Brace (tool)
A brace or brace and bit is a hand tool used to drill holes, usually in wood. Pressure is applied to the top and the tool is rotated with a U-shaped grip.
The U-shaped part is a kind of crankshaft. It gives the brace much greater torque than other kinds of hand drill; a brace can be used to drill much wider, and deeper, holes than can a gear-driven hand drill. The price of the greater torque is lower rotational speed; it is easy for a hand drill to achieve a rotational speed of several hundred revolutions per minute, but it requires considerable effort to achieve even 100 rpm with a brace. Due to the design of the brace it tends to be easier than a power drill to keep at a precise 90 degree angle.
The front part of the brace consists of a chuck spindle with V-shaped brackets or clamps inside. Turning the spindle of the chuck in a clockwise direction tightens the drill bit in the chuck and turning in a counter-clockwise direction loosens the bit for removal.
In most braces, immediately behind the chuck is a three position gear release which allows ratcheting of the handle when in tight spots. Turning the gear release from the center position allows ratcheting the brace in the direction needed. Turning the gear release fully clockwise lets it remove wood in a clockwise direction with the ratchet action going counter-clockwise. Placing the gear release fully counter-clockwise then allows turning the brace and bit in a counter-clockwise direction, usually to remove the drill bit from the hole. The center position of the gear release prohibits the ratcheting effect.
The U-shaped crank has a wooden spindle on it and, along with the top spindle, is allowed to freely turn under the hands without producing wear and tear on the hands (thus, no blisters).
The earliest carpenter's braces equipped with a U-shaped grip, that is with a compound crank, appeared between 1420 and 1430 in Flanders.[1]
See also
Hand drills for some related tools, including the type sometimes known as a wheel brace.
References
- ↑ White, Jr. 1962, p. 112
Bibliography
- Eaton, Reg (1989). The Ultimate Brace: A Unique Product of Victorian Sheffield. King's Lynn: Erica Jane Publishing ISBN 978-0-9514695-0-7
- Russell, David R., with Robert Lesage and photographs by James Austin, cataloguing assisted by Peter Hackett (2010). Antique Woodworking Tools: Their Craftsmanship from the Earliest Times to the Twentieth Century Cambridge: John Adamson ISBN 978-1-898565-05-5
- White, Jr., Lynn (1962), Medieval Technology and Social Change, Oxford: At the Clarendon Press
| ||||||||||||||