Bullwhip effect

Illustration of the bullwhip effect: The final customer places an order (whip) and order fluctuations build up upstream the supply chain.

The bullwhip effect is a distribution channel phenomenon in which forecasts yield supply chain inefficiencies. It refers to increasing swings in inventory in response to shifts in customer demand as you move further up the supply chain. The concept first appeared in Jay Forrester's Industrial Dynamics (1961) and thus it is also known as the Forrester effect. The bullwhip effect was named for the way the amplitude of a whip increases down its length. The further from the originating signal, the greater the distortion of the wave pattern. In a similar manner, forecast accuracy decreases as move upstream along the supply chain. For example, many consumer goods have fairly consistent consumption at retail. But this signal becomes more chaotic and unpredictable as you move away from consumer purchasing behavior.

In the 1990s, Hau Lee, a Professor of Engineering and Management Science at Stanford University, helped incorporate the concept into supply chain vernacular using a story about Volvo. Suffering a glut in green cars, sales and marketing developed a program to move the excess inventory. While successful in generating the desired market pull, manufacturing didn't know about the promotional plans. Instead, they read the increase in sales as an indication of growing demand for green cars and ramped up production.[1]

Research indicates a fluctuation in point-of-sale demand of +/- five percent will be interpreted by supply chain participants as a change in demand of up to +/- forty percent. Much like cracking a whip, a small flick of the wrist (a shift in point of sale demand) can cause a large motion at the end of the whip (manufacturer’s response).

Causes

Bullwhip effect

Because customer demand is rarely perfectly stable, businesses must forecast demand to properly position inventory and other resources. Forecasts are based on statistics, and they are rarely perfectly accurate. Because forecast errors are given, companies often carry an inventory buffer called "safety stock".

Moving up the supply chain from end-consumer to raw materials supplier, each supply chain participant has greater observed variation in demand and thus greater need for safety stock. In periods of rising demand, down-stream participants increase orders. In periods of falling demand, orders fall or stop, thereby not reducing inventory. The effect is that variations are amplified as one moves upstream in the supply chain (further from the customer). This sequence of events is well simulated by the beer distribution game which was developed by MIT Sloan School of Management in the 1960s.

The causes can further be divided into behavioral and operational causes.

Behavioral causes

Human factors influencing the behavior in supply chains are largely unexplored. However, studies suggest that people with increased need for safety and security seem to perform worse than risk-takers in a simulated supply chain environment. People with high self-efficacy experience less trouble handling the bullwhip-effect in the supply chain.[2]

Operational causes

Consequences

In addition to greater safety stocks, the described effect can lead to either inefficient production or excessive inventory, as each producer needs to fulfill the demand of its customers in the supply chain. This also leads to a low utilization of the distribution channel.

In spite of having safety stocks there is still the hazard of stock-outs which result in poor customer service and lost sales. In addition to the (financially) hard measurable consequences of poor customer services and the damage to public image and loyalty, an organization has to cope with the ramifications of failed fulfillment which may include contractual penalties. Moreover, repeated hiring and dismissal of employees to manage the demand variability induces further costs due to training and possible lay-offs.

Countermeasures

In theory, the bullwhip effect does not occur if all orders exactly meet the demand of each period. This is consistent with findings of supply chain experts who have recognized that the bullwhip effect is a problem in forecast-driven supply chains, and careful management of the effect is an important goal for supply chain managers. Therefore it is necessary to extend the visibility of customer demand as far as possible.

One way to achieve this is to establish a demand-driven supply chain which reacts to actual customer orders. In manufacturing, this concept is called kanban. This model has been successfully implemented in Wal-Mart's distribution system. Individual Wal-Mart stores transmit point-of-sale (POS) data from the cash register back to corporate headquarters several times a day. This demand information is used to queue shipments from the Wal-Mart distribution center to the store and from the supplier to the Wal-Mart distribution center. The result is near-perfect visibility of customer demand and inventory movement throughout the supply chain. Better information leads to better inventory positioning and lower costs throughout the supply chain.

The concept of "cumulative quantities" is a method that can tackle and even avoid the bull-whip-effect. This method is developed and practised mainly in the German automotive industry, with its expanded supply chains[3] and is established in several EDI-formats between OEM's and their suppliers.

Barriers to the implementation of a demand-driven supply chain include the necessary investment in information technology and the creation of a corporate culture of flexibility and focus on customer demand. Another prerequisite is that all members of a supply chain recognize that they can gain more if they act as a whole which requires trustful collaboration and information sharing.

Methods intended to reduce uncertainty, variability, and lead time:

See also

References

  1. ↑ Managing a Supply Chain is Becoming a Bit Like Rocket Science (2002, Jan. 31), The Economist
  2. ↑ Brauner P., Runge S., Groten M., Schuh M., Ziefle M. (2013). Human Factors in Supply Chain Management. Lecture Notes in Computer Science Volume 8018, 2013, pp 423-432
  3. ↑ Herlyn W.: The Bullwhip Effect in expanded Supply Chains and the Concept of Cumulative Quantities , epubli Verlag, Berlin, 2014, S. 513-528, ISBN 978-3-8442-9878-9
  • Forrester, Jay Wright (1961). Industrial Dynamics. MIT Press. 
  • Mason-Jones, Rachel; Towill, Dennis R. (2000). "Coping with Uncertainty: Reducing "Bullwhip" Behaviour in Global Supply Chains". Supply Chain Forum (1): 40–44. 

Literature

This article is issued from Wikipedia - version of the Saturday, April 16, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.