Aveling and Porter

Steam traction engine "Lady Jane", manufactured by Aveling & Porter in 1928.
Aveling & Porter engine called 'Amy', recorded at Fawley Hill, 19 May 2013.

Aveling and Porter was a British agricultural engine and steam roller manufacturer. Thomas Aveling and Richard Thomas Porter entered into partnership in 1862, developed a steam engine three years later in 1865. The company became the largest manufacturer of steam rollers in the world.[1]

The partners

Thomas Aveling

Thomas Aveling was born 11 September 1824 at Elm, Cambridgeshire.[2] His mother was widowed while Thomas was still young and the family settled in Rochester, Kent. His mother remarried to the Rev. John D'Urban of Hoo St Werburgh. Thomas' stepfather brought him up with "a Bible in one hand and a birch rod in the other".[3] Thomas was apprenticed to Edward Lake, a farmer, of Hoo. Thomas married Edward's niece, Sarah Lake (daughter of Robert Lake of Milton-Chapel near Canterbury) and in 1850 took a farm at Ruckinge on Romney Marsh. In 1851 he was recorded as a farmer and grazier employing 16 men and 6 boys. The business also included a drainage tile works.

Aveling had a reputation as something of a martinet in business, only keeping on the best men.[4] However he did provide his staff with recreational facilities with a lecture room and mess room. Lectures were delivered on educational, social and political topics with Aveling himself in the chair and participation from the floor encouraged.[4]

Following the success of the Aveling and Porter business, Thomas rose to local prominence, first on the council and then between 1869 and 1870 as Mayor of Rochester.[2] Politically he held rather radical views within the Liberal Party.[4] Not surprisingly (given the location of the Invicta Works) he was a strong advocate of improving the river bank at Strood, which was at that time marsh.[4] As mayor he took an interest in the significant local charity Watts' Charity and was appointed to the board of trustees in 1871.[5] He helped lay out the public gardens in Rochester Castle, sat on the Rochester School Board and was a governor of the Sir Joseph Williamson's Mathematical School.[4]

He was a member of the Royal Agricultural Society of England, serving as councilman 1875–1882 and on various committees. He secured the building of a chemical laboratory for the society.[4] He was a member of the Institution of Civil Engineers, the Institution of Mechanical Engineers and the Iron and Steel Institute.[2]

Aveling enjoyed yachting and had his own 28 ton yacht Sally. He was active in the management of several yacht clubs including the Royal Cinque Ports and the Royal Victoria. After contracting a chill on board her in late February 1882 he developed pneumonia and died on 7 March 1882.[4]

Thomas Lake Aveling

T.L.Aveling was the son of Thomas Aveling and his wife, Sarah. He was born on 25 August 1856 in Ruckinge, Kent.[6] When he left school he worked for his father, taking control of Aveling & Porter in 1881. After conversion to a limited liability company in 1895 be became its chairman and managing director until he retired.[6] In 1890 he married Rosita Marion Porter (d. 1904) and had two sons.[6]

As a prominent local businessman Aveling served on a number of public bodies. He was chairman of the Medway Conservancy, on the board of the Rochester Bridge wardens, and a Justice of the Peace. Like his father he was a member of the ICE and IME and RASE. He was president both of the Smithfield Club and the Agricultural Engineers Association. He was on the board of the Maidstone manufacturers of steam wagons Jesse Ellis Ltd.[6]

Aveling retired from Aveling and Porter in 1928 and died of a heart attack on 5 June 1931 at home in Pettings Court, Ash near Wrotham, Kent.[6]

Major Thomas Aveling MC

Major Aveling was the son of T.L.Aveling and therefore the grandson of the founder. He was born on 20 January 1892 and during the First World War rose to the rank of Major. He was awarded the Military Cross in 1917.

Major Aveling became a director of A and GE, taking control of Aveling & Porter on his father's retirement in 1928.

Richard Thomas Porter

Richard Porter's grandfather John (1736-1812) established a grocery business in Sheffield, Yorkshire. His son Thomas married Ann Girdler and they had Richard in around 1835.[7] By 1861 Richard had moved to Enfield, London where he married Marianne Atkin (b. 1840) who had also been born in Sheffield.

