Boyce–Codd normal form

Boyce–Codd normal form (or BCNF or 3.5NF) is a normal form used in database normalization. It is a slightly stronger version of the third normal form (3NF). BCNF was developed in 1974 by Raymond F. Boyce and Edgar F. Codd to address certain types of anomalies not dealt with by 3NF as originally defined.[1]

If a relational schema is in BCNF then all redundancy based on functional dependency has been removed, although other types of redundancy may still exist. A relational schema R is in Boyce–Codd normal form if and only if for every one of its dependencies X → Y, at least one of the following conditions hold:[2]

Chris Date has pointed out that a definition of what we now know as BCNF appeared in a paper by Ian Heath in 1971.[3] Date writes:

"Since that definition predated Boyce and Codd's own definition by some three years, it seems to me that BCNF ought by rights to be called Heath normal form. But it isn't."[4]

Edgar F. Codd released his original paper 'A Relational Model of Data for Large Shared Databanks' in June 1970. This was the first time the notion of a relational database was published. All work after this, including the Boyce-Codd normal form method was based on this relational model.

3NF table not meeting BCNF (Boyce–Codd normal form)

Only in rare cases does a 3NF table not meet the requirements of BCNF. A 3NF table that does not have multiple overlapping candidate keys is guaranteed to be in BCNF.[5] Depending on what its functional dependencies are, a 3NF table with two or more overlapping candidate keys may or may not be in BCNF.

An example of a 3NF table that does not meet BCNF is:

Today's Court Bookings
CourtStart TimeEnd TimeRate Type
109:3010:30SAVER
111:0012:00SAVER
114:0015:30STANDARD
210:0011:30PREMIUM-B
211:3013:30PREMIUM-B
215:0016:30PREMIUM-A

The table's superkeys are:

Note that even though in the above table Start Time and End Time attributes have no duplicate values for each of them, we still have to admit that in some other days two different bookings on court 1 and court 2 could start at the same time or end at the same time. This is the reason why {Start Time} and {End Time} cannot be considered as the table's superkeys.

However, only S1, S2, S3 and S4 are candidate keys (that is, minimal superkeys for that relation) because e.g. S1 ⊂ S5, so S5 cannot be a candidate key.

Recall that 2NF prohibits partial functional dependencies of non-prime attributes (i.e. an attribute that does not occur in ANY candidate key) on candidate keys, and that 3NF prohibits transitive functional dependencies of non-prime attributes on candidate keys.

In Today's Court Bookings table, there are no non-prime attributes: that is, all attributes belong to some candidate key. Therefore the table adheres to both 2NF and 3NF.

The table does not adhere to BCNF. This is because of the dependency Rate Type → Court in which the determining attribute Rate Type on which Court depends is neither a candidate key nor a superset of a candidate key.

Dependency Rate Type → Court is respected since a Rate Type should only ever apply to a single Court.

The design can be amended so that it meets BCNF:

Rate Types
Rate TypeCourtMember Flag
SAVER1Yes
STANDARD1No
PREMIUM-A2Yes
PREMIUM-B2No
Today's Bookings
Member FlagCourtStart TimeEnd Time
Yes109:3010:30
Yes111:0012:00
No114:0015:30
No210:0011:30
No211:3013:30
Yes215:0016:30

The candidate keys for the Rate Types table are {Rate Type} and {Court, Member Flag}; the candidate keys for the Today's Bookings table are {Court, Start Time} and {Court, End Time}. Both tables are in BCNF. When {Rate Type} is a key in the Rate Types table, having one Rate Type associated with two different Courts is impossible, so by using {Rate Type} as a key in the Rate Types table, the anomaly affecting the original table has been eliminated.

Achievability of BCNF

In some cases, a non-BCNF table cannot be decomposed into tables that satisfy BCNF and preserve the dependencies that held in the original table. Beeri and Bernstein showed in 1979 that, for example, a set of functional dependencies {AB → C, C → B} cannot be represented by a BCNF schema.[6] Thus, unlike the first three normal forms, BCNF is not always achievable.

Consider the following non-BCNF table whose functional dependencies follow the {AB → C, C → B} pattern:

Nearest Shops
PersonShop TypeNearest Shop
DavidsonOpticianEagle Eye
DavidsonHairdresserSnippets
WrightBookshopMerlin Books
FullerBakeryDoughy's
FullerHairdresserSweeney Todd's
FullerOpticianEagle Eye

For each Person / Shop Type combination, the table tells us which shop of this type is geographically nearest to the person's home. We assume for simplicity that a single shop cannot be of more than one type.

