Sampling bias

In statistics, sampling bias is a bias in which a sample is collected in such a way that some members of the intended population are less likely to be included than others. It results in a biased sample, a non-random sample[1] of a population (or non-human factors) in which all individuals, or instances, were not equally likely to have been selected.[2] If this is not accounted for, results can be erroneously attributed to the phenomenon under study rather than to the method of sampling.

Medical sources sometimes refer to sampling bias as ascertainment bias.[3][4] Ascertainment bias has basically the same definition,[5][6] but is still sometimes classified as a separate type of bias.[5]

Distinction from selection bias

Sampling bias is mostly classified as a subtype of selection bias,[7] sometimes specifically termed sample selection bias,[8][9][10] but some classify it as a separate type of bias.[11] A distinction, albeit not universally accepted, of sampling bias is that it undermines the external validity of a test (the ability of its results to be generalized to the rest of the population), while selection bias mainly addresses internal validity for differences or similarities found in the sample at hand. In this sense, errors occurring in the process of gathering the sample or cohort cause sampling bias, while errors in any process thereafter cause selection bias.

However, selection bias and sampling bias are often used synonymously.[12]

Types of sampling bias

Symptom-based sampling

The study of medical conditions begins with anecdotal reports. By their nature, such reports only include those referred for diagnosis and treatment. A child who can't function in school is more likely to be diagnosed with dyslexia than a child who struggles but passes. A child examined for one condition is more likely to be tested for and diagnosed with other conditions, skewing comorbidity statistics. As certain diagnoses become associated with behavior problems or intellectual disability, parents try to prevent their children from being stigmatized with those diagnoses, introducing further bias. Studies carefully selected from whole populations are showing that many conditions are much more common and usually much milder than formerly believed.

Truncate selection in pedigree studies

Simple pedigree example of sampling bias

Geneticists are limited in how they can obtain data from human populations. As an example, consider a human characteristic. We are interested in deciding if the characteristic is inherited as a simple Mendelian trait. Following the laws of Mendelian inheritance, if the parents in a family do not have the characteristic, but carry the allele for it, they are carriers (e.g. a non-expressive heterozygote). In this case their children will each have a 25% chance of showing the characteristic. The problem arises because we can't tell which families have both parents as carriers (heterozygous) unless they have a child who exhibits the characteristic. The description follows the textbook by Sutton.[13]

The figure shows the pedigrees of all the possible families with two children when the parents are carriers (Aa).

The probabilities of each of the families being selected is given in the figure, with the sample frequency of affected children also given. In this simple case, the researcher will look for a frequency of 47 or 58 for the characteristic, depending on the type of truncate selection used.

The caveman effect

An example of selection bias is called the "caveman effect". Much of our understanding of prehistoric peoples comes from caves, such as cave paintings made nearly 40,000 years ago. If there had been contemporary paintings on trees, animal skins or hillsides, they would have been washed away long ago. Similarly, evidence of fire pits, middens, burial sites, etc. are most likely to remain intact to the modern era in caves. Prehistoric people are associated with caves because that is where the data still exists, not necessarily because most of them lived in caves for most of their lives.

Problems caused by sampling bias

A biased sample causes problems because any statistic computed from that sample has the potential to be consistently erroneous. The bias can lead to an over- or under-estimation of the corresponding parameter in the population. Almost every sample in practice is biased because it is practically impossible to ensure a perfectly random sample. If the degree of misrepresentation is small, the sample can be treated as a reasonable approximation to a random sample. Also, if the group that is underrepresented does not differ markedly from the other groups in the quantity being measured, then a random sample can still be a reasonable approximation.

The word bias has a strong negative connotation. Indeed, biases sometimes come from deliberate intent to mislead or other scientific fraud. In statistical usage, bias merely represents a mathematical property, no matter if it is deliberate or either unconscious or due to imperfections in the instruments used for observation. While some individuals might deliberately use a biased sample to produce misleading results, more often, a biased sample is just a reflection of the difficulty in obtaining a truly representative sample, or ignorance of the bias in their process of measurement or analysis. An example of how ignorance of a bias can exist is in the widespread use of a ratio (a.k.a. 'fold change) as a measure of difference in biology. Because it is easier to achieve a large ratio with two small numbers with a given difference, and relatively more difficult to achieve a large ratio with two large numbers with a larger difference, large a significant differences may be missed when comparing relatively large numeric measurements. Some have called this a 'demarcation bias' because the use of a ratio (division) instead of a difference (subtraction) removes the results of the analysis from science into pseudoscience (See Demarcation Problem).

Some samples use a biased statistical design which nevertheless allows the estimation of parameters. The U.S. National Center for Health Statistics, for example, deliberately oversamples from minority populations in many of its nationwide surveys in order to gain sufficient precision for estimates within these groups.[14] These surveys require the use of sample weights (see later on) to produce proper estimates across all ethnic groups. Provided that certain conditions are met (chiefly that the weights are calculated and used correctly) these samples permit accurate estimation of population parameters.

