Canadian Light Source

Canadian Light Source
Established 1999
Research type Synchrotron light source
Director Robert Lamb
Staff 200 (approx.)
Location Saskatoon, Saskatchewan
Operating agency
Canadian Light Source Inc.
Website www.lightsource.ca
The Canadian Light Source building from the air

The Canadian Light Source (CLS) (French: Centre canadien de rayonnement synchrotron – CCRS) is Canada's national synchrotron light source facility, located in Saskatoon, Saskatchewan, Canada.[1] The CLS has a third-generation 2.9 GeV storage ring, and the building occupies a footprint the size of a football field on the grounds of the University of Saskatchewan.[2] It opened in 2004 after a 30-year campaign by the Canadian scientific community to establish a synchrotron radiation facility in Canada.[3] It has expanded both its complement of beamlines and its building in two phases since opening, and its official visitors have included the Queen and Prince Philip. As a national synchrotron facility[4] with over 1000 individual users, it hosts scientists from all regions of Canada and around 20 other countries.[5] Research at the CLS has ranged from viruses[6] to superconductors[7] to dinosaurs,[8] and it has also been noted for its industrial science [9][10] and its high school education programs.[11]

History

The road to the CLS: 1972–1999

The monochromator from the first CSRF beamline, now a museum piece at the CLS
The SAL LINAC, seen at the CLS in 2011

Canadian interest in synchrotron radiation dates from 1972, when Bill McGowan of the University of Western Ontario (UWO) organised a workshop on its uses. At that time there were no users of synchrotron radiation in Canada. In 1973 McGowan submitted an unsuccessful proposal to the National Research Council (NRC) for a feasibility study on a possible synchrotron lightsource in Canada. In 1975 a proposal to build a dedicated synchrotron lightsource in Canada was submitted to NRC. This was also unsuccessful. In 1977 Mike Bancroft, also of UWO, submitted a proposal to NRC to build a Canadian beamline, as the Canadian Synchrotron Radiation Facility (CSRF), at the existing Synchrotron Radiation Center at the University of Wisconsin-Madison, USA, and in 1978 newly created NSERC awarded capital funding. CSRF, owned and operated by NRC, grew from the initial beamline to a total of three by 1998.

A further push towards a Canadian synchrotron light source started in 1990 with formation of the Canadian Institute for Synchrotron Radiation (CISR), initiated by Bruce Bigham of AECL. AECL and TRIUMF showed interest in designing the ring, but the Saskatchewan Accelerator Laboratory (SAL) at the University of Saskatchewan became prominent in the design. In 1991 CISR submitted a proposal to NSERC for a final design study. This was turned down, but in later years, under President Peter Morand, NSERC became more supportive. In 1994 NSERC committee recommended a Canadian synchrotron light source and a further NSERC committee was formed to select between two bids to host such a facility, from the Universities of Saskatchewan and Western Ontario. In 1996 this committee recommended that the Canadian Light Source be built in Saskatchewan.

With NSERC unable to supply the required funds it was not clear where funding would come from. In 1997 the Canada Foundation for Innovation (CFI) was created to fund large scientific projects, possibly to provide a mechanism to fund the CLS. In 1998 a University of Saskatchewan team led by Dennis Skopik, the SAL director, submitted a proposal to CFI.[3] The proposal was to fund 40% of the construction costs, with remaining money having to come from elsewhere. Assembling these required matching funds has been called "an unprecedented level of collaboration among governments, universities, and industry in Canada"[12] and Bancroft – leader of the rival UWO bid – anckowledged the "Herculean" efforts of the Saskatchewan team in obtaining funds from the University, the City of Saskatoon, Saskatchewan Power, NRC, the Provincial Government of Saskatchewan, and Western Economic Diversification.[3] At a late hour CFI told the proponents that it would not accept the SAL LINAC as part of the proposal, and the resulting shortfall was met in part by the spontaneous announcement by the Saskatoon city council and then Mayor Henry Dayday that they would double their contribution as long as other partners would. On 31 March 1999 the success of the CFI proposal was announced.

