Controlled NOT gate

The classical analog of the CNOT gate is a reversible XOR gate.
How the CNOT gate can be used (with Hadamard gates) in a computation
Representation of the CNOT gate
Answer on output depending on input and CNOT function
The first qubit flips only if the second qubit is 1.

In computing science, the controlled NOT gate (also C-NOT or CNOT) is a quantum gate that is an essential component in the construction of a quantum computer. It can be used to entangle and disentangle EPR states. Any quantum circuit can be simulated to an arbitrary degree of accuracy using a combination of CNOT gates and single qubit rotations. The CNOT gate is the "quantization" of a classical gate.

Operation

The CNOT gate operates on a quantum register consisting of 2 qubits. The CNOT gate flips the second qubit (the target qubit) if and only if the first qubit (the control qubit) is |1\rangle.

Before After
Control Target Control Target
|0\rangle |0\rangle |0\rangle |0\rangle
|0\rangle |1\rangle |0\rangle |1\rangle
|1\rangle |0\rangle |1\rangle |1\rangle
|1\rangle |1\rangle |1\rangle |0\rangle

If one allows only \{|0\rangle,|1\rangle\} as input values for both qubits, the TARGET output of the CNOT gate corresponds to the result of a classical XOR gate. Fixing CONTROL as |1\rangle, the TARGET output of the CNOT gate yields the result of a classical NOT gate.

More generally, the inputs are allowed to be a linear superposition of \{|0\rangle,|1\rangle\}. The CNOT gate transforms the quantum state:

a|00\rangle + b|01\rangle + c|10\rangle + d|11\rangle

into:

a|00\rangle + b|01\rangle + c|11\rangle + d|10\rangle

The CNOT gate can be represented by the matrix (permutation matrix form):

 \operatorname{CNOT} =  \begin{bmatrix} 1 & 0 & 0 & 0 \\ 0 & 1 & 0 & 0 \\ 0 & 0 & 0 & 1 \\  0 & 0 & 1 & 0 \end{bmatrix}.

The first experimental realization of a CNOT gate was accomplished in 1995. Here, a single Beryllium ion in a trap was used. The two qubits were encoded into an optical state and into the vibrational state of the ion within the trap. At the time of the experiment, the reliability of the CNOT-operation was measured to be on the order of 90%.

In addition to a regular controlled NOT gate, one could construct a function-controlled NOT gate, which accepts an arbitrary number n+1 of qubits as input, where n+1 is greater than or equal to 2 (a quantum register). This gate flips the last qubit of the register if and only if a built-in function, with the first n qubits as input, returns a 1. The function-controlled NOT gate is an essential element of the Deutsch-Jozsa algorithm.

Behaviour of CNOT in the Hadamard basis

When viewed only in the computational basis \{|0\rangle,|1\rangle\}, the behaviour of the CNOT appears to be like the equivalent classical gate. However, the simplicity of labelling one qubit the control and the other the target does not reflect the complexity of what happens for most input values of both qubits.

CNOT gate in Hadamard Basis

Insight can be won by expressing the CNOT gate with respect to a Hadamard basis \{|+\rangle,|-\rangle\}. The Hadamard basis[lower-alpha 1] of a one-qubit register is given by

|+\rangle = \frac{1}{\sqrt{2}}(|0\rangle + |1\rangle),\qquad  |-\rangle = \frac{1}{\sqrt{2}}(|0\rangle - |1\rangle),

and the corresponding basis of a 2-qubit register is

|++\rangle = |+\rangle|+\rangle = \frac{1}{2}(|0\rangle + |1\rangle)(|0\rangle + |1\rangle) = \frac{1}{2}(|00\rangle + |01\rangle + |10\rangle + |11\rangle),

etc. Viewing CNOT in this basis, the state of the second qubit remains unchanged, and the state of the first qubit is flipped, according to the state of the second bit. (For details see below.) "Thus, in this basis the sense of which bit is the control bit and which the target bit has reversed. But we have not changed the transformation at all, only the way we are thinking about it."[1]

The "computational" basis \{|0\rangle,|1\rangle\} is the eigenbasis for the spin in the Z-direction, whereas the Hadamard basis \{|+\rangle,|-\rangle\} is the eigenbasis for spin in the X-direction. Switching X and Z and qubits 1 and 2, then, recovers the original transformation."[2] This expresses a fundamental symmetry of the CNOT gate.

The observation that both qubits are (equally) affected in a CNOT interaction is of importance when considering information flow in entangled quantum systems.[3]

Details of the computation

We now proceed to give the details of the computation. Working through each of the Hadamard basis states, the first qubit flips between |+\rangle and |-\rangle when the second qubit is |-\rangle:

Initial state in Hadamard basis Equivalent state in computational basis Apply operator State in computational basis after CNOT Equivalent state in Hadamard basis
|++\rangle \frac{1}{2}(|00\rangle + |01\rangle + |10\rangle + |11\rangle) CNOT \frac{1}{2}(|00\rangle + |01\rangle + |11\rangle + |10\rangle) |++\rangle
|+-\rangle \frac{1}{2}(|00\rangle - |01\rangle + |10\rangle - |11\rangle) CNOT \frac{1}{2}(|00\rangle - |01\rangle + |11\rangle - |10\rangle) |--\rangle
|-+\rangle \frac{1}{2}(|00\rangle + |01\rangle - |10\rangle - |11\rangle) CNOT \frac{1}{2}(|00\rangle + |01\rangle - |11\rangle - |10\rangle) |-+\rangle
|--\rangle \frac{1}{2}(|00\rangle - |01\rangle - |10\rangle + |11\rangle) CNOT \frac{1}{2}(|00\rangle - |01\rangle - |11\rangle + |10\rangle) |+-\rangle

