Bearhawk LSA
| LSA | |
|---|---|
 | |
| Role | Amateur-built Light-sport aircraft |
| National origin | United States |
| Manufacturer | Bearhawk Aircraft |
| Designer | Bob Barrows |
| Introduction | 2012 |
| Status | Plans available (2012), Kit available (2013) |
| Unit cost | |
The Bearhawk LSA is an American amateur-built light-sport aircraft, designed by Bob Barrows and produced by Bearhawk Aircraft of Austin, Texas. The aircraft is supplied in the form of plans or a kit for amateur construction.[1][2][3]
The aircraft was introduced to the public at AirVenture 2012.[1]
Design and development
The Bearhawk LSA is a new "clean sheet design" inspired by the styling and construction methods of the larger and heaver Barrows Bearhawk. The LSA features a strut-braced high-wing, a two-seats-in-tandem enclosed cockpit accessed by doors, fixed conventional landing gear and a single engine in tractor configuration. The cockpit is 31 in (79 cm) wide.[1] In 2015 a quick-build kit was introduced at the U.S Sport Aviation Expo.[4]
The aircraft fuselage is made welded 4130 steel tubing covered in doped aircraft fabric. Its wing has an aluminum structure, covered in flush riveted aluminum sheet, employs a new Harry Riblett-designed airfoil and lacks flaps. The wing is supported by a single strut per side. The engine power range is 65 to 100 hp (48 to 75 kW) and engines recommended include the 65 hp (48 kW) Continental A-65, 75 hp (56 kW) Continental A-75 and the 100 hp (75 kW) Continental O-200 four-stroke powerplants.[1][5][6]
The aircraft was designed for a maximum gross weight of 1,500 lb (680 kg) in the utility category, but is limited to 1,320 lb (600 kg) in the US light-sport aircraft category.
Operational history
In February 2016, four examples were registered in the United States with the Federal Aviation Administration.[7]
Specifications (LSA)
Data from Kitplanes and Bob Barrows[1][5]
General characteristics
- Crew: one
- Capacity: one passenger
- Length: 22 ft 3 in (6.78 m)
- Wingspan: 34 ft (10 m)
- Height: 6 ft 3 in (1.91 m) in three-point
- Wing area: 170 sq ft (16 m2)
- Airfoil: Custom Harry Riblett airfoil
- Empty weight: 720 lb (327 kg)
- Gross weight: 1,320 lb (599 kg)
- Fuel capacity: 30 U.S. gallons (110 L; 25 imp gal)
- Powerplant: 1 × Continental A-75 four cylinder, air-cooled, four stroke aircraft engine, 75 hp (56 kW)
- Propellers: 2-bladed aluminium
Performance
- Cruise speed: 125 mph (109 kn; 201 km/h)
- Stall speed: 30 mph (26 kn; 48 km/h)
- Never exceed speed: 140 mph (122 kn; 225 km/h)
References
- 1 2 3 4 5 Bernard, Mary and Suzanne B. Bopp: Bearhawk Aircraft: Bearhawk LSA, Kitplanes, Volume 29, Number 12, December 2012, page 23-24. Belvoir Publications. ISSN 0891-1851
- ↑ Bearhawk Aircraft (2012). "The Bearhawk LSA". Retrieved 20 November 2012.
- ↑ Bearhawk Aircraft (15 December 2014). "Bearhawk LSA". Archived from the original on 26 July 2013. Retrieved 29 December 2014.
- ↑ "Briefly Noted". Sport Aviation: 15. March 2015.
- 1 2 Barrows, Bob (2012). "Specifications". Retrieved 20 November 2012.
- ↑ Federal Aviation Administration (20 November 2012). "Registration Inquiry Results - N289EH". Retrieved 20 November 2012.
- ↑ Federal Aviation Administration (26 February 2016). "Make / Model Inquiry Results". Retrieved 26 February 2016.
External links
 |
Wikimedia Commons has media related to Bearhawk LSA. |
| ||||||