In 1862 he went into partnership with Thomas Aveling and subsequently moved to Rochester where in around 1863 he had his first child, Edith. 1871 he is recorded as living at Boley Hill House with his wife, four children and four servants. His occupation is recorded in the census as "Manufacturing Engineer".[7]

Ten year later in 1881 the census locates him at Raleigh, Fox Grove Road, Beckenham with the family and servants as before plus his widowed sister-in-law Mary Studer. He remained in Beckenham, the house being recorded as 26, Foxgrove Road after 1901. He died in 1913. His will was proven the following year when he was shown as "Engineer and Chairman of Aveling and Porter".[7]

The business

Thomas Aveling, "Ironfounder and Agricultural Engineer"

Aveling & Porter no. 721 of 1871 - The earliest surviving A&P engine in the UK in The Science Museum

With help from his father-in-law he was able in either 1850 or 1851 to buy a small millwrighting business at Edward's Yard, Rochester.[3] The business produced and repaired agricultural machinery. Aveling had been concerned by the slow pace of agricultural labour arising from the "ancient and defective construction" of the machines.[3] Starting from 1852 he concentrated on experiments to in steam cultivation culminating in the first steam plough in 1856. So successful was the plough that some Kent farmers presented him with an award of 300 guineas in 1858.[3]

In 1858 Aveling had three premises: 24, High Street, Rochester; 27, Edwards Yard, Rochester; and a small foundry on the site of the future Invicta Works in Strood.[8]

To a man such as Aveling the spectacle of portable engines being dragged around by teams of horses when the engines had more than sufficient power to move themselves seemed nonsensical. He compared using six horses to pull such an engine as "six sailing vessels towing a steamer" which was "an insult to mechanical science".[3] In 1858 he adapted Clayton, Shuttleworth & Co portables by attaching a chain from the flywheel to a cog on a rear wheel. In the following year he obtained a patent for this which included the specification for devices for varying the tension in the chain and for disengaging it "so that a traction engine can be used as a stationary portable engine at will".[9] His foundry and other premises were too small for the construction of a complete traction engine, so the 1859 locomotive was built for him by Claytons.

His 1860 catalogue describes him as an "Iron Founder and Agricultural Engineer". He was the sole agent in Kent for Fowler's Steam Plough, for Burgess & Key's Patent Reaping Machines. He was an agent (though not apparently sole agent) for Claytons. The front page offers "Every description of Agricultural Machinery supplied at Manufacturer's Prices" and ends with "Castings to order", "Machinery and Steam Engines repaired". Inside was "Aveling's Patent Locomotive Steam Thrashing Train" with engine, threshing machine and straw carrier. Not withstanding his claims as an iron founder, this was made for him by Claytons.[10]

Having solved the propulsion issue, Aveling next turned to steering. His first engines had required a horse in shafts attached to the front wheels for steerage. In 1860 he replaced the horse with a steerable wheel in between the horse shafts.[11] The steersman sat on the back of the shafts and operated a tiller to turn the wheel.[12]

In 1860, the business moved to Strood, on a site adjacent to Rochester Bridge.[13] Preston reports the business as being established by 1861 at which time Aveling was able to build 7 1/2 ton engines.[14]

Aveling and Porter up to 1881

A river scene with wharf and above it a two storey red brick building. The building has decorative brickwork and plenty of windows. Along the facade are teo three storey decorated gable features.
Aveling & Porter building in Strood immediately prior to demolition in 2010

With all this expansion Aveling needed extra capital and so in 1862 he went into partnership with Richard Porter to create the firm of Aveling & Porter. As well as the capital, Aveling was freed of some of the commercial work.

The firm exhibited their Patent Agricultural Locomotive Engine for Threshing, Ploughing and General Traction Purposes at Battersea in 1862. Aveling moved the cylinder forward from over the firebox to the front of the boiler. The steam jacket that surrounds the cylinders did away with the need for a separate dome (the patent stated that the cylinders were placed within the dome).[15] The jacket reduced condensation, and hence priming, in the cylinders, valve gear and now non-existent supply piping. Ports between the jacket and boiler communicated live steam. The crankshaft was now close to the wheels and the long chain could be first shortened, then disposed of in favour of gears. In 1863 Aveling patented two speed gearing.[16] Exports at this period were to Prussia and Australia.