The following month Skopik took a position at Jefferson Lab in the USA. He decided not to stay on as director of the Saskatoon facility because his expertise was in subatomic particles, and, he argued, the head of the CLS should be a researcher who specializes in using such a facility. His successor was Mike Bancroft[12]

Construction: 1999–2004

The CLS building under construction in June 2000
CLS ring tunnel construction under way in 2001
Peter Mansbridge opens The National on top of the storage ring, 21 October 2004

At the start of the project, all staff members with the former SAL were transferred into a new not-for-profit corporation, Canadian Light Source Inc., CLSI, which had primary responsibility for the technical design, construction and operation of the facility. As a separate corporation from the University, CLSI had the legal and organizational freedom suitable for this responsibility. UMA, an experienced engineering firm, now part of AECOM, with extensive experience managing large technical and civil construction projects, was hired as project managers.[13]

The new building – attached to the existing SAL building, and measuring 84m by 83m in area with a maximum height of 23m – was completed in early 2001.[3] The footprint of the CLS has been described as equivalent to that of a football field.[2]

Bancroft's appointment ended in October 2001 and he returned to UWO, with Mark de Jong appointed acting director. Bancroft remained as acting Scientific Director until 2004.[14]

In 2002 the CLS Project was awarded the National Award for Exceptional Engineering Achievement by the Canadian Council of Professional Engineers.[15]

The SAL LINAC was refurbished and placed back into service in 2002 while the booster and storage rings were still under construction.[3] First turn was achieved in the booster ring in July 2002 with full booster commissioning completed by September 2002.[16]

New director Bill Thomlinson, an expert in synchrotron medical imaging, arrived in November 2002. He was recruited from the European Synchrotron Radiation Facility where he had been the head of the medical research group.[17]

The 1991 proposal to NSERC envisioned a 1.5 GeV storage ring, since at this time the interest of the user community was mainly in the soft X-ray range. The ring was a racetrack layout of four to six bend regions surrounding straights with extra quadrupoles to allow for variable functions in the straights. The design contemplated the use of superconducting bends in some locations to boost the photon energies produced. The drawback of this design was the limited number of straight sections. In 1994 a more conventional machine with 8 straight sections was proposed, again with 1.5 GeV energy. At this time more users of hard X-rays were interested and it was felt that both the energy and number of straight sections were too low. By the time funding was secured in 1999 the design had changed to 2.9 GeV, with longer straight sections to enable two insertion devices per straight, delivering beam to two independent beamlines.[18]

Construction of the storage ring was completed in August 2003 and commissioning began the following month. Although beam could be stored, in March 2004 a large obstruction was found across the center of the chamber. Commissioning proceeded quickly after this was removed, and by June 2004 currents of 100mA could be achieved .[19]

On 22 October 2004 the CLS officially opened, with an opening ceremony attended by federal and provincial dignitaries, including then-Federal Minister of Finance Ralph Goodale and then-Saskatchewan Premier Lorne Calvert, university presidents and leading scientists. October 2004 was declared "Synchrotron Month" by the city of Saskatoon and the Saskatchewan government.[20] Peter Mansbridge broadcast the CBC's nightly newscast The National from the top of the storage ring the day before the official opening.[21] In parliament local MP Lynne Yelich said "There were many challenges to overcome, but thanks to the vision, dedication and persistence of its supporters, the Canadian Light Source synchrotron is open for business in Saskatoon."[22]

Operation and expansion: 2005–2012

The CLS building in 2008, with the expansion for the BMIT beamline on the left
The expansion for the Brockhouse beamlines under construction in July 2012

The initial funding included seven beamlines, referred to as Phase I, which covered the full spectral range: two infrared beamlines, three soft X-ray beamlines and two hard X-ray beamlines.[3] Further beamlines were built in two further phases, II (7 beamlines) and III (5 beamlines), announced in 2004 and 2006 respectively. Most of these were funded through applications to CFI by individual universities including UWO, the University of British Columbia and Guelph University[23]

In March 2005 leading infrared researcher Tom Ellis joined the CLS from Acadia University as Director of Research. He had previously spent 16 years at the Université de Montréal.[24]

