Brownian noise

For similar phrases, see Brown note (disambiguation).
Colors of noise
White
Pink
Red (Brownian)
Grey
Brownian noise spectrum

In science, Brownian noise ( Sample ), also known as Brown noise or red noise, is the kind of signal noise produced by Brownian motion, hence its alternative name of random walk noise. The term "Brown noise" comes not from the color, but after Robert Brown, the discoverer of Brownian motion. The term "red noise" comes from the "white noise"/"white light" analogy; red noise is strong in longer wavelengths, similar to the red end of the visible spectrum.

Explanation

The graphic representation of the sound signal mimics a Brownian pattern. Its spectral density is inversely proportional to f², meaning it has more energy at lower frequencies, even more so than pink noise. It decreases in power by 6 dB per octave (20 dB per decade) and, when heard, has a "damped" or "soft" quality compared to white and pink noise. The sound is a low roar resembling a waterfall or heavy rainfall. See also violet noise, which is a 6 dB increase per octave.

Strictly, Brownian motion has a Gaussian probability distribution, but "red noise" could apply to any signal with the 1/f² frequency spectrum.

Power spectrum

A Brownian motion, also called a Wiener process, is obtained as the integral of a white noise signal,  dW(t) ,

W(t) = \int _{0}^{t} dW(t)

meaning that Brownian motion is the integral of the white noise  dW(t) whose power spectral density is flat[1]

 S_0 = \left|\mathcal{F}\left[\frac{dW(t)}{dt}\right](\omega)\right|^2 = \text{const}

Note that here \mathcal{F} denotes the Fourier transform and S_0 is a constant. An important property of this transform is that the derivative of any distribution transforms as[2]

 \mathcal{F}\left[\frac{dW(t)}{dt}\right](\omega) = i \omega \mathcal{F}[W(t)](\omega)

from which we can conclude that the power spectrum of Brownian noise is

 S(\omega)= \left|\mathcal{F}[W(t)](\omega)\right|^2= \frac{S_0}{\omega^2} .

Production

Brown noise can be produced by integrating white noise.[3][4] That is, whereas (digital) white noise can be produced by randomly choosing each sample independently, Brown noise can be produced by adding a random offset to each sample to obtain the next one. Note that while the first sample is random across the entire range that the sound sample can take on, the remaining offsets from there on are a tenth or there abouts, leaving room for the signal to bounce around.

Sample

Brown noise
10 seconds of Brown noise

Problems playing this file? See media help.

References

  1. Gardiner, C. W. Handbook of stochastic methods. Berlin: Springer Verlag.
  2. Barnes, J.A. and Allan, D.W. (1966). "A statistical model of flicker noise". Proceedings of the IEEE 54 (2): 176– 178. doi:10.1109/proc.1966.4630. and references therein
  3. "Integral of White noise". 2005.
  4. Bourke, Paul (October 1998). "Generating noise with different power spectra laws".
This article is issued from Wikipedia - version of the Thursday, March 10, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.