The candidate keys of the table are:

Because all three attributes are prime attributes (i.e. belong to candidate keys), the table is in 3NF. The table is not in BCNF, however, as the Shop Type attribute is functionally dependent on a non-superkey: Nearest Shop.

The violation of BCNF means that the table is subject to anomalies. For example, Eagle Eye might have its Shop Type changed to "Optometrist" on its "Fuller" record while retaining the Shop Type "Optician" on its "Davidson" record. This would imply contradictory answers to the question: "What is Eagle Eye's Shop Type?" Holding each shop's Shop Type only once would seem preferable, as doing so would prevent such anomalies from occurring:

Shop Near Person
PersonShop
DavidsonEagle Eye
DavidsonSnippets
WrightMerlin Books
FullerDoughy's
FullerSweeney Todd's
FullerEagle Eye
Shop
ShopShop Type
Eagle EyeOptician
SnippetsHairdresser
Merlin BooksBookshop
Doughy'sBakery
Sweeney Todd'sHairdresser

In this revised design, the "Shop Near Person" table has a candidate key of {Person, Shop}, and the "Shop" table has a candidate key of {Shop}. Unfortunately, although this design adheres to BCNF, it is unacceptable on different grounds: it allows us to record multiple shops of the same type against the same person. In other words, its candidate keys do not guarantee that the functional dependency {Person, Shop Type} → {Shop} will be respected.

A design that eliminates all of these anomalies (but does not conform to BCNF) is possible. This design introduces a new normal form, known as Elementary Key Normal Form.[7] This design consists of the original "Nearest Shops" table supplemented by the "Shop" table described above. The table structure generated by Bernstein's schema generation algorithm[8] is actually EKNF, although that enhancement to 3NF had not been recognized at the time the algorithm was designed:

Nearest Shops
PersonShop TypeNearest Shop
DavidsonOpticianEagle Eye
DavidsonHairdresserSnippets
WrightBookshopMerlin Books
FullerBakeryDoughy's
FullerHairdresserSweeney Todd's
FullerOpticianEagle Eye
Shop
ShopShop Type
Eagle EyeOptician
SnippetsHairdresser
Merlin BooksBookshop
Doughy'sBakery
Sweeney Todd'sHairdresser

If a referential integrity constraint is defined to the effect that {Shop Type, Nearest Shop} from the first table must refer to a {Shop Type, Shop} from the second table, then the data anomalies described previously are prevented.

References

  1. Codd, E. F. "Recent Investigations into Relational Data Base Systems." IBM Research Report RJ1385 (April 23, 1974). Republished in Proc. 1974 Congress (Stockholm, Sweden, 1974). New York, N.Y.: North-Holland (1974).
  2. Silberschatz, Abraham (2006). Database System Concepts (6th ed.). McGraw-Hill. p. 333. ISBN 978-0-07-352332-3.
  3. Heath, I. "Unacceptable File Operations in a Relational Database." Proc. 1971 ACM SIGFIDET Workshop on Data Description, Access, and Control, San Diego, Calif. (November 11th12th, 1971).
  4. Date, C.J. Database in Depth: Relational Theory for Practitioners. O'Reilly (2005), p. 142.
  5. Vincent, M.W. and B. Srinivasan. "A Note on Relation Schemes Which Are in 3NF But Not in BCNF." Information Processing Letters 48(6), 1993, pp. 281–83.
  6. Beeri, Catriel and Bernstein, Philip A. "Computational problems related to the design of normal form relational schemas." ACM Transactions on Database Systems 4(1), March 1979, p. 50.
  7. Zaniolo, Carlo. "A New Normal Form for the Design of Relational Database Schemata." ACM Transactions on Database Systems 7(3), September 1982, pp. 493.
  8. Bernstein, P.A. "Synthesizing Third Normal Form relations from functional dependencies." ACM Transactions on Database Systems 1(4), December 1976 pp. 277-298.

Bibliography

  • Date, C. J. (1999). An Introduction to Database Systems (8th ed.). Addison-Wesley Longman. ISBN 0-321-19784-4.

External links

This article is issued from Wikipedia - version of the Thursday, March 10, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.