The first external user was hosted in 2005, and the first research papers with results from the CLS were published in March 2006 – one from the University of Saskatchewan on peptides and the other from the University of Western Ontario on materials for organic light-emitting diodes.[25] A committee was set up in 2006 to peer review proposals for beamtime, under the chairmanship of Adam Hitchcock of McMaster University. By 2007 more than 150 external users had used the CLS,[26] and all seven of the initial beamlines had achieved significant results.[1]

The CLS building was also expanded in two phases. A glass and steel expansion was completed in 2007 to house the phase II medical imaging beamline BMIT,[27] and construction on the expansion needed to house the phase III Brockhouse beamline started in July 2011[28] and is still ongoing as of July 2012.

Bill Thomlinson retired in 2008,[29] and in May of that year physics professor Josef Hormes of the University of Bonn, former director of the CAMD synchrotron at Louisiana State University was announced as the new director.[30]

Science fiction author Robert J. Sawyer was writer-in-residence for two months in 2009 in what he called a "once in a lifetime opportunity to hang out with working scientists"[31] While there he wrote most of the novel "Wonder",[32] which won the 2012 Prix Aurora Award for best novel."[33]

By the end of 2010 more than 1000 individual researchers had used the facility, and the number of publications had passed 500.[4] From 2009–2012 several key metrics doubled, including the number of users and the number of publications, with more than 190 papers published in 2011. More than 400 proposals were received for beam time in 2012, with approximately a 50% oversubscription rate averaged over the operational beamlines. By 2012 the user community spanned all regions of Canada and around 20 other countries.[5] That year a high school group from La Loche Saskatchewan became the first to use the purpose built educational beamline IDEAS.[34] Also in 2012 the CLS signed an agreement with the Advanced Photon Source synchrotron in the USA to allow Canadian researchers access to their facilities.[35]

Science

Students from Evan Hardy Collegiate presenting their data at a seminar at CLS
The REIXS beamline with CLS scientist Feizhou He

An international team led by University of Calgary professor Ken Ng solved the detailed structure of RNA polymerase using X-ray crystallography at the CLS. This enzyme replicates itself as the Norwalk virus spreads through the body, and has been linked to other superviruses such as hepatitis C, West Nile virus and the common cold. Its duplication is responsible for the onset of such viruses.[6]

CLS scientist Luca Quaroni and University of Saskatchewan professor Alan Casson used infrared microscopy to identify biomarkers inside individual cells from tissue associated with Barrett's esophagus. This disease can lead to an aggressive form of cancer known as esophageal adenocarcinoma.[36]

Researchers from Lakehead University and the University of Saskatchewan used the CLS to investigate the deaths of Royal Navy sailors buried in Antigua in the late 1700s. They used X-ray fluorescence to look for trace elements such as lead and strontium in bones from a recently excavated naval cemetery[37]

Scientists from Stanford University worked with CLS scientists to design a cleaner, faster battery. The new battery charges in less than two minutes, thanks to a newly developed carbon nanostructure. The team grew nanocrystals of iron and nickel on carbon. Traditional batteries lack this structure, mixing iron and nickel with conductors more or less randomly. The result was a strong chemical bond between the materials, which the team identified and studied at the synchrotron.[38]

A team led by the Politecnico di Milano, including scientists from the University of Waterloo and the University of British Columbia, found the first experimental evidence that a charge density wave instability competes with superconductivity in high-temperature superconductors. They used four synchrotrons including the REIXS beamline at CLS.[7]

Using the X-ray spectromicroscopy beamline, a research team led by scientists from the State University of New York, Buffalo produced images of graphene showing how folds and ripples act as speed bumps for electrons, affecting its conductivity. This has implications for the use of graphene in a variety of future products.[39]

A collaboration between the University of Regina and the Royal Saskatchewan Museum has been investigating dinosaur fossils at the CLS, including "Scotty," a Tyrannosaurus found in Saskatchewan in 1991, one of the most complete and largest T-rex skeletons ever found. They looked at the concentration of elements in bones to study the impact of the environment on such animals.[8]

