stat (system call)

stat() is a Unix system call that returns file attributes about an inode. The semantics of stat() vary between operating systems. As an example, Unix command ls uses this system call to retrieve information on files that includes:

stat appeared in Version 1 Unix. It is among the few original Unix system calls to change, with Version 4's addition of group permissions and larger file size.[1]

stat() functions

The C POSIX library header sys/stat.h, found on POSIX and other Unix-like operating systems, declares the stat() functions, as well as related function called fstat() and lstat(). The functions take a struct stat buffer argument, which is used to return the file attributes. On success, the functions return zero, and on error, −1 is returned and errno is set appropriately.

The stat() and lstat() functions take a filename argument. If the file name is a symbolic link, stat() returns attributes of the eventual target of the link, while lstat() returns attributes of the link itself. The fstat() function takes a file descriptor argument instead, and returns attributes of the file that it identifies.

The family of functions was extended to implement large file support. Functions named stat64(), lstat64() and fstat64() return attributes in a struct stat64 structure, which represents file sizes with a 64-bit type, allowing the functions to work on files 2 GiB and larger. When the _FILE_OFFSET_BITS macro is defined to 64, these 64-bit functions are available under the original names.

The functions are defined as:

int stat(const char *filename, struct stat *buf);
int lstat(const char *filename, struct stat *buf);
int fstat(int filedesc, struct stat *buf);

stat structure

This structure is defined in sys/stat.h header file as follows, although implementations are free to define additional fields:[2]

struct stat {
	mode_t			st_mode;
	ino_t			st_ino;
	dev_t			st_dev;
	dev_t			st_rdev;
	nlink_t			st_nlink;
	uid_t			st_uid;
	gid_t			st_gid;
	off_t			st_size;
	struct timespec		st_atim;
	struct timespec		st_mtim;
	struct timespec 	st_ctim;
	blksize_t		st_blksize;
	blkcnt_t		st_blocks;
};

POSIX.1 does not require st_rdev, st_blocks and st_blksize members; these fields are defined as part of XSI option in the Single Unix Specification.

In older versions of POSIX.1 standard, the time-related fields were defined as st_atime, st_mtime and st_ctime, and were of type time_t. Since the 2008 version of the standard, these fields were renamed to st_atim, st_mtim and st_ctim, respectively, of type struct timespec, since this structure provides a higher resolution time unit. For the sake of compatibility, implementations can define the old names in terms of the tv_sec member of struct timespec. For example, st_atime can be defined as st_atim.tv_sec.[2]

The struct stat structure, also defined in sys/stat.h, includes at least the following members:

  • st_dev  identifier of device containing file
  • st_ino  inode number
  • st_mode  protection mode; see also Unix permissions
  • st_nlink  reference count of hard links
  • st_uid  user identifier of owner
  • st_gid  group identifier of owner
  • st_rdev  device identifier (if special file)
  • st_size  total file size, in bytes
  • st_atime  time of last access
  • st_mtime  time of last modification
  • st_ctime  time of last status change
  • st_blksize  preferred block size for file system I/O, which can depend upon both the system and the type of file system[3]
  • st_blocks  number of blocks allocated in multiples of DEV_BSIZE (usually 512 bytes).

The st_mode field is a bit field. It combines the file access modes and also indicates any special file type. There are many macros to work with the different mode flags and file types.

Criticism of atime

Reading a file changes its atime eventually requiring a disk write, which has been criticized as it is inconsistent with a read only file system. File system cache may significantly reduce this activity to one disk write per cache flush.

Linux kernel developer Ingo Molnár publicly criticized the concept and performance impact of atime in 2007,[4][5] and in 2009, the relatime mount option had become the default, which addresses this criticism.[6] The behavior behind the relatime mount option offers sufficient performance for most purposes and should not break any significant applications, as it has been extensively discussed.[7] Initially, relatime only updated atime if atime < mtime or atime < ctime; that was subsequently modified to update atimes that were 24 hours old or older, so that tmpwatch and Debian's popularity counter (popcon) would behave properly.[8]

Current versions of the Linux kernel support four mount options, which can be specified in fstab:

Current versions of Linux, Mac OS X, Solaris, FreeBSD, and NetBSD support a noatime mount option in /etc/fstab, which causes the atime field never to be updated. Turning off atime updating breaks POSIX compliance, and some applications, such as mbox-driven "new mail" notifications,[9] and some file usage watching utilities, notably tmpwatch.

The noatime option on OpenBSD behaves more like Linux relatime.

