BMW R12
.jpg) | |
| Manufacturer | BMW |
|---|---|
| Production | 1935-1942 |
| Assembly | Munich, Germany |
| Predecessor | R11 |
| Class | boxer |
| Engine | Two-cylinder boxer 745cm³ - 18 hp at 3400 rev / min (20 hp at 4000 rev / min in the version with two carburetors) |
| Bore / stroke | 78 mm |
| Compression ratio | 5.2: 1 |
| Top speed | 110 km (68 mi) - 120 km (75 mi)[1][2] |
| Power | 18 hp (13 kW)[1] |
| Ignition type | Magneto or battery ignition |
| Transmission | Manual |
| Tires | 3.50 x 19 |
| Dimensions |
L: 210 cm (83 in) W: 90 cm (35 in) H: 94 cm (37 in) |
| Fuel capacity | 14 litres |
| Fuel consumption | 3.5-4L (every 100km)[1] |
| Related | R17 |
The BMW R12 is a pre-World War II motorcycle that was produced by the German car manufacturing company BMW. The motorbike was first presented and developed in 1935.[3] A total of 36,000 motorcycles were built by 1942.
History
On 14 February 1935, BMW presented the R12 together with the BMW R17 on the German Automobile Exhibition in Berlin for the first time, being a direct successor to the BMW R11.[4] This and the R17 were the first in the world being produced with hydraulically damped telescopic forks.[5] By 1942, the total number of BMW R12 motorcycles manufactured was 36,000.[2] For military purposes, the Einvergasermotor was only available for the R12.[6]
Description
Engine
The engine, designated M 56 S 6 or 212, was a twin-cylinder boxer configuration - four stroke with a flathead design.[1] The BMW R12 with two carburetors used a battery ignition, while R12's with an Einvergasermotor used a magneto ignition, capable of working independently from the battery.
Drive
The BMW R12 had a claw-switched four-speed manual gearbox. Operation was via a hand operated shift lever with the end alongside the fuel tank near the rider's right hand. Several detail variations were seen in production. In common with most BMW Motorcycles, final drive was via shaft, with the drive shaft on the right side of the motorcycle.
Suspension and brakes
Front suspension used a telescopic fork, while the frame was rigid with an un-sprung rear end supporting the final drive and a sprung seat for the rider. The R12 used drum brakes front and rear. Many R12's were equipped with a sidecar attached to the motorcycle's right side.
Specifications
| Characteristics | R 12 with a carburetor[1] | R 12 with two carburetors [2] |
|---|---|---|
| Drilling | 78 mm | |
| Stroke | 78 mm | |
| Capacity | 745 cm³ | |
| Compression ratio | 5,2 : 1 | |
| Performance | 18 hp (13 kW) | 20 hp (15 kW) |
| Top speed | 110 km/h | 120 km/h |
| Tare | 162 kg | |
| Fuel capacity | 14 Liter | |
Surviving motorcycles
One example of a surviving BMW R12 motorcycle can be found in the Museum of Military History in Vienna, still bearing its original camouflage.[7] Some R12's remain in service with private collectors.
See also
References
- 1 2 3 4 5 "BMW R 12 Einvergaser" (in German). BMW Archive Group. Retrieved 3 March 2015.
- 1 2 3 "BMW R 12 Zweivergaser." (in German). BMW Group Archive. Retrieved 3 March 2015.
- ↑ "BMW R 12 Schnittzeichnung der Telegabel" (in German). BMW Group Archive. Retrieved 3 March 2015.
- ↑ "BMW präsentiert bei den Modellen R 12 und R 17 die weltweit erste hydraulische Teleskopgabel" (in German). BMW Archive Group. Retrieved 3 March 2015.
- ↑ Setright, L. J. K. (1977). Bahnstormer: The story of BMW Motor cycles. Transport Bookman Publications. p. 47. ISBN 0-85184-021-3.
- ↑ Zeyen, Wolfgang; Leek, Jan (2004). BMW: die Motorräder seit 1923 (1. Auflage ed.). Stuttgart: Motorbuch Verlag. pp. 71–88. ISBN 3-613-02401-2.
- ↑ Rauchensteiner, Manfried (2000). Das Heeresgeschichtliche Museum in Wien (in German). Graz: Styria. p. 92. ISBN 978-3-222-12834-9.
External links
 |
Wikimedia Commons has media related to BMW 12. |
| ||||||||||||||||||||||||||||||||||||||||||||