Bernard SIMB AB 12

AB 12
Role	Single-seat fighter
National origin	France
Manufacturer	Société Industrielle des Métaux et du Bois (SIMB), sometimes referred to as Ferbois
Designer	Jean Galtier
First flight	May 1926
Number built	1

The Bernard SIMB AB 12 was a French single engine, single-seat monoplane fighter aircraft built in the 1920s. Though advanced for its time, it failed to gain a production order and only one was built.

Design and development

Like the Bernard SIMB AB 10, the AB 12 was an all-metal, single-seat, monoplane fighter with a low cantilever wing. It differed from the AB10 in having a radial engine, a more conventional undercarriage and four machine guns. The wing plans of both aircraft were similar, straight tapered with squared tips, though the AB 12 had a span 1 m (3.3 ft) greater. The empennage of both designs was also similar: the AB 12 had a tailplane with swept leading edges and separate elevators mounted on top of the fuselage and a wide chord, almost straight edged fin, though its rudder, moving between the elevators, ended on the upper fuselage line. The fuselage had an oval cross section with the open cockpit over the wing, a short, faired headrest behind it.^[1]

The AB 12 was powered by a 313 kW (420 hp) Gnome-Rhône 9Ab radial, a licence-built Bristol Jupiter. By the standards of the day this was quite well cowled-in for a radial but the cylinder heads protruded for cooling. The details of the gun mounting are not clear, but images show at least one on the starboard side firing through a slot in the nose just above mid-height, the opening extending between two cylinders. The undercarriage of the AB 12 was quite conventional and very different from that of the AB 10. It had a pair of single mainwheels mounted on a single, faired axle, with V-form legs attached to the lower fuselage. The tricycle gear was completed by a tailskid.^[1]

Overall, the AB 12 was 40% more powerful but less aerodynamically clean and 7% heavier than the AB 10, so its maximum speed was only 6% higher. Monoplanes in a biplane era, neither design received a production order and only one of each was built.^[1]

Specifications

Data from Liron^[1]

General characteristics

Crew: 1
Length: 7.20 m (23 ft 7 in)
Wingspan: 12.00 m (39 ft 4 in)
Height: 2.70 m (8 ft 10 in)
Wing area: 21.00 m² (226.0 sq ft)
Empty weight: 900 kg (1,984 lb)
Gross weight: 1,450 kg (3,197 lb)
Powerplant: 1 × Gnome-Rhône 9Ab 9-cylinder radial, 310 kW (420 hp)
Propellers: 2-bladed

Performance

Maximum speed: 260 km/h (162 mph; 140 kn)
Service ceiling: 8,500 m (27,887 ft)

Armament

Guns: 4×7.7 mm (0.303 in) machine guns, 2 Vickers and 2 Darne

References

1 2 3 4 Liron, J.L. (1990). Les avions Bernard. Paris: Éditions Larivère. pp. 178–9, 224.

External links

Wikimedia Commons has media related to Bernard aircraft.

Bernard 12 (Sic)

Aircraft produced by Adolphe Bernard, Société Industrielle des Métaux et du Bois (Ferbois) and Société des Avions Bernard

Adolphe Bernard	AB 1 AB 2 AB 3 AB 4

S.I.M.B.	AB.C1 AB 3M AB 3T V.1 V.2 V.3 AB 10 AB 10T AB 12 AB 14 AB 15 AB 16

S.A.B.	18 T 18 GR 181 GR 18 T Bis 190 T 191 T 191 GR 192 T 193 T 194 T 195 T 197 GR 20 30 T H.V.40 H.V.41 H.V.42 H.52 60 T 61 T 70 71 S-72 S-73 74 S 75 80 GR 81 GR 82 84 GR 86 H 110 HV 120 160 161 200 T 200 TS 201 T 205 T 207 T HV 220 260 HV 320 510 T V.4

This article is issued from Wikipedia - version of the Tuesday, June 23, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.