Historical examples

Example of biased sample: as of June 2008 55% of web browsers (Internet Explorer) in use did not pass the Acid2 test. Due to the nature of the test, the sample consisted mostly of web developers.[15]

A classic example of a biased sample and the misleading results it produced occurred in 1936. In the early days of opinion polling, the American Literary Digest magazine collected over two million postal surveys and predicted that the Republican candidate in the U.S. presidential election, Alf Landon, would beat the incumbent president, Franklin Roosevelt, by a large margin. The result was the exact opposite. The Literary Digest survey represented a sample collected from readers of the magazine, supplemented by records of registered automobile owners and telephone users. This sample included an over-representation of individuals who were rich, who, as a group, were more likely to vote for the Republican candidate. In contrast, a poll of only 50 thousand citizens selected by George Gallup's organization successfully predicted the result, leading to the popularity of the Gallup poll.

Another classic example occurred in the 1948 presidential election. On election night, the Chicago Tribune printed the headline DEWEY DEFEATS TRUMAN, which turned out to be mistaken. In the morning the grinning president-elect, Harry S. Truman, was photographed holding a newspaper bearing this headline. The reason the Tribune was mistaken is that their editor trusted the results of a phone survey. Survey research was then in its infancy, and few academics realized that a sample of telephone users was not representative of the general population. Telephones were not yet widespread, and those who had them tended to be prosperous and have stable addresses. (In many cities, the Bell System telephone directory contained the same names as the Social Register.) In addition, the Gallup poll that the Tribune based its headline on was over two weeks old at the time of the printing.[16]

Statistical corrections for a biased sample

If entire segments of the population are excluded from a sample, then there are no adjustments that can produce estimates that are representative of the entire population. But if some groups are underrepresented and the degree of underrepresentation can be quantified, then sample weights can correct the bias.

For example, a hypothetical population might include 10 million men and 10 million women. Suppose that a biased sample of 100 patients included 20 men and 80 women. A researcher could correct for this imbalance by attaching a weight of 2.5 for each male and 0.625 for each female. This would adjust any estimates to achieve the same expected value as a sample that included exactly 50 men and 50 women, unless men and women differed in their likelihood of taking part in the survey.

See also

References

  1. Medical Dictionary - 'Sampling Bias' Retrieved on September 23, 2009
  2. TheFreeDictionary – biased sample Retrieved on 2009-09-23. Site in turn cites: Mosby's Medical Dictionary, 8th edition.
  3. Weising, Kurt (2005). DNA fingerprinting in plants: principles, methods, and applications. London: Taylor & Francis Group. p. 180. ISBN 0-8493-1488-7.
  4. Page 34 in: Selection and linkage desequilibrium tests under complex demographies and ascertainment bias Francesc Calafell i Majó, Anna Ramírez i Soriano. July 2008
  5. 1 2 Panacek: Error in research Society for Academic Emergency Medicine. Retrieved on November 14, 2009
  6. medilexicon Medical Dictionary - 'Ascertainment Bias' Retrieved on November 14, 2009
  7. Dictionary of Cancer Terms – Selection Bias Retrieved on September 23, 2009
  8. Ards, Sheila; Chung, Chanjin; Myers, Samuel L. (1998). "The effects of sample selection bias on racial differences in child abuse reporting". Child Abuse & Neglect 22 (2): 103–115. doi:10.1016/S0145-2134(97)00131-2. PMID 9504213.
  9. Cortes, Corinna; Mohri, Mehryar; Riley, Michael; Rostamizadeh, Afshin (2008). "Sample Selection Bias Correction Theory" (PDF). Algorithmic Learning Theory 5254: 38–53. doi:10.1007/978-3-540-87987-9_8.
  10. Cortes, Corinna; Mohri, Mehryar (2014). "Domain adaptation and sample bias correction theory and algorithm for regression" (PDF). Theoretical Computer Science 519: 103–126. doi:10.1016/j.tcs.2013.09.027.
  11. Fadem, Barbara (2009). Behavioral Science. Lippincott Williams & Wilkins. p. 262. ISBN 978-0-7817-8257-9.
  12. Wallace, Robert (2007). Maxcy-Rosenau-Last Public Health and Preventive Medicine (15th ed.). McGraw Hill Professional. p. 21. ISBN 978-0-07-159318-2.
  13. Sutton, Harry Eldon (1988). An Introduction to Human Genetics (4th ed.). Harcourt Brace Jovanovich. ISBN 978-0-15-540099-3.
  14. National Center for Health Statistics (2007). Minority Health.
  15. "Browser Statistics". Refsnes Data. June 2008. Retrieved 2008-07-05.
  16. Based on http://www.uh.edu/engines/epi1199.htm retrieved on September 29, 2007
This article is issued from Wikipedia - version of the Sunday, February 21, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.