Thiophenol
| |||
Names | |||
---|---|---|---|
IUPAC name
Thiophenol | |||
Other names
Benzenethiol, Phenyl mercaptan, Mercaptobenzene | |||
Identifiers | |||
108-98-5 | |||
ChEBI | CHEBI:48498 | ||
ChEMBL | ChEMBL119405 | ||
ChemSpider | 7681 | ||
Jmol interactive 3D | Image | ||
PubChem | 7969 | ||
RTECS number | DC0525000 | ||
UNII | 7K011JR4T0 | ||
| |||
| |||
Properties | |||
C6H6S | |||
Molar mass | 110.19 g/mol | ||
Appearance | colorless liquid, with unpleasant odour. | ||
Density | 1.0766 g/mL | ||
Melting point | −15 °C (5 °F; 258 K) | ||
Boiling point | 169 °C (336 °F; 442 K) | ||
0.08% in water, 25°C[1] | |||
Solubility | Most organic solvents; aqueous base | ||
Vapor pressure | 1 mmHg (18°C)[1] | ||
Acidity (pKa) | 6.62 (H2O),[2] 10 (DMSO)[3] | ||
Hazards | |||
Main hazards | Toxic | ||
R-phrases | R10 R24/25 R26 R41 | ||
S-phrases | S23 S26 S28 S36/37/39 S45 | ||
Flash point | 56 °C; 132 °F; 329 K[1] | ||
US health exposure limits (NIOSH): | |||
PEL (Permissible) |
none[1] | ||
REL (Recommended) |
C 0.1 ppm (0.5 mg/m3) [15-minute][1] | ||
IDLH (Immediate danger |
N.D.[1] | ||
Related compounds | |||
Related thiols |
1,2-Benzenedithiol Benzenemethanethiol | ||
Related compounds |
Phenol Benzeneselenol Diphenyl disulfide | ||
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). | |||
verify (what is ?) | |||
Infobox references | |||
Thiophenol is an organosulfur compound with the formula C6H5SH, sometimes abbreviated as PhSH. This foul-smelling colourless liquid is the simplest aromatic thiol. The chemical structures of thiophenols are analogous to phenols except the oxygen atom in the hydroxyl group (-OH) bonded to the aromatic ring is replaced by a sulfur atom. The prefix thio- implies a sulfur-containing compound and when used before a root word name for a compound which would normally contain an oxygen atom, in the case of 'thiol' that the alcohol oxygen atom is replaced by a sulfur atom.
Thiophenols also describes a class of compounds formally derived from thiophenol itself. All have a sulfhydryl group (-SH) covalently bonded to an aromatic ring. The organosulfur ligand in the medicine thiomersal is a thiophenol.
Synthesis
There are several methods of synthesis for thiophenol and related compounds, although thiophenol itself is usually purchased for laboratory operations. Methods are the reduction of benzenesulfonyl chloride with zinc.[4] and the action of elemental sulfur on phenyl magnesium halide or phenyllithium followed by acidification.
Via the Newman–Kwart rearrangement, phenols (1) can be converted to the thiophenols (5) by conversion to the O-aryl dialkylthiocarbamates (3), followed by heating to give the isomeric S-aryl derivative (4).[5]
In the Leuckart thiophenol reaction the starting material is an aniline through the diazonium salt (ArN2X) and the xanthate (ArS(C=S)OR) [6][7]
Thiophenol can be manufactured from chlorobenzene and hydrogen sulfide over alumina at 700 to 1,300 °F (371 to 704 °C). The disulfide is the primary byproduct.[8] The reaction medium is corrosive and requires ceramic or similar reactor lining.
Properties
Acidity
Thiophenol has appreciably greater acidity than does phenol. Thiophenol has a pKa of 6 vs 10 for phenol. A similar pattern is seen for H2S vs. H2O and all thiols vs. the corresponding alcohols. Treatment of PhSH with strong base such as sodium hydroxide (NaOH) or sodium metal affords the salt sodium thiophenolate (PhSNa).
Alkylation
The thiophenolate is highly nucleophilic, which translates to a high rate of alkylation.[9] Thus, treatment of C6H5SH with methyl iodide in the presence of a base gives methyl phenyl sulfide, C6H5SCH3, a thioether. Such reactions are fairly irreversible. C6H5SH also adds to α,β-unsaturated carbonyls via Michael addition.
Oxidation
Thiophenols, especially in the presence of base are easily oxidized to diphenyl disulfide:
- 2 C6H5SH + 1/2 O2 → C6H5S-SC6H5 + H2O
The disulfide can be reduced back the thiol using sodium borohydride followed by acidification. This redox reaction is also exploited in the use of C6H5SH as a source of H atoms.
Chlorination
Phenylsulfenyl chloride, a blood-red liquid (b.p. 41–42 °C, 1.5 mm Hg), can be prepared by the reaction of thiophenol with chlorine (Cl2).[10]
Coordination to metals
Metal cations form thiophenolates, some of which are polymeric. One example is "C6H5SCu," obtained by treating copper(I) chloride with thiophenol.[11]
Safety
Thiophenol is an irritant and toxic by ingestion, absorption through skin, or inhalation. This chemical is also flammable. The US National Institute for Occupational Safety and Health has established a recommended exposure limit at a ceiling of 0.1 ppm (0.5 mg/m3), and exposures not greater than 15 minutes.[12]
References
- 1 2 3 4 5 6 "NIOSH Pocket Guide to Chemical Hazards #0050". National Institute for Occupational Safety and Health (NIOSH).
- ↑ Cox, Brian G. Acids and Bases: Solvent Effects on Acid-base Strength. 1st ed. Oxford, UK: Oxford UP, 2013.
- ↑ Arnett, E.M., Venkatasubremanian, K.G., J. Org. Chem., 1983, 48, 1569.
- ↑ Adams, R.; C. S. Marvel, C. S. "Thiophenol". Org. Synth.; Coll. Vol. 1, p. 504.
- ↑ Melvin S. Newman and Frederick W. Hetzel (1990). "Thiophenols from Phenols: 2-Naphthalenethiol". Org. Synth.; Coll. Vol. 6, p. 824
- ↑ Leuckart, J. prakt. Chem., [2] 41, 189 (1890).
- ↑ D. S. Tarbell and D. K. Fukushima "m-Thiocresol" Org. Synth. 1947, volume 27, p. 81. doi: 10.15227/orgsyn.027.0081
- ↑ US Patent 2,490,257, Duncan J. Crowley & Alvin L Kosak, "Mono- and Polyalkyl Mono- and Polynuclear Mercaptans", issued 1949-12-06, assigned to Socony-Vacuum Oil Co.
- ↑ Campopiano, O. "Thiophenol" in Encyclopedia of Reagents for Organic Synthesis (Ed: L. Paquette) 2004, J. Wiley & Sons, New York. doi:10.1002/047084289.
- ↑ Barrett, A. G. M.; Dhanak, D.; Graboski, G. G.; Taylor, S. J. (1993). "(Phenylthio)nitromethane". Org. Synth.; Coll. Vol. 8, p. 550
- ↑ Posner, G. H.; Whitten, C. E. "Secondary and Tertiary Alkyl Ketones from Carboxylic Acid Chlorides and Lithium Phenylthio(alkyl)cuprate Reagents: tert-Butyl Phenyl Ketone". Org. Synth.; Coll. Vol. 6, p. 248
- ↑ CDC - NIOSH Pocket Guide to Chemical Hazards
|