Industrial Program and Economic Impact

Image of a cellphone taken at CLS

From inception, the CLS showed a "strong commitment to industrial users and private/public partnerships",[40] with then-director Bancroft reporting "more than 40 letters of support from industry indicating that [the CLS] is important for what they do".[41] This commitment has been criticised, notably by University of Saskatchewan professor Howard Woodhouse, since only two private companies provided capital funding, with the rest coming from public funds,[40] while up to 25% of beamline time at CLS is allocated to commercial use.[40][10] The CLS has an industrial group, within the larger experimental facilities division, with industrial liaison scientists who make synchrotron techniques available to a "non-traditional" user base who are not synchrotron experts. By 2007 more than 60 projects had been carried out,[10] although in a speech in the same year, then-CLS director Bill Thomlinson said that "one of the biggest challenges for the synchrotron...is to get private users through the door", with less than 10% of time actually used by industry.[42]

In 1999 then-Saskatoon mayor Dayday stated that "the CLS will add $122 million to Canada's GDP during construction and $12 million annually after that".[43] An economic impact study of the two financial years 2009/10 and 10/11 showed the CLS had added $45 million per year to the Canadian GDP, or about $3 for every $1 of operating funding.[44] The CLS has been cited as an example of the commercialization of university research endangering "other areas of scholarship and research that is perceived to be of little immediate utility for generating private monetary wealth".[45] The CLS itself has stated that "the primary means of accessing the CLS is through a system of peer review, which ensures that the proposed science is of the highest quality and permits access to the facility to any interested researcher, regardless of regional, national, academic, industrial or governmental affiliation."[23]

Official Visitors

Michaëlle Jean (C) at the Canadian Light Source, with CLS Director Josef Hormes (L) and University of Saskatchewan President Peter MacKinnon (R)

Then-Prime Minister Jean Chrétien visited the CLS in November 2000 during an election campaign stop in Saskatoon.[46] He gave a speech on the mezzanine level of the building following his tour of the facility, praising the project for helping to reverse the brain drain of scientists from Canada.[47] The Queen and Prince Philip visited the CLS in May 2005. The Queen toured the second floor balcony while the Prince explored the machinery below. The synchrotron was turned off for the visit to reduce the noise level.[48] In August 2010 then-Governor General Michaëlle Jean visited the CLS as part of a two-day tour of Saskatchewan.[49] In April 2012 the CLS was "visited" remotely by Governor General David Johnston. He was visiting the LNLS synchrotron in Brazil, during a live link-up, by video chat and remote control software, between the two facilities.[50]

Medical Isotope Project

With the NRU reactor at the Chalk River Laboratories due to close in 2016, there was a need to find alternative sources of the medical isotope technetium-99m, a mainstay of nuclear medicine. In 2011 the Canadian Light Source received $14 Million in funding to investigate the feasibility of using an electron LINAC to produce molybdenum-99, the parent isotope of technetium-99.[51] As part of this project a 35MeV LINAC has been installed in an unused underground experimental hall previously used for photonuclear experiments with the SAL LINAC. First irradiations are planned for late summer 2012, with the results to be evaluated by the Winnipeg Health Sciences Centre.[52]

Education program

High school students from La Loche at the Canadian Light Source

The CLS has an education program – "Students on the Beamlines" – funded by NSERC Promoscience. This outreach program for science allows high school students to fully experience the work of a scientist, in addition to having the chance to use the CLS beamlines.

"The program allows students the development of active research, a very rare phenomena in schools and provides direct access to the use of a particle accelerator, something even rarer!" said teacher Steve Desfosses form College Saint-Bernard, Drummondville, Quebec.[53]

Dene students from La Loche, Saskatchewan have taken part in this program twice, looking at effects of acid rain.[54] Student Jontae DesRoches commented "Elders have noticed that the landscape, where trees used to grow, there's none growing anymore. They're pretty concerned because wildlife is disappearing. Like, here there used to be rabbits and now there's none".[55] In May 2012 three student groups were at the CLS simultaneously, with the La Loche students as the first to use the IDEAS beamline.[34]

