C-Stand
In film production, a C-stand is primarily used to position light modifiers, such as silks, nets, or flags, in front of light sources. The stand is constructed of metal and consists of a collapsible base, two riser columns, and a baby pin on top. In addition, a C-stand includes a gobo head and a gobo arm, which provide the ability to articulate a light modifier without moving the stand itself. The legs of C stands are designed to be nested, so many stands can be placed around a light source.
The term C-stand comes from the early history of lighting equipment where a popular sized sun reflector was 100 inches square or "century". Today the term C-stand is a popular name for the grip stand made by Matthews studio equipment and has been copied by other manufacturers.
A secondary use of C-stands is to position smaller light fixtures.[1] A typical use would be to offset a backlight from the stand column, so that the stand itself can be placed out of shot, while the backlight hovers somewhere above the top edge of frame.
Types
A C-stand is sometimes referred to as a "grip stand". While the grip department always carries C stands, sometimes the electric department may as well, for use well as lights that don't mount onto baby or junior stands, such as kinos.
A "baby C-stand" is only 20 inches at its shortest height. It is nicknamed a "Gary Coleman" or a "Billy Barty" stand in the US. In the UK a short flag stand with stubby legs is called a "shotgun" flag stand (a reference to the stand having been "sawn off").
A C-stand with a removable base is called a C-stand with a turtle base. The opening at the top of the turtle base accepts the base of c-stand upright as well as a junior pin.
A C-stand with an upper most leg which is moveable on the vertical axis is called a Stair Leg C-stand as the unit can be placed on a stairway.
References
- ↑ Box, Harry C. "Set lighting technician's handbook" Third Edition, Focal Press, 2003. p. 119.