Penny (British decimal coin)

For the pre-decimal British one penny coin, see Penny (British pre-decimal coin). For silver pennies produced after 1820, see Maundy money.
One penny
United Kingdom
Value 0.01 pound sterling
Mass 3.56 g
Diameter 20.3 mm
Thickness (Bronze) 1.52 mm
(Steel) 1.65 mm
Edge Plain
Composition Bronze (1971–1991)
Copper-plated steel (1992–)
Years of minting 1971–present
Obverse
Design Queen Elizabeth II
Designer Ian Rank-Broadley
Design date 1998
Reverse
Design Segment of the Royal Shield
Designer Matthew Dent
Design date 2008

The British decimal one penny (1p) coin, usually simply known as a penny, is a unit of currency equaling one one-hundredth of a pound sterling. The penny’s symbol is p. Its obverse has featured the profile of Queen Elizabeth II since the coin’s introduction in 1971, the year British currency was decimalised.[1] Four different portraits of the Queen have been used on the coin, with the latest design by Jody Clark being introduced in 2015. The second and current reverse, featuring a segment of the Royal Shield, was introduced in 2008.

The correct plural form for multiple 1p coins is pennies (e.g. fifty pennies). The correct term for monetary amounts of pennies greater than 1p is pence (e.g. one pound and twenty pence).

One penny and two pence coins are legal tender only up to the sum of 20p; this means that it is permissible to refuse payment of sums greater than this amount in 1p and 2p coins in order to settle a debt.[2]

The penny was originally minted from bronze, but since 1992 it has been minted in copper-plated steel due to the increasing price of metal.[3] Soaring copper prices in the mid-2000s caused the value of the copper in the pre-1992 coins (which are 97% copper) to exceed the coins' face value. For example, in May 2006, the intrinsic metal value of a pre-1992 1p coin was about 1.5 pence.[4] During 2008, the value of copper fell dramatically from these peaks.[5]

As of 31 March 2014 there were an estimated 11,278 million 1p coins in circulation, with an estimated total face value of £112.787 million.[6]

The penny is the lowest value coin in circulation (and used) in the United Kingdom. The values of previous low value coins are:

coin value in use withdrawn equivalent 2013 purchasing power when withdrawn[7]
half-farthing 1⁄8 pre-decimal penny 1869/1870 4p–5p
farthing 1⁄4 pre-decimal penny 1960 2p–6p
pre-decimal halfpenny 1⁄2 pre-decimal penny 1971 2½p
pre-decimal penny 1⁄240 pound sterling 1971 5p
decimal halfpenny 1⁄2 decimal penny 1984 1½p–2½p

Design

Original reverse: 1971–2008

The original reverse of the coin, designed by Christopher Ironside, and used from 1971 to 2008, is a crowned portcullis with chains (an adaptation of the Badge of Henry VII which is now the Badge of the Palace of Westminster),[3] with the numeral "1" written below the portcullis, and either NEW PENNY (1971–1981) or ONE PENNY (1982–2008) above the portcullis.[3]

To date, four different obverses have been used. In all cases, the inscription is ELIZABETH II D.G.REG.F.D. 2013,[8] where 2013 is replaced by the year of minting. In the original design both sides of the coin are encircled by dots, a common feature on coins, known as beading.

As with all new decimal currency, until 1984 the portrait of Queen Elizabeth II by Arnold Machin appeared on the obverse,[3] in which the Queen wears the 'Girls of Great Britain and Ireland' Tiara. The words NEW PENNY were inscribed above the portcullis up until 1981. From 1982 the inscription changed to ONE PENNY.

Between 1985 and 1997 the portrait by Raphael Maklouf was used,[3] in which the Queen wears the George IV State Diadem. In 1992 the metal used in minting this coin was switched from bronze to copper-plated steel.

Between 1998 and 2015 the portrait by Ian Rank-Broadley has been used,[3] again featuring the tiara, with a signature-mark IRB below the portrait.

As of June 2015, coins bearing the portrait by Jody Clark have been seen in circulation.

In August 2005 the Royal Mint launched a competition to find new reverse designs for all circulating coins apart from the £2 coin.[9] The winner, announced in April 2008, was Matthew Dent, whose designs were gradually introduced into circulating British coinage from mid-2008.[10] The designs for the 1p, 2p, 5p, 10p, 20p and 50p coins depict sections of the Royal Shield that form the whole shield when placed together. The entire shield is featured on the £1 coin. The 1p coin depicts the left section between the first and third quarter of the shield, representing England and Northern Ireland. The coin's obverse remains largely unchanged, but the beading (the ring of dots around the coin's circumference), which no longer features on the coin's reverse, has also been removed from the obverse.

Mintages

See also

References

External links

This article is issued from Wikipedia - version of the Monday, March 14, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.