Version 4.0 of the Linux kernel mainline, which was released on April 12, 2015, introduced the new mount option lazytime. It allows POSIX-style atime updates to be performed in-memory and flushed to disk together with some non-time-related I/O operations on the same file; atime updates are also flushed to disk when some of the sync system calls is executed, or before the file's in-memory inode is evicted from the filesystem cache. Additionally, it is possible to configure for how long atime modifications can remain unflushed. That way, lazytime retains POSIX compatibility while offering performance improvements.[10][11]

ctime

ctime originally meant creation time,[12] however it has since been used almost always to refer to inode change time. It is updated any time file metadata stored in the inode changes, such as file permissions, file ownership, and creation and deletion of hard links. In some implementations, ctime is affected by renaming a file (both original Unix and modern Linux tend to do this).

Unlike atime and mtime, ctime cannot be set to an arbitrary value with utime(), as used by the touch utility, for example. Instead, when utime() is used, the ctime value is set to the current time.

Time granularity

Example

#include <stdio.h>
#include <stdlib.h>
#include <time.h>

#include <sys/types.h>
#include <pwd.h>
#include <grp.h>
#include <sys/stat.h>

int
main(int argc, char *argv[])
{

	struct stat sb;
	struct passwd *pwuser;
	struct group *grpnam;

	if (argc < 2)
	{
		fprintf(stderr, "Usage: %s: file ...\n", argv[0]);
		exit(EXIT_FAILURE);
	}

	for (int i = 1; i < argc; i++)
	{
		if (-1 == stat(argv[i], &sb))
		{
			perror("stat()");
			exit(EXIT_FAILURE);
		}

		if (NULL == (pwuser = getpwuid(sb.st_uid)))
		{
			perror("getpwuid()");
			exit(EXIT_FAILURE);
		}

		if (NULL == (grpnam = getgrgid(sb.st_gid)))
		{
			perror("getgrgid()");
			exit(EXIT_FAILURE);
		}

		printf("%s:\n", argv[i]);
		printf("\tinode: %u\n", sb.st_ino);
		printf("\towner: %u (%s)\n", sb.st_uid, pwuser->pw_name);
		printf("\tgroup: %u (%s)\n", sb.st_gid, grpnam->gr_name);
		printf("\tperms: %o\n", sb.st_mode & (S_IRWXU | S_IRWXG | S_IRWXO));
		printf("\tlinks: %d\n", sb.st_nlink);
		printf("\tsize: %ld\n", sb.st_size);
		printf("\tatime: %s", ctime(&sb.st_atim.tv_sec));
		printf("\tmtime: %s", ctime(&sb.st_mtim.tv_sec));
		printf("\tctime: %s", ctime(&sb.st_ctim.tv_sec));

		printf("\n");
	}

	return 0;
}

References

  1. McIlroy, M. D. (1987). A Research Unix reader: annotated excerpts from the Programmer's Manual, 1971–1986 (PDF) (Technical report). CSTR. Bell Labs. 139.
  2. 1 2 Stevens & Rago 2013, p. 94.
  3. "<sys/stat.h>". The Open Group Base Specifications Issue 6IEEE Std 1003.1, 2004 Edition. The Open Group. 2004.
  4. Kernel Trap: Linux: Replacing atime With relatime, by Jeremy, August 7, 2007
  5. Once upon atime, LWN, by Jonathan Corbet, August 8, 2007
  6. Linux kernel 2.6.30, Linux Kernel Newbies
  7. That massive filesystem thread, LWN, by Jonathan Corbet, March 31, 2009
  8. Relatime Recap, Valerie Aurora
  9. http://www.mail-archive.com/mutt-users@mutt.org/msg24912.html "the shell's $MAIL monitor ... depends on atime, pronouncing new email with atime($MAIL) < mtime($MAIL)"
  10. "Linux kernel 4.0, Section 1.5. 'lazytime' option for better update of file timestamps". kernelnewbies.org. May 1, 2015. Retrieved May 2, 2015.
  11. Jonathan Corbet (November 19, 2014). "Introducing lazytime". LWN.net. Retrieved May 2, 2015.
  12. https://www.bell-labs.com/usr/dmr/www/cacm.html
  13. "stat(2) - Linux manual page". man7.org. Retrieved February 27, 2015.
  14. Andreas Jaeger (December 2, 2002), struct stat.h with nanosecond resolution, mail archive of the libc-alpha@sources.redhat.com mailing list for the glibc project.
  15. MSDN: File Times

External links

This article is issued from Wikipedia - version of the Friday, March 04, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.