C166 family

The C166 family[1] is a 16-bit microcontroller architecture from Infineon (formerly the semiconductor division of Siemens) in cooperation with STMicroelectronics. It was first released in 1993 and is a controller for measurement and control tasks. It uses the well-established RISC architecture, but features some microcontroller-specific extensions such as bit-addressable memory and an interrupt system optimized for low-latency. When this architecture was introduced the main focus was to replace 8051 controllers (from Intel).

Opcode[2] compatible successors of the C166 family are the C167 family, XC167 family, the XE2000 family and the XE166 family.

C167 / ST10 family

The Siemens/Infineon C167 family[3] or STMicroelectronics ST10 family [4] is a further development of the C166 family. It has improved addressing modes and support for "atomic" instructions. Variants include, for example, Controller Area Network (CAN bus).

References

  1. ↑ C166 Family
  2. ↑ C166 Instruction Set
  3. ↑ C167 family
  4. ↑ ST10 16-bit MCUs - STMicroelectronics

External links


This article is issued from Wikipedia - version of the Saturday, April 09, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.