“The aim for the students," according to CLS education and outreach coordinator Tracy Walker, "is to get an authentic scientific inquiry that's different from the examples in textbooks that have been done thousands of times."[56] Students from six provinces as well as the Northwest Territories have been directly involved in experiments, some of which have yielded publishable-quality research.[5]

In 2012 the CLS was awarded the Canadian Nuclear Society's Education and Communication Award "in recognition of its commitment to community outreach, increasing public awareness of synchrotron science, and developing innovative and outstanding secondary educational programs such as Students on the Beamlines".[11]

Mezzanine at night

Technical description

Accelerators

The booster and storage rings inside the experimental hall
Chicaned undulators inside the storage ring

Injection system

The injection system consists of a 250 MeV LINAC, a low energy transfer line, a 2.9 GeV booster synchrotron and a high energy transfer line.[57] The LINAC was operated for over 30 years as part of the Saskatchewan Accelerator Lab[58] and operates at 2586 MHz. The 78m low energy transfer line takes the electrons from the below-ground LINAC to the ground level booster in the newer CLS building, via two vertical chicanes. The full energy 2.9 GeV booster, chosen to give high orbit stability in the storage ring, operates at 1 Hz, with an RF frequency of 500 Hz, unsynchronised with the LINAC. This results in significant beam loss at the extraction energy.[57]

Storage Ring

The storage ring cell structure has a fairly compact lattice with twelve straight sections available for injection, RF cavities and 9 sections available for insertion devices. Each cell has two bending magnets detuned to allow some dispersion in the straights – the so-called double-bend achromat structure – and thus reduce the overall beam size. As well as the two bend magnets each cell has three families of quadrupole magnets and two families of sextupole magnets. The ring circumference is 171m, with a straight section length of 5.2m.[59] The CLS is the smallest of the newer synchrotron facilities, with the price of a relatively high horizontal beam emittance of 18.2 nm-rad.[1] The CLS was the first light source to use a superconducting RF cavity in the storage ring from the beginning of operations.[26] The niobium cavity is based on the design used at the Cornell Electron Storage Ring which allows potentially beam-perturbing high order modes to propagate out of the cavity where they can be very effectively damped.[59] The CLS was also one of the first facilities to chicane two undulators in one straight section, to maximize the number of insertion device beamlines.[26]

All five of the phase I X-ray beamlines use insertion devices. Four use permanent magnet undulators designed and assembled at the CLS, including one in-vacuum undulator and one elliptically polarized undulator (EPU). The HXMA beamline uses a superconducting wiggler built by the Budker Institute of Nuclear Physics in Novosibirsk.[26] Phase II added two further devices including another Budker superconducting wiggler, for the BMIT beamline.[60] Phase III will add four more devices, filling 8 of the 9 available straight sections. Longer term development includes the replacement of two of the phase I undulators with elliptically polarizing devices.[61]

The ring operates at a fill current of 250mA with two injections per day.[4] Facility status is shown on a "Star Trek-esque" webpage, and using the CLSFC account on Twitter.[62]

