Autoloader

This article is about automated weapon loaders for vehicles. For other uses, see Autoloader (disambiguation).

In armored warfare, an autoloader or auto-loader is a mechanical aid or replacement for the personnel that load ordnance into crew-served weapons, such as tanks and artillery. The term is generally only applied to larger weapons that would otherwise have a dedicated person or persons loading them.

An autoloader, as its name suggests, extracts a shell and propellant charge from the ammunition storage rack/compartment and loads it into a magazine, if the gun has one, or directly into the chamber of the gun if it does not. It can and often does replace a human loader. By automating the loading process, it can streamline and speed up the loading process, resulting in a more effective fighting machine. In addition, by removing the need for one (or more) crew member, the overall size of the vehicle can be reduced, which in turn reduces the amount of surface area that needs to be armored, and thus a vehicle designed to use an autoloader can benefit from a significant decrease in weight and size. Also, since an autoloader can take up less volume inside a tank than a human, it potentially allows for a lower profile, making the tank harder to hit. Autoloaders are mechanical devices, and therefore their reliability depends on how well they are designed, manufactured, and maintained.

History

Autoloaders were developed at the beginning of World War II. Their first combat use was in "tank-buster" aircraft such as the 75 mm caliber Bordkanone BK 7,5 cannon-equipped Henschel Hs 129 B-3. Every Soviet- and Russian-derived tank since the T-64 main battle tank has used an autoloader. Their use has been mostly shunned by American and British tanks, although the American T22 medium tank was one of the first to use an autoloader.

Naval

In the modern era, autoloading is common on any large (3inch, or 76.2 mm caliber or greater) naval gun. The size of the shells, when combined with the more elaborate autoloading facilities available in the wider spaces of a ship, makes an autoloader much faster than human loaders. For example, the US 5"/38 Mark 12 can load about 20 rounds per minute.[1]

The Soviet/Russian AK-130 (twin barrel 130 mm), using autoloading, can achieve up to 40 rounds per barrel per minute.[2]

The Italian 127 mm/5" Compact has similar performance. The largest caliber auto-loading naval rifles were the US 8"/55 Mark 16, deployed on the three cruisers of the Des Moines class in the late 1940s, and the 8"/55 Mark 71 tested aboard the destroyer USS Hull in the late 1970s. Both weapons achieved a rate of fire of 12 rounds per barrel per minute, compared to 3-4 rounds per minute for the preceding hand-loaded weapons.

The advent of jet aircraft, and the rate of fire required to engage them, hastened the adoption of automatic loaders on naval artillery. Development of the loading systems was often problematic, and reliability was seriously compromised in many cases. The US 5"/54 Mark 42 was derated from 40 rounds per minute to 34 to improve reliability.[3] The Soviet/Russian AK-130 was so badly delayed that the missile cruiser Kirov (later Admiral Ushakov) was forced to use two older weapons in its place.[2] The US 3"/70 Mark 37[4] actually spent more time in design (13 years) than in service (12 years) due to severe unreliability. These problems are largely of the past and the field has advanced a great deal.

Ground vehicles

The American Mobile Gun System autoloader holds up to 18 rounds.

Rate of fire

A modern autoloader for a 120125 mm caliber weapon in good condition can achieve about 1012 rounds per minute. This rating may or may not include the time required to bring the gun to the appropriate loading angle (if required) and then bringing it back up to firing angle after loading. This is fast, but not quite as fast as a human loader, for which claims of 15 rounds per minute (at least for a short time) are made.

On the other hand, the very newest autoloaders claim to match this rate of fire.[5] Furthermore, it is considered atypical to engage more than a few targets per minute in a tank. The autoloader may also have an advantage while travelling over rough terrain that may jar a human loader enough to disrupt his loading cycle.

For weapons above 127 mm, the increased weight of the round pushes this issue decisively in favor of the autoloader. For self-propelled artillery with calibers of around 155mm, for example, autoloaders can typically achieve 812 rounds per minute, while a human loader(s) can typically achieve 4 rounds per minute. For sustained bombardments, this may not be so important. Sustained firing rates for artillery are typically only 12 rounds per minute, but the rapid-fire capability is vital to shoot-and-scoot tactics to deliver enough fire and then avoid the rapid counterbattery response provided by modern counterbattery systems. On the other hand, even during sustained bombardment an autoloader could be useful, as the fatigue issues of loading an artillery piece for hours do not affect them.

Survivability

The most common autoloaders store their ammunition in the turret basket, increasing the possibility of a catastrophic explosion should the armor around the hull or turret be penetrated. More armor protection, and isolation/separation of the ammunition from the crew compartment has traditionally been available in tanks with a human loader, which can decrease the possibility of cook-off, or protect the crew in case of an ammunition explosion.

For example the M1 Abrams was designed to protect the crew from cook-off, which is accomplished by storing the main gun ammunition in a compartment at the rear of the turret. The compartment is separated from the crew by a rapidly power operated armored door, which is only opened for a couple of seconds each time the loader needs to grab another round. The top of the compartment has special roof panels that are armored against outside attack but are much less resistant to pressure from inside, so that if the compartment is penetrated by enemy fire the panels will vent the explosion generated by the ammunition while protecting the crew. Other western designs from the later Cold War era to the present with manual loading have similar protective features. In contrast, the Soviet tanks of the Cold War which employ autoloaders store the ammunition on a carousel in the middle of the crew compartment, where any penetration by enemy fire is likely to incinerate the crew and blow the turret right off the top of the tank (known as the jack-in-the-box effect).[6]

However, some newer autoloader designs also store the ammunition in an isolated compartment in the turret bustle, with blow off panels on top and the ramming mechanism underneath or in the middle. This allows for much better crew protection, but is disadvantaged because the loading mechanism located in the ammunition compartment reduces the available space and number of rounds that can be carried considerably compared to a similar sized compartment without machinery. With such a design, the loader crew member can be eliminated, but only half the ammunition can be carried ready, in the compartment with the autoloader. Therefore, such a tank usually stores additional ammo in compartmentalized storage at the bottom of the fighting compartment, like older manual loading tank designs. This storage can be surrounded by water, and compartmentalized to some extent, but the reduced crew must still transfer this ammunition to the autoloader at some point. However, such a design can also allow for the rapid replacement of the autoloader and reloading of the ready ammunition by making the compartment at the rear of the turret a modular component that can be easily replaced with appropriate support equipment, similar to how the US MLRS system is reloaded, but possibly even faster. Another possible advantage is that the door that separates the turret can only be large enough for one round of ammunition to slide through, rather than extending across the entire rear of the turret as in the case of the M1 Abrams - this could save additional mass and reduce the power necessary to operate the door, by using less massive armor for the same level of protection, since it would be part of the turret instead of a sliding component in a heavy frame.

Size

Autoloaders are often implemented in an attempt to save on tank size. The T-64 is an example of this. The current generation of tanks using autoloaders (Russian T-90, Japanese Type 90 and Type 10, Chinese Type 98, Korea K2 Black Panther, French Leclerc, Pakistan Al-Khalid MBT) all weigh between 4555 tons. Tanks that do not use autoloaders tend to weigh in the 5570 ton range (American M1A2 Abrams, German Leopard 2, British Challenger 2).

Fatigue reduction

The replacement of the loader and gunner with a commander and driver could allow crewmembers to rotate shifts. This would enable continuous operations on the battlefield.[7]

A typical response of Soviet/Russian military theorists is that freed-up personnel can be directed to other assignments, e.g. manning SAM launch vehicles covering the tanks from air attack.

References

This article is issued from Wikipedia - version of the Wednesday, February 03, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.