effective area is an important concept in the study of antennas, because the ratio of the gain of an antenna to its effective area can be shown to be a universal constant.^[2]

Other definitions of efficiency in antennas

IEEE defines several other antenna parameters which include the word efficiency, such as

aperture illumination efficiency for aperture-antennas.
polarization efficiency; polarization mismatch factor.

These are closely related and easily misunderstood definitions. Care must be taken in engineering applications to ensure that the efficiency specifications are specific, clear, and unambiguous.

References

↑ IEEE Std 145-2013, Standard Definitions of Terms for Antennas
↑ Cheng, David K. (1992). Field and Wave Electromagnetics, 2nd Ed. Addison-Wesley. p. 635.

This article is issued from Wikipedia - version of the Monday, March 28, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.