Beamlines

Layout of beamlines at the Canadian Light Source synchrotron
ID Name Port assigned[63] Phase Source Energy range (keV unless stated) Usage
BioXAS Life science beamline for X-ray absorption spectroscopy 3 Wiggler
in-vacuum undulator[61]
Life- and environmental science research using X-ray absorption spectroscopy and imaging.[23]
BMIT-BM Biomedical Imaging and Therapy 05B1-1 2 Bending Magnet 8–40 Imaging small to medium-sized animals (up to sheep size)[64]
BMIT-ID Biomedical Imaging and Therapy 05ID-2 2 Wiggler 20–100 Higher energy and larger animal capabilities than possible on the BM line[23]
BXDS Brockhouse X-ray diffraction and scattering sector 3 Resonant- and non-resonant, small and wide angle X-ray scattering. X-ray diffraction.[23]
CMCF-ID Canadian Macromolecular crystallography Facility 08ID-1 1 in-vacuum undulator 6.5–18 Macromolecular crystallography beamline suitable for studying small crystals and crystals with large unit cells.[65]
CMCF-BM Canadian Macromolecular Crystallography Facility 08B1-1 2 Bending Magnet 4–18 High throughput macromolecular crystallography.[23]
Far IR High Resolution Far Infrared spectroscopy 02B1-1 1 Bending Magnet 10–1000 cm−1 Ultrahigh resolution infrared spectroscopy of gas-phase molecules[66]
HXMA Hard X-ray micro-Analysis 06ID-1 1 Wiggler 5–40 X-ray absorption fine structure, X-ray microprobe, X-ray diffraction[67]
IDEAS Educational beamline Purpose-built educational beamline[34]
Mid IR Mid IR Spectromicroscopy 01B1-1 1 Bending Magnet 560–6000 cm−1 Infrared spectromicroscopic imaging at diffraction-limited spatial resolution, and photoacoustic spectroscopy[68]
OSR Optical Synchrotron Radiation 02B1-2 1 Bending Magnet Accelerator beam diagnostic beamline operating in the visible range.[69]
QMSC Quantum Materials Spectroscopy Centre 3 Double EPU[61] Spin- and angle-resolved photoemission spectroscopy.[23]
REIXS Resonant Elastic and Inelastic X-ray Scattering 10ID-2 2 EPU 80–2000 eV Soft X-ray emission spectroscopy and resonant soft X-ray scattering.[23]
SGM High Resolution Spherical Grating Monochromator 11ID-1 1 undulator 240–2000 eV X-ray absorption spectroscopy, X-ray photoemission spectroscopy. Interchangeable endstations, allows use of non-UHV-compatible samples[70]
SM Soft X-ray Spectromicroscopy 10ID-1 1 EPU 100–2000 eV Scanning trannsmission X-ray microscopy, Photoemission electron microscopy.[71]
SXRMB Soft X-ray Microcharacterization Beamline 06B1-1 2 Bending Magnet 1.7–10 X-ray absorption fine structure, X-ray microprobe.[72]
SyLMAND Synchrotron Laboratory for Micro And Nano Devices 05B2-1 2 Bending Magnet 1–15 Deep X-ray lithography with large area format[73]
VESPERS Very Sensitive Elemental and Structural Probe Employing Radiation from a Synchrotron 07B2-1 2 Bending Magnet 6–30 Hard X-ray microprobe using X-ray diffraction and X-ray fluorescence. X-ray absorption spectroscopy.[74]
VLS-PGM Variable Line Spacing Plane Grating Monochromator 11ID-2 1 undulator 5.5–250 eV High resolution X-ray Absorption Spectroscopy[75]
XSR X-Ray Synchrotron Radiation 02B2 1 Bending Magnet Accelerator beam diagnostic beamline operating in the X-ray range.[76]

