Business continuity

Business continuity encompasses a loosely defined set of planning, preparatory and related activities which are intended to ensure that an organization's critical business functions will either continue to operate despite serious incidents or disasters that might otherwise have interrupted them, or will be recovered to an operational state within a reasonably short period. As such, business continuity includes three key elements and they are

  1. Resilience: critical business functions and the supporting infrastructure are designed and engineered in such a way that they are materially unaffected by most disruptions, for example through the use of redundancy and spare capacity;
  2. Recovery: arrangements are made to recover or restore critical and less critical business functions that fail for some reason.
  3. Contingency: the organization establishes a generalized capability and readiness to cope effectively with whatever major incidents and disasters occur, including those that were not, and perhaps could not have been, foreseen. Contingency preparations constitute a last-resort response if resilience and recovery arrangements should prove inadequate in practice.

If there is no Business Continuity plan implemented and the organization in question is facing a rather severe threat or disruption that may lead to bankruptcy, the implementation and outcome, if not too late, may strengthen the organization's survival and its continuity of business activities (Gittleman, 2013).

The management of business continuity falls largely within the sphere of risk management, with some cross-over into related fields such as governance, information security and compliance. Risk is a core consideration since business continuity is primarily concerned with those business functions, operations, supplies, systems, relationships etc. that are critically important to achieve the organization's operational objectives. Business Impact Analysis is the generally accepted risk management term for the process of determining the relative importance or criticality of those elements, and in turn drives the priorities, planning, preparations and other business continuity management activities.

The foundation of business continuity are the standards, program development, and supporting policies; guidelines, and procedures needed to ensure a firm to continue without stoppage, irrespective of the adverse circumstances or events. All system design, implementation, support, and maintenance must be based on this foundation in order to have any hope of achieving business continuity, disaster recovery, or in some cases, system support.

Standards

Several business continuity standards have been published by various standards bodies:

ISO - ISO 22301:2012, "Societal security – Business continuity management systems – Requirements", specifies a management system to manage an organization's business continuity arrangements. It is formal in style in order to facilitate compliance auditing and certification. It is supported by ISO 22313:2012, "Societal security – Business continuity management systems – Guidance" which provides more pragmatic advice concerning business continuity management. ISO/IEC 27031:2011, "Information security – Security techniques – Guidelines for information and communication technology [ICT] readiness for business continuity" offers guidance on the ICT aspects of business continuity management.

United Kingdom – British Standard BS 25999 was a two-part business continuity management standard. “BS 25999-1:2006 Business Continuity Management. Code of Practice” offered pragmatic implementation guidance, but was withdrawn in 2012 when ISO 22313 effectively superseded it. “BS 25999-2:2007 Specification for Business Continuity Management” formally specified a set of requirements for a business continuity management system. It too was withdrawn in 2012 when it was (in effect) replaced by ISO 22301.

North America – Published by the National Fire Protection Association NFPA 1600: Standard on Disaster/Emergency Management and Business Continuity Programs.

North America - ASIS/BSI BCM.01:2010 published Dec 2010

ANSI/ASIS SPC.1-2009 Organizational Resilience: The ANSI/ASIS SPC.1-2009 Organizational Resilience: Security, Preparedness, and Continuity Management Systems—Requirements with Guidance for Use American National Standard is under consideration for inclusion in the DHS PS-Prep, a voluntary program designed to enhance national resilience in an all hazards environment by improving private sector preparedness.

Australia – Published by Standards Australia HB 292-2006 : A practitioners guide to business continuity management HB 293-2006 : Executive guide to business continuity management In 2010, Standards Australia introduced their Standard AS/NZS 5050 that connects far more closely with traditional risk management practices. This interpretation is designed to be used in conjunction with AS/NZS 31000 covering risk management.

Program

Ongoing management-level process to ensure that necessary steps are regularly taken to identify probable accidents, disasters, emergencies, and/or threats. It also involves (1) assessment of the probable effect of such events, (2) development of recovery strategies and plans, and (3) maintenance of their readiness through personnel training and plan testing. See also business impact analysis

Policies

Policies are those things mandated by the management of an organization that will always be performed according to a preset design plan, and supporting all business functions within an organization.

BC/BCM plan

The components of the business continuity methodology required for manifestation into a documented plan include:

Set of documents, instructions, and procedures which enable a business to respond to accidents, disasters, emergencies, and/or threats without any stoppage or hindrance in its key operations. Also called business resumption plan, disaster recovery plan, or recovery plan.

