Bigsweir Bridge

The bridge, crossing the River Wye

Bigsweir Bridge is an 1827 road bridge crossing the River Wye, straddling the boundary between the parish of St. Briavels, Gloucestershire, England, and Llandogo, Monmouthshire, Wales. It carries the A466 road, and is located about 2 miles (3.2 km) north of the village of Llandogo, 2 miles (3.2 km) south of Whitebrook, and 3 miles (4.8 km) west of the village of St Briavels. It is the Normal Tidal Limit (NTL) of the River Wye, and navigation below this point falls under the jurisdiction of the Gloucester Harbour Trustees.

Locality

There is no village at Bigsweir. The bridge is about 600 metres (660 yd) upstream of the fishing weir and ford of Bigsweir, which is close to Bigsweir House.[1] According to Sir Joseph Bradney, the weir, one of many of ancient origin on the river, was named after Buddig or Budic, the father of Euddogwy or Oudoceus, a 7th-century Welsh bishop who retired to Llandogo. Recorded early spellings of the name include Bikeswere and Brithekeswere.[2]

Fishing rights at Bigsweir were mentioned in the Domesday Book. By 1331 the rights were held by the monks of Tintern Abbey, some 4 miles (6.4 km) downstream of the weir, and there were objections to the abbey raising the level of the weir and so impeding navigation. The rights over the weir transferred to the Earl of Worcester in 1537, later passing to his successors, the Dukes of Beaufort.[3]

Bigsweir House and estate

The Bigsweir estate, on the Gloucestershire side of the weir, was originally part of the lands of the Bishops of Hereford, before the freehold passed to Thomas Catchmay in 1445. It remained the main seat and estate of the Catchmay (or Catchmayde) family for several centuries.[2]

Bigsweir House itself was rebuilt around 1740, probably by William Catchmay (d.1743). It is a building of two storeys built of sandstone, with a symmetrical five-bay front.[3][4] Additions were made to the house after it passed to James Rooke (d.1805). The estate was enlarged by purchases of woodland, and the house itself was refurbished with rich internal decoration, including panelled rooms and elaborate cornices and architraves. Further extensions were added in the 20th century.[5] Bigsweir House is a Grade II listed building, added to the register in 1954.[4]

The bridge

The elegant cast iron road bridge was built in 1827 as part of the new turnpike road constructed up the lower part of the Wye valley between Chepstow and Monmouth. The bridge connects the English and Welsh sides of the river, with an abandoned but recently restored toll house on the Welsh side.[6] The bridge comprises a single arch of 50 metres (55 yd) , and was designed by Charles Hollis of London and cast at Merthyr Tydfil.[7] A pair of stone flood arches were added at each end some years later, doubling the length of the bridge.[7] Because of its narrow width, modern traffic using the A466 is controlled by traffic signals at either end.

Bigsweir Bridge became a Grade II* listed structure in 1988.[8]

See also

References

Wikimedia Commons has media related to Bigsweir.
  1. British History Online - St Briavels
  2. 1 2 Bradney, Sir Joseph (1933). A History of Monmouthshire: The Hundred of Trelech. Mitchell Hughes and Clarke. p. 212. ISBN 1 873361 16 5.
  3. 1 2 St. Briavels at British History Online. Retrieved 11 February 2015
  4. 1 2 Bigsweir House, British Listed Buildings. Retrieved 11 February 2015
  5. David Verey, Gloucestershire: the Vale and the Forest of Dean, The Buildings of England edited by Nikolaus Pevsner, 2nd ed. (1976) ISBN 0-14-071041-8, p.334
  6. "Historic toll house at Bigsweir under restoration". Monmouthshire Beacon. 22 February 2012. Retrieved 30 January 2015.
  7. 1 2 Crow, Alan (1995). Bridges on the River Wye. Lapridge Publications. pp. 144–145. ISBN 0-9518589-9-8.
  8. "Bigsweir Bridge, St Briavels". British Listed Buildings. Retrieved 30 December 2014.

Coordinates: 51°44′40″N 2°40′5″W / 51.74444°N 2.66806°W / 51.74444; -2.66806

This article is issued from Wikipedia - version of the Tuesday, May 26, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.