See also

Sources

References

  1. 1 2 3 Cutler, Jeffrey; Hallin, Emil; de Jong, Mark; Thomlinson, William; Ellis, Thomas (2007). "The Canadian Light Source: The newest synchrotron in the Americas". Nuclear Instruments and Methods in Physics Research A 582: 11–13. Bibcode:2007NIMPA.582...11C. doi:10.1016/j.nima.2007.08.086.
  2. 1 2 Bisby, Mark; Maitland, Peter (2005). "CIHR Research: Re-Inventing the Microscope: The Canadian Light Source (CLS)". Healthcare Quarterly 8 (2): 22–23. doi:10.12927/hcq..17051. PMID 15828560.
  3. 1 2 3 4 5 6 Bancroft, G. M. (2004). "The Canadian Light Source – History and scientific prospects". Canadian Journal of Chemistry 82 (6): 1028–1042. doi:10.1139/v04-027.
  4. 1 2 3 "Status of the CLS – new opportunities for Physics research in Canada". Physics in Canada 61: 21. January 2011.
  5. 1 2 3 Ellis, Thomas (2012). "Canadian Light Source Hitting its Stride". Synchrotron Radiation News 82 (3): 1028–1042. doi:10.1080/08940886.2012.683354.
  6. 1 2 "U of C researcher cracks Norwalk code". 20 March 2008. Retrieved 27 July 2012.
  7. 1 2 "Synchrotrons help bring superconductors out of the cold". 13 July 2012. Retrieved 28 July 2012.
  8. 1 2 "Professor uses new technology to shed light on dinosaur bones". 28 December 2011. Retrieved 27 July 2012.
  9. Woodhouse, p. 142.
  10. 1 2 3 Cutler, J.; Christensen, C.; Kotzer, T.G.; Ogunremi, T; Pushparajah, T.; Warner, J. (2007). "The Canadian Light Source – A new tool for industrial research". Nuclear Instruments and Methods in Physics Research B 261: 859–862. Bibcode:2007NIMPB.261..859C. doi:10.1016/j.nimb.2007.04.051.
  11. 1 2 "Synchrotron recognized for educational excellence". 11 June 2012. Retrieved 21 July 2012.
  12. 1 2 "Synchrotron: Canadian Light Source 70 years in the making'",The Star-Phoenix 20 October 2004
  13. "Industrial involvement in the construction of synchrotron lightsources" (PDF). 2004. Retrieved 28 July 2012.
  14. CLS Newsletter October 2001
  15. "U of S-Owned Synchrotron Project Wins National Engineering Award". 27 May 2002. Retrieved 22 July 2012.
  16. "Commissioning report of the CLS booster synchrotron" (PDF). 2004. Retrieved 22 July 2012.
  17. "Thomlinson to head CLS Nov. 1". 9 August 2002. Retrieved 28 July 2012.
  18. "The Canadian Light Source" (PDF). 2003. Retrieved 25 July 2012.
  19. "Canadian Light Source status and commissioning results" (PDF). 2004. Retrieved 22 July 2012.
  20. "October declared Synchrotron Month". 24 September 2004. Retrieved 26 July 2012.
  21. "Dignitaries gather to mark synchrotron's grand opening". 5 November 2004. Retrieved 8 May 2012.
  22. "Lynne Yelich on Canadian Light Source". 21 October 2004. Retrieved 26 July 2012.
  23. 1 2 3 4 5 6 7 8 "Progress at Canada's national synchrotron facility: the Canadian Light Source" (PDF). 2007. Retrieved 23 July 2012.
  24. "Leading Scientist Recruited as Research Director for Canadian Light Source at the U of S". 1 March 2005. Retrieved 28 July 2012.
  25. "Research results begin to flow from synchrotron". 18 April 2006. Retrieved 27 July 2012.
  26. 1 2 3 4 Hallin, Emil; de Jong, Mark; Ellis, Thomas; Thomlinson, William; Dalzell, Matthew (2012). "Canadian Light Source Facility Update". Synchrotron Radiation News 19 (6): 7–12. doi:10.1080/08940880601064950.
  27. "Canada's medical imaging "crown jewel" takes shape". 1 December 2007. Retrieved 27 July 2012.
  28. "CLS Newsletter". 27 July 2011. Retrieved 27 July 2012.
  29. CLS Newsletter June 2007
  30. "Canadian Light Source names new executive director". 20 May 2008. Retrieved 27 July 2012.
  31. "Famed sci-fi author to be writer-in-residence at synchrotron". CBC News. 8 January 2009. Retrieved 27 July 2012.
  32. Sawyer, Robert J. (2011). Wonder. Toronto: Penguin Group (Canada). Acknowledgements. ISBN 978-0-670-06743-5.