Testing traction engines was a public affair, one was tested by driving it through Rochester to the station and back, another by driving it up Frindsbury hill. The local public turned out to see such trials and according to the Chatham News of August 1862 they were "well pleased and altogether favourably impressed".[17] Whilst the local public might have been impressed, more generally opposition to road locomotives was building. In 1865 the Locomotive Act (the "red flag" act) was introduced which reduced speeds from the previous limit of 10 miles per hour (16 km/h) to 2 miles per hour (3.2 km/h) in town and 4 miles per hour (6.4 km/h) outside. To enforce the speeds a man had to walk in front carrying a red flag to warn bystanders.

Aveling pursued his interest in steamrollers, producing the first practical example in 1865. It was tested in Military Road, Chatham, Star Hill in Rochester and in Hyde Park, London. The machine proved a huge success. Aveling and Porter steam rollers were exported to Europe and as far afield as India and North America.

Starting in 1868 Aveling & Porter started to supply the government with road locomotives, traction engines and rollers. Up until 1894 they were known as "Steam Sappers" since they were built to requirements issues by the Royal Engineers (the "Sappers"). More details are given below under Products. In 1875 the French government conducted trials of steam sappers and were satisfied enough to order some;[18] subsequently the Russian government conducted extensive trials in 1876 involving soft ground, steep inclines and tests of the ability of a train to be safely brought down hill. The test engine was fitted with a wire cable by which guns could be pulled up hill. Several engines were subsequently purchased and gave satisfactory service in the Russo-Turkish war.[18] Sappers were also sold to Italy.[18]

Technical innovation continued. Unlike railway locomotives where equipment is mounted on a frame, traction engines use the boiler as the frame. This cuts down on weight but introduces stresses and holes for the rivets which could be a source of leaks or failures. In 1870 Aveling introduced horn plates which were extensions of the outer firebox and which carried all the motion, cranks and gearing.[19] Preston regards this as one of Aveling's most important inventions.[20] Also in 1870 he took out a patent on a simplified reversing gear.[21] Eight years later he managed to move the gears between the bearings, not overhanging. The resultant motion was stronger and narrower allowing a more compact engine.[20]

At the Royal Agricultural Society of England (RASE) meeting at Leicester in 1868 Aveling showed "Little Tom", a small engine fitted with a crane. By 1874 the catalogue listed a 2-ton crane engine with a rear differential to permit tight cornering without disconnecting either wheel.[22]

Aveling and Porter after 1881

In 1881 Thomas' son, Thomas Lake Aveling, took over control of the business. Writing in 1899 Henry Smetham commented that the business had "doubled in size about every six years".[23] Employee headcount rose from 400 in 1872 to 1,000 in the mid-1890s and peaked at 1,500.[6] A new office block was built in 1886 which subsequently housed the drawing office.[24] The adjacent foundry business of Messrs Collis and Stace was purchased in 1895 along with the Pelican Yard.[24] Avelings were now making cement manufacturing machinery (including concrete mixers), lamp posts and girders, the latter of which can be seen in the roof of the covered slip at Chatham Historic Dockyard.[24] In the same year the company was incorporated as a limited company. In 1899 Avelings turned out "one large road engine per day", paid £70,000 pa in wages locally using "220 lathes and other tools".[23] In common with most engineering works Avelings made a lot of their own machine tools themselves.[25] However, in 1900 the "Public Health Engineer" magazine stated that "modern American machinery is rapidly replacing the older forms of lathes and shaping and planing machines".[26]

In 1901 Aveling took part in a joint venture with Vickers Sons and Maxim to build a steel casting facility. Details were finalised and the plant constructed the following year. By 1903 Vickers were reporting poor results due to insufficient orders (in particular field guns) and in March 1904 pulled out, the works subsequently closing in October 1904. A 21-year lease to William Towler (trading as the Medway Steel Company) followed but then the works finally closed.[27]

In the years prior to World War I the Pelican Yard was built up and used for the assembly and testing of petrol engines for rollers and lorries. On the outbreak of war petrol work stopped and the works were used as a store.[28] Although concentrating on steam rollers (for which there was an expanding market), the company also made traction engines, ploughing engines, steam wagons and tramway locomotives. Other agricultural products were contracted out.[6] In the early twentieth century Aveling & Porter were supplying about 70% of the British market for road rollers.[6]

Agricultural & General Engineers

In 1919 Aveling and Porter joined the Agricultural & General Engineers (AGE) combine. The combine had been formed at the joint instigation of T.L.Aveling and Archibald Maconochie. As well as Aveling & Porter, AGE took over James and Frederick Howard Ltd and twelve other companies.[6] Production of Aveling and Porter steam wagons was transferred to Richard Garrett & Sons.

