Aylsham railway station

This article is about the current BVR railway station.
 For the former GER station, see Aylsham South railway station. For the former M&GN station, see Aylsham North railway station.For the present National Rail station see Aylesham railway station

Aylsham

Main entrance to Aylsham railway station.
Location
Place Aylsham
Area Broadland, Norfolk
Grid reference TR153347
Operations
Managed by BVR
Platforms 3 open (originally 4)
History
10 July 1990 Opened
Stations on heritage railways in the United Kingdom
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
UK Railways portal

Aylsham railway station is located in the town of Aylsham in Norfolk and is the northern terminus of the Bure Valley Railway, a narrow gauge operation which reuses some of the trackbed of a former standard gauge branch line, closed in 1977. The station occupies the same site as the former Aylsham South railway station, which operated here between 1880 and 1952.

History

Aylsham South railway station, the first on this site, opened in 1880.[1] It was operated by the East Norfolk Railway, then the Great Eastern Railway, and became part of the London and North Eastern Railway during the Grouping of 1923. The station passed into the Eastern Region of British Railways on nationalisation in 1948. In 1952 the passenger service stopped, and the freight service was discontinued in 1977. The fine period station buildings stood after closure until 1990, when the Bure Valley Railway opened. Taking over the site, the original buildings were deemed unsuitable and too derelict for the new project, and were demolished.[2] The new Aylsham railway station was constructed on the site, and opened on 10 July 1990.

Facilities

A train prepares to depart from platform 2 at Aylsham railway station.

The station has three platforms. Platform 3 sees only occasional passenger use, but is used for stock storage. Platforms 1 and 2 are in regular use. Both are linked to a central locomotive release road. These two platforms and the central release road are all supplied with terminal headshunts, all of which are linked via a complex tri-directional set of points. Platforms 1 and 2, and the release road, are all protected by an overall station roof. (These platforms were originally numbered 2, 3, and 4, but were re-numbered as 1, 2, and 3 as the original platform 1 had been subsumed into the new Aylsham locomotive depot.)

The modern station buildings contain a cafeteria, booking office, staff room, shop, administrative offices, toilets, and entrance foyer. Additionally, a substantial wooden building has been set up on platform 3 by the supporters association, the Friends of the Bure Valley Railway. There is a large car park.

Alongside the station is the railway's Aylsham Locomotive Depot, a large three-track engine shed, capable of housing all the railway's locomotives. Behind the locomotive depot is the railway's main engineering workshop, equipped to carry out running repairs or full-scale locomotive overhauls. This facility also contains locker rooms, wash rooms, and administrative offices for the railway's engineers.

The operating facilities of the station also include a turntable, several sidings (used primarily for engineering vehicles), facilities for fueling and watering locomotives, and a signal box containing the main line control centre, from which computerised control and radio communication are used to operate the block section system of train control.


Preceding station   Heritage railways Following station
Terminus   Bure Valley Railway   Brampton

References

  1. ↑ Branch opening recorded here.
  2. ↑ Norfolk By Rail.

External sources

Coordinates: 52°47′26″N 1°15′14″E / 52.79050°N 1.25393°E / 52.79050; 1.25393

This article is issued from Wikipedia - version of the Friday, April 22, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.