  33. "Prix Aurora Awards". Retrieved 2012-12-0708. Check date values in: |access-date= (help)
  34. 1 2 3 "Synchrotron hub of high school student research" (PDF). 28 May 2012. Retrieved 22 July 2012.
  35. "Advanced Photon Source, Canadian Light Source Strengthen Ties, Expand X-ray Technology and Research". 18 June 2012. Retrieved 26 July 2012.
  36. "Researchers Shed Light on Esophageal Disease". 8 June 2009. Retrieved 27 July 2012.
  37. "Synchrotron reveals tales told by old bones". 30 April 2012. Retrieved 28 July 2012.
  38. "A cleaner, faster battery". 9 July 2012. Retrieved 28 July 2012.
  39. "Canadian Light Source spots speed bumps in graphene's electron highway". 15 August 2011. Retrieved 27 July 2012.
  40. 1 2 3 Woodhouse, p. 166.
  41. Woodhouse, p. 167.
  42. Woodhouse, p. 170.
  43. Woodhouse, p. 163.
  44. "Canadian Light Source making positive economic, scientific impacts for Canaada". 22 November 2011. Retrieved 24 July 2012.
  45. Woodhouse, p. 8.
  46. "Prime Minister makes election stop at Synchrotron". 24 November 2000. Retrieved 27 July 2012.
  47. "Prime Minister Chretien Visits CLS in Saskatoon". 26 June 2012. Retrieved 28 July 2012.
  48. "Royal visit diary". 19 May 2005. Archived from the original on 1 June 2012. Retrieved 15 July 2012.
  49. "Michaëlle Jean wraps up Sask. visit". CBC News. 24 August 2010. Retrieved 15 July 2012.
  50. "Saskatoon synchrotron operated via Brazil". 29 April 2012. Retrieved 15 July 2012.
  51. "Sask. Synchrotron to make medical isotopes". CBC News. 24 November 2011. Retrieved 15 July 2012.
  52. "Producing medical isotopes using X-rays" (PDF). 2012. Retrieved 27 July 2012.
  53. "Le synchrotron de Saskatoon mis à la portée de jeunes scientifiques du Collège Saint-Bernard",L'Express 3 March 2012
  54. "Northern Exposure: Students from Saskatchewan’s North do synchrotron science". October 2011. Retrieved 23 July 2012.
  55. "Experiment teaches students hands-on chemistry curriculum". 2011. Retrieved 23 July 2012.
  56. "Particle accelerating ... in high school". 10 March 2010. Retrieved 28 July 2012.
  57. 1 2 "Injection system for the Canadian Light Source" (PDF). 2004. Retrieved 7 July 2012.
  58. "The Canadian Light Source: an update" (PDF). 2001. Retrieved 7 July 2012.
  59. 1 2 "The Canadian Light Source: an update" (PDF). 2001. Retrieved 28 July 2012.
  60. "Insertion devices". Retrieved 28 July 2012.
  61. 1 2 3 "Insertion Device Development at the Canadian Light Source" (PDF). 2010. Retrieved 28 July 2012.
  62. "Three useful Twitter case studies". 5 February 2011. Retrieved 15 July 2012.
  63. "Beamlines". Retrieved 23 July 2012.
  64. Wysokinski, Tomasz W.; Chapman, Dean; Adams, Gregg; Renier, Michel; Suortti, Pekka; Thomlinson, William (2007). "Beamlines of the biomedical imaging and therapy facility at the Canadian light source—Part 1". Nuclear Instruments and Methods in Physics Research A 582: 73–76. Bibcode:2007NIMPA.582...73W. doi:10.1016/j.nima.2007.08.087.
  65. Grochulski, P.; Fodje, M. N.; Gorin, J.; Labiuk, S. L.; Berg, R. (2011). "Beamline 08ID-1, the prime beamline of the Canadian Macromolecular Crystallography Facility". Journal of Synchrotron Radiation 18 (4): 681–684. doi:10.1107/S0909049511019431.
  66. May, Tim; Appadoo, Dominique; Ellis, Thomas; Reininger, Ruben (2006). "Infrared Beamlines at the Canadian Light Source". AIP Conference Proceedings 882: 579–582. doi:10.1063/1.2436127.
  67. Jiang, D. T.; Chen, N.; Zhang, L.; Malgorzata, K.; Wright, G.; Igarashi, R.; Beuregard, D.; Kirkham, M.; McKibben, M. (2006). "XAFS at the Canadian Light Source". AIP Conference Proceedings 882: 893–895. doi:10.1063/1.2644695.
  68. May, Tim; Ellis, Thomas; Reininger, Ruben (2007). "Mid-infrared spectromicroscopy beamline at the Canadian Light Source". Nuclear Instruments and Methods in Physics Research A 582: 111–113. Bibcode:2007NIMPA.582..111M. doi:10