The holding company's overheads exceeded any savings of scale. The combine started to drag down A&P, and by 1928 headcount was down and short-time working had been implemented.[6] In 1932 AGE went into receivership, bringing down Aveling and Porter with it.[29] In the aftermath Aveling and Porter combined with Barford & Perkins in 1933 to form Aveling-Barford which continued to make steam and motor rollers. The rescue, part-funded by Ruston & Hornsby of Lincoln, involved the firm moving to Grantham, Lincolnshire, from the Rochester site. After World War II the company continued to make motor and steam rollers as well as expanding into other construction equipment.

The sole remaining building on the Strood site was demolished by Medway Council in 2010.

Aveling-Barford is now part of the Wordsworth Holdings Group, a family-owned company. The company is based in Grantham, and still trades under the name 'Barford' which uses a modern version of the Aveling-Barford 'prancing horse' logo. Barford manufacturers and sells a wide range of site dumpers.[30]

Products

Aveling & Porter built more steam rollers than all the other manufacturers combined. They also built traction engines and steam wagons.

The company also built a few pairs of ploughing engines. A pair of which (unique in the UK) survive in the collection at the Thursford Steam Museum at Thursford, Norfolk.[31] The Thursford Collection includes 27 Aveling & Porter steam tractors and rollers and 16 more by other manufacturers.[32]

Another example of Aveling and Porters engineering skills can be seen in the massive covered slips at Chatham Dockyard. These Leviathans pre-date the great London train sheds of St. Pancras, King's Cross and Paddington—traditionally understood to be the oldest and largest metal framed structures of the time.[33]

Locomotives

Aveling & Porter built several small shunting / tram locos based on their traction engines. They were basically traction engines with flanged wheels and no steering. Their advantages were that they were cheap to manufacture (and to design in the first place) and they could be operated with minimal training by someone who was familiar with traction engines.