A quantum circuit that performs a Hadamard transform followed by CNOT then another Hadamard transform can be described in terms of matrix operators:

(H1 ⊗ H1)−1 . CNOT . (H1 ⊗ H1)

The single-qubit Hadamard transform, H1, is the negative of its own inverse. The tensor product of two Hadamard transforms operating (independently) on two qubits is labelled H2. We can therefore write the matrices as:

H2 . CNOT . H2

When multiplied out, this yields a matrix that swaps the |01\rangle and |11\rangle terms over, while leaving the |00\rangle and |10\rangle terms alone. This is equivalent to a CNOT gate where qubit 2 is the control qubit and qubit 1 is the target qubit:

\begin{align}
  \frac{1}{4}
   &\begin{bmatrix}\begin{array}{rrrr}
    1 &  1 &  1 &  1\\
    1 & -1 &  1 & -1\\
    1 &  1 & -1 & -1\\
    1 & -1 & -1 &  1
   \end{array}\end{bmatrix}
.
\begin{bmatrix}\begin{array}{rrrr}
    1 & 0 & 0 & 0\\
    0 & 1 & 0 & 0\\
    0 & 0 & 0 & 1\\
    0 & 0 & 1 & 0
   \end{array}\end{bmatrix}
.
\begin{bmatrix}\begin{array}{rrrr}
    1 &  1 &  1 &  1\\
    1 & -1 &  1 & -1\\
    1 &  1 & -1 & -1\\
    1 & -1 & -1 &  1
   \end{array}\end{bmatrix}
=
\begin{bmatrix}\begin{array}{rrrr}
    1 & 0 & 0 & 0\\
    0 & 0 & 0 & 1\\
    0 & 0 & 1 & 0\\
    0 & 1 & 0 & 0
   \end{array}\end{bmatrix}

\end{align}

Constructing the Bell State |\Phi^+\rangle

A common application of the CNOT gate is to maximally entangle two qubits into the |\Phi^+\rangle Bell state; this forms part of the setup of the superdense coding, quantum teleportation, and entangled quantum cryptography algorithms.

To construct |\Phi^+\rangle, the inputs A (control) and B (target) to the CNOT gate are:

\frac{1}{\sqrt{2}}(|0\rangle + |1\rangle)_A and |0\rangle_B

After applying CNOT, the resulting Bell State \frac{1}{\sqrt{2}}(|00\rangle + |11\rangle) has the property that the individual qubits can be measured using any basis and will always present a 50/50 chance of resolving to each state. In effect, the individual qubits are in an undefined state. The correlation between the two qubits is the complete description of the state of the two qubits; if we choose the same basis to measure both qubits and compares notes, the measurements will perfectly correlate.

When viewed in the computational basis, it appears that qubit A is affecting qubit B. Changing our viewpoint to the Hadamard basis demonstrates that, in a symmetrical way, qubit B is affecting qubit A.

The input state can alternately be viewed as:

|+\rangle_A and \frac{1}{\sqrt{2}}(|+\rangle + |-\rangle)_B

In the Hadamard view, the control and target qubits have conceptually swapped and qubit A is inverted when qubit B is |-\rangle_B. The output state after applying the CNOT gate is \frac{1}{\sqrt{2}}(|++\rangle + |--\rangle) which can be shown[lower-alpha 2] to be exactly the same state as \frac{1}{\sqrt{2}}(|00\rangle + |11\rangle).

See also

Notes

  1. Note that |+\rangle can be constructed by applying a Hadamard gate to a qubit set to |0\rangle, and similarly for |-\rangle
  2. \frac{1}{\sqrt{2}}(|++\rangle + |--\rangle) = \frac{1}{\sqrt{2}}(|+\rangle_A|+\rangle_B + |-\rangle_A|-\rangle_B) = \frac{1}{2\sqrt{2}}((|0\rangle_A + |1\rangle_A)(|0\rangle_B + |1\rangle_B) + (|0\rangle_A - |1\rangle_A)(|0\rangle_B - |1\rangle_B)) = \frac{1}{2\sqrt{2}}((|00\rangle + |01\rangle + |10\rangle + |11\rangle) + (|00\rangle - |01\rangle - |10\rangle + |11\rangle)) = \frac{1}{\sqrt{2}}(|00\rangle + |11\rangle)

References

  1. Eleanor G. Rieffel; Wolfgang H. Polak (4 March 2011). Quantum Computing: A Gentle Introduction. MIT Press. p. 80. ISBN 978-0-262-01506-6.
  2. Gottesman, Daniel (1998). "The Heisenberg Representation of Quantum Computers". Group: Proceedings of the XXII International Colloquium on Group Theoretical Methods in Physics, eds. S. P. Corney, R. Delbourgo, and P. D. Jarvis, pp. (Cambridge, MA, International Press, ) 22 (1999): 32–43. arXiv:quant-ph/9807006. Bibcode:1998quant.ph..7006G. line feed character in |journal= at position 65 (help)
  3. Deutsch, David; Hayden, Patrick (1999). "Information Flow in Entangled Quantum Systems". Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences 456 (1999): 1759–1774. arXiv:quant-ph/9906007. Bibcode:2000RSPSA.456.1759H. doi:10.1098/rspa.2000.0585.
General

External links

This article is issued from Wikipedia - version of the Wednesday, October 14, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.