Should also include: purpose, scope, objectives and assumptions that were used to develop the plan. Key accountabilities including authority to invoke, instructions subsequent to invocations, and a detailed communications plan must be included in the plan to ensure efficient resumption of operations.

BC/BCM planning

Task of identifying, developing, acquiring, documenting, and testing procedures and resources that will ensure continuity of a firm's key operations in the event of an accident, disaster, emergency, and/or threat. It involves (1) risk mitigation planning (reducing possibility of the occurrence of adverse events), and (2) business recovery planning (ensuring continued operation in the aftermath of a disaster).

Guidelines

Guidelines are those things which are recommended to be performed according to a preset design plan. However depending upon the needs and requirements of the target business function, these items may or may not be performed, or may be altered during implementation.

Procedures

British Standard 25999-2 and other standards identified above provide a specification for implementing a business continuity management system within an organization.

Business impact analysis (BIA)

The entire concept of business continuity is based on the identification of all business functions within an organization, and then assigning a level of importance to each business function. A business impact analysis is the primary tool for gathering this information and assigning criticality, recovery point objectives, and recovery time objectives, and is therefore part of the basic foundation of business continuity.

The BIA can be used to identify extent and timescale of the impact on different levels of an organization. For instance it can examine the effect of disruption on operational, functional and strategic activities of an organization. Not only the current activities but the effect of disruption on major business changes, introducing new product or services for example, can be determined by BIA.

Most standards require that a business impact analysis should be reviewed at defined intervals appropriate for each organization and whenever any of the following occur:

Security management

In today's global business environment, security must be the top priority in managing Information Technology. For most organizations, security is mandated by law Citation? The only security law is HIPAA, and conformance to those mandates is investigated regularly in the form of auditsCitation? The only mandate that's supposedly audited yearly is PCI-DSS and PCI-DSS is self reporting. There's no enforcement.. Failure to pass security audits can have financial and management changing impacts upon an organization.

Document management

In large information technology environments, personnel turnover is inevitable and must be planned as part of business continuity. The solution to the problems associated with turnover, is complete and up-to- date documentation. This ensures that new personnel will have the information they need to quickly become knowledgeable and productive with respect to the business functions they are tasked to support. This also implies that business function related documentation is largely generated (rather than written) from existing systems and managed in an automated manner.

Change management

Main article: change management

Regulations require that changes to business functions be documented and tracked for auditing purposes and is designated as "change control". This brings a level of stability to the business functions by requiring the support personnel to document and coordinate proposed changes to the underlying systems. As this process becomes more and more automated, the emphasis will be less upon personnel control, and more upon regulatory compliance.

Audit management

One of the most costly and time-consuming aspects of information technology management is dealing with auditors. One of the goals of business continuity is data center automation, which includes audit management. All modern business functions should be designed with the concept of automatically generating the requisite audit compliance information and documentation as part of conducting day-to-day business. This dramatically reduces the time and cost associated with manually producing this information.

Automation is often associated with the idea of centralized management - in area of data storage and data management. Solutions based on storage consolidation can ensure data safety, efficiency, high availability, reliability and convenience.[2]

Service level agreements (SLA)

The interface between management and information technology is the Service level agreement (SLA). This provides a written contract stipulating the expectations of management with regard to the availability of a necessary business function, and the deliverables that information technology provides in support of that business function.

Communications systems

Another component of business continuity is communications in times of duress. Members of the disaster recovery team must be able to communicate effectively among themselves as well as with managers, directors, customers, partners, and even with the media.[3] In order to avoid some of the potential problems associated with disrupted communication channels, the business continuity plan should include a lead manager who will be in charge of all communications in that area, the cooperation of executives and public relations people, and scheduled exercises to put the plan into practice.

Other components

Disaster recovery planning occurs as a subset of defining the business continuity procedures.

The following is a list of physical and logical entities within an information technology environment which require the application of a business continuity methodology. Applying the methodology should include the definition of things such as policies, guidelines, standards, procedures, etc., for each item in the list:

Planning

Planning, prevention, and preparation are a key part of any business continuity management system and have direct read across from civil contingencies planning. The activity begins with understanding the business to identify potential risks and threats to critical business activities both internally and from the external environment. It is also advisable to examine the resilience of suppliers.

See also

References

  1. ↑ BCI Good Practice Guidelines 2007
  2. ↑ Open-E, Solutions. "Centralized data storage management - the must-have solution" 19 September 2011.
  3. ↑ "Building Communications Into Business Continuity". Dell.com. Retrieved 2012-06-22.

External links

This article is issued from Wikipedia - version of the Sunday, April 24, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.