Works Number Places worked/been/owner Name Arrangement Tractive Effort(lb) Weight Status Date Built Location Reference
Nether Heyford 0-4-0WT
Johnsons Cements Works,Greenhithe 0-4-0WT
121 Grays Quarries Co Ltd [34]
129 Chatham Dockyard, Kent/Devonport Dockyard, Devon/Portsmouth Dockyard, Hants
Lodge Hill & Upnor Railway 		2-2-0T 1865 [35][36]
151 Grays Quarries Co Ltd [35]
167 Grays Quarries Co Ltd [35]
182 Chatham Dockyard, Kent/Devonport Dockyard, Devon/Portsmouth Dockyard, Hants
Lodge Hill & Upnor Railway 		2-2-0T 1866 [35][36]
218 Chatham Dockyard, Kent/Devonport Dockyard, Devon/Portsmouth Dockyard, Hants
Lodge Hill & Upnor Railway 		2-2-0T 1866 [35][36]
221 Brassey, Wythes & Lucas - East London Railway Contract 0-4-0WT (6 hp) 17/9/1866 [37]
235 Brassey, Wythes & Lucas - East London Railway Contract 0-4-0WT (10 hp) 23/10/1866 [37]
524 William Jay - Hyde Park Contract 0-4-0WT (6 hp) 13/1/1870 [37]
718 Chatham Dockyard
Lodge Hill & Upnor Railway 		2-2-0T 1871 [36]
719 Chatham Dockyard
Lodge Hill & Upnor Railway 		2-2-0T 1871 [36]
807 Wotton Tramway/Brill Tramway (No 1)
Nether Heyford Brickworks (Northamptonshire)/War Department
Neasden Depot
Museum of British Transport, Clapham
London Transport Museum 		0-4-0T (6 hp) 9.4 tons Static Display 24/1/1872 Buckinghamshire Railway Centre - On loan from London Transport Museum [38]
830 Lodge Hill & Upnor Railway Steam Sapper No.5 2-2-0T 1872 [36]
846 Wotton Tramway/Brill Tramway (No 2)
Nether Heyford Brickworks (Northamptonshire)/War Department 		0-4-0T (6 hp) 9.4 tons Used as spares for 807 1872 [38]
1023 Chatham Dockyard
Lodge Hill & Upnor Railway 		2-2-0T 1874 [36]
3567 Beadle Bros, Erith
Erith Oil Works
Enfield Veteran and Vintage Vehicle Society
Luton
Buckinghamshire Railway Centre 		Sydenham 0-4-0WT 9,033 Operational 1895 Chatham Dockyard - On loan from Buckinghamshire Railway Centre, Quainton [39]
3592 Tom Price,Newman in northern Wairarapa
Tom Price,Petone
Puketapu Sawmilling Co, Matapuna
NZ Powell Wood Process Co., Rangataua
Ellis & Burnand Ltd., Ongarue
Marton Sash & Door Ltd 		The Squirt 0-4-0WT Probably scrapped 1896 [40]
3766 Glenlossie-Glenlivet Distillery, Elgin 0-4-0WT replaced 1924 1896 [41]
4006 Balmenach Distillery, Cromdale 0-4-0WT replaced 1936 [41]
4141 G Geddes, Mosstowie Quarry, Elgin 0-4-0WT [41]
4371/99 Amberley Chalk Pit 0-4-0WT Scrapped 1958 [42]
4399 Aveling-Barford Ltd., Grantham 0-4-0WT 1899 [35]
4445 South Suburban Gas Co, Lower Sydenham Gas Works Bull Dog 0-4-0WT 1899 [43]
4537 APCM - Stone Works 0-4-0WT 1900 [44]
4780 Croydon Gas & Coke Co - Wadden Marsh Gas Works
South Eastern Gas Board 		0-4-0WT [45]
5935 LBC’s Newton Longville Works
Elstow
LBC’s Calvert Works 		0-4-0WT 1905 [46]
6158 Mountfield in Sussex
Richard Garrett & Sons, Leiston
Sir William McAlpine 		Sirapite 0-4-0WT 18 tons 10cwt Operational 1906 Longshop Museum, Leiston [47]
8800 Vickers Armstrong Ltd,Erith
British Oil and Cake Mills,Erith
Hollycombe
Buckinghamshire Railway Centre, Quainton 		Sir Vincent 0-4-0WT (18 hp) Operational 1917 Private railway [48]
9449 Holborough Cement Co. Ltd., Kent
Bluebell Railway
Northants Ironstone Trust
Buckinghamshire Railway Centre
Chinnor and Princess Risborough Railway
Battlefield Line, Shackerstone 		Blue Circle 2-2-0WT Operational 1926 Rushden, Higham and Wellingborough Railway [49]

Steam Sappers

Prior to 1868 the Royal Engineers had been experimenting with steam traction. Early examples had used modified railway locomotives mounted on a variety of wheels to traverse soft land. The locomotives were far too heavy to be effective, on one occasion breaking through the road near the Royal Arsenal at Woolwich into cellars below.[50] With the development of the relatively lightweight traction engine specifically for road use, the Royal Engineers turned their attention to them.

The first Steam Sapper was ordered from Aveling & Porter in 1868.[51][52] Steam sapper number 1 was required to operate a 36 inches (910 mm) circular saw, grindstone, lathe and joiner as well as drawing 5 tons up a 1 in 12 slope. It performed this, but was more than a quarter of a ton over the specified maximum weight of five tons. The heaviest field gun in use at that time was the 64 pdr Armstrong breech loading siege gun weighing 95 long cwt (10,600 lb; 4,800 kg). Since pontoon bridges would be constructed to support this gun, steam sappers were required to weigh less than the gun so that they would not overload the bridges.[53] Steam sapper number one had a loading on the rear wheels less than this, and so was accepted.[52]

During 1869 military exercises in Dover included drawing a battery of guns from the railway station up to the castle, a high, steep hill. As a result of this steam sapper number 2 was purchased in 1871. This was a lighter and more powerful engine than number one. The engine was rated 7 nhp (compared to 6), used spur gears for the drive (compared to chain) and used a differential drive on the rear axle to avoid the need to disconnect one wheel which the earlier locomotive had required. On test it drew 15.5 long tons (15,700 kg) up the 1 in 11 gradient of Star Hill, Rochester.[54]

In late 1871 the Inspector General of Fortifications was informed by the RE Committee that only Aveling and Porter had a suitable engine. As a result, five more were ordered in 1872.

Some of the steam sappers were fitted with railway wheels. Yeatman records steam sappers numbers 3-7 as being 2-2-0T locomotives on the Lodge Hill and Upnor Railway.[36] Yeatman's editor, Mullett and Nowers disagree.[55] Aveling-Barford have checked their records and have no records of any steam sappers being supplied other than for road use. Nowers states that sapper number 9 was fitted with railway wheels for a trial and that sapper number 12 was purchased with them.[56] In the table below possible railway use is recorded, in all cases this would be upon the LH&UR.

Sapper number 8 was dismantled and sent in parts to Cape Coast Castle in the Gold Coast to take part in the Ashanti Campaign of 1873. The absence of decent roads made its use as a traction engine unsatisfactory. However it performed well as a stationary engine, particularly working the saw bench.[57]

Sapper number 24 was the last Aveling and Porter engine to be called a steam sapper. It was used by the newly formed Balloon Corps in 1885. The locomotive and another one ordered shortly afterwards were used to haul "balloon trains". Each train consisted of five wagons carrying gas cylinders, a water cart, and a wagon for the balloon, basket and winch. Balloons were normally employed as elevated observation platforms and as such were tethered though observers were trained in how to handle free flight in case the balloon broke away.[58]

Aveling and Porter engines continued to be purchased up to 1899 though losing ground to Fowlers. At least one engine saw service in the Boer War and four were still in service in 1906 with the Army Service Corps which progressively took over responsibility for transport from the Royal Engineers between 1903 and 1906.[59]

Works
Number 		Sapper
Number 		Nominal
horsepower 		Delivery
date 		Type Unit Remarks
437 1 6 14 Dec 1868 Traction engine War Office, Chatham Named "Prince Arthur"
554 6 20 Oct 1870 Portable engine War Office, Shoeburyness
684 2 6 21 Sep 1871 Traction engine War Office, Chatham
722 9 6 Jan 1872 Agricultural War Office, Shoeburyness Fitted with railway wheels for a trial in 1873
822 3 6 28 Mar 1872 Road locomotive SME, Chatham
829 4 6 1 Apr 1872 Road locomotive SME, Chatham
830 5 6 10 Apr 1872 Road locomotive SME, Chatham An illustration shows it fitted with railway wheels.
831 6 6 17 Apr 1872 Road locomotive SME, Chatham
832 7 6 26 Apr 1872 Road locomotive SME, Chatham
939 8 6 27 Jun 1873 Crane engine SME, Chatham Sent to Africa in the Ashanti expedition.
1306 11 8 1877 Traction engine SME, Chatham
1307 10 8 1877 Traction engine SME, Chatham
1316 12 6 17 Apr 1877 Traction engine SME, Chatham Purchased with railway wheels
1317 13 6 1877 Traction engine SME, Chatham
1424 14 8 30 Apr 1878 Traction engine Dockyard, Woolwich
1425 15 8 26 Apr 1878 Traction engine Dockyard, Woolwich
1426 16 8 30 Apr 1878 Traction engine Dockyard, Woolwich
1427 17 8 20 May 1878 Traction engine Dockyard, Woolwich
1529 8 1879 Traction engine Curragh Camp, Ireland
1593 20 8 1880 Traction engine Bermuda
1611 21 6 15 Jun 1880 Traction engine War Office, Chatham
1621 6 12 Aug 1880 Traction engine Curragh Camp, Ireland
1879 22 6 31 Jul 1883 Traction engine SME, Chatham
2051 8 1885 Road locomotive
2058 24 8 1885 Crane engine Balloon Corps, Chatham Named "Balloon". Fitted with dynamo.
2060 6 27 May 1885 Road locomotive Balloon Corps, Chatham Possibly 1886. Possibly 8 hp.
2095 6 1886 Road locomotive Chatham
2105 ? 6 1886 Traction engine Chatham Possibly 1885. Fitted with dynamo and spring wheels.
Called a steam sapper but number unknown.
2465 4 23 May 1889 Traction engine RLC*, Chatham *Road Locomotive Committee. Possibly built 1880. Fitted with dynamo.
2482 6 26 Mar 1889 Semi portable War Office, Chatham
2749 12 13 Jan 1891 Semi portable Royal Arsenal, Woolwich
2763 7 22 Jan 1891 15T Roller Royal Arsenal, Dublin
2940 5 26 Nov 1891 10T Roller Royal Arsenal
3220 23 6 29 Aug 1893 15T Roller SME, Chatham Convertible
4422 10 4 Nov 1899 Road locomotive "King" type. Sent to South Africa for the Boer War.

In fiction

Three Aveling and Porter products are found in The Railway Series books by the Rev. W. Awdry and the TV series based on the books: George the Steamroller, Trevor the Traction Engine, and Fergus the Railway Traction Engine.

The road roller used in the 1953 comedy film The Titfield Thunderbolt, which has a duel with a railway locomotive, was one of their engines (works number 5590, Maid Marion).[60]

Notes

  1. ↑ Preston 1977, p. 121
  2. 1 2 3 Brown 2004, Aveling, Thomas (1824–1882)
  3. 1 2 3 4 5 Preston 1987, p. 3
  4. 1 2 3 4 5 6 7 Preston 1987, p. 28
  5. ↑ Hinkley 1979, p. 64
  6. 1 2 3 4 5 6 7 8 9 10 Brown 2004, Thomas Lake Aveling (1856–1931)
  7. 1 2 3 Grace 2012
  8. ↑ Preston 1987, p. 4
  9. ↑ Patent No. 1995 of 1859, quoted by Preston 1987, p. 3 and illus. on p.4
  10. ↑ Preston 1987, pp. 4–5
  11. ↑ Patent 891 of 1860
  12. ↑ Preston 1987, p. 3 and illus. on pp.4–5
  13. ↑ Rochester 1999
  14. ↑ Preston 1987, p. 7
  15. ↑ Patent 1295 of 1861
  16. ↑ Patent 61 of 1863
  17. ↑ Quoted in Preston 1977, p. 8
  18. 1 2 3 Preston 1987, pp. 10–11
  19. ↑ Patent 1037 of 1870
  20. 1 2 Preston 1987, p. 13
  21. ↑ Patent 1646 of 1870
  22. ↑ Preston 1987, p. 13 text and reproduction of the patent drawing.
  23. 1 2 Quoted in Preston 1987, p. 29
  24. 1 2 3 Preston 1987, p. 29
  25. ↑ Preston 1987, p. 30
  26. ↑ Quoted in Preston 1987, p. 30
  27. ↑ Preston 1987, pp. 32–33
  28. ↑ Preston 1987, p. 37
  29. ↑ Pointer 1997
  30. ↑ Barford Construction Equipment
  31. ↑ True 2008
  32. ↑ Old Glory February 2009, Engines in Museums p.45
  33. ↑ The Historic Dockyard 2014
  34. ↑ 'Engineering' 1866
  35. 1 2 3 4 5 6 Mullett 1966
  36. 1 2 3 4 5 6 7 8 Yeatman 1966
  37. 1 2 3 Waywell & Jux 2008, p. 197
  38. 1 2 Buckinghamshire Railway Centre 10 March 2011, Aveling and Porter 0-4-0T No. 807
  39. ↑ Buckinghamshire Railway Centre 10 March 2011, Aveling and Porter 0-4-0WT No. 3567 Sydenham
  40. ↑ http://www.trainweb.org/loggingz/aveling.html
  41. 1 2 3 Template:Great North Review Vol 10 No 37 p=285
  42. ↑ Dean, Neale & Smith 1989, p. 72
  43. ↑ Waywell & Jux 2008, Fig 50
  44. ↑ Mitchell & Smith 2000
  45. ↑ Dean, Neale & Smith 1989, p. 109
  46. ↑ Warrington 1971
  47. ↑ http://www.longshopmuseum.co.uk/page/sirapite
  48. ↑ http://www.mdrs.org.uk/2008gallery.htm
  49. ↑ http://homepage.ntlworld.com/candj_simmons/
  50. ↑ Nowers 1994, pp. 3–6
  51. ↑ A private in the Royal Engineers is called a sapper, and the whole regiment known as The Sappers from their earlier task of digging saps or tunnels.
  52. 1 2 Nowers 1994, p. 6
  53. ↑ Preston 1987
  54. ↑ Nowers 1994, pp. 8–9
  55. ↑ Nowers 1994, Appendix I
  56. ↑ Nowers 1994, p. 10
  57. ↑ Nowers 1994, pp. 10–11
  58. ↑ Nowers 1994, p. 16
  59. ↑ Nowers 1994
  60. ↑ 1904 Aveling & Porter IMDB Car Database, 2006

References

External links

Wikimedia Commons has media related to Aveling & Porter.
This article is issued from Wikipedia - version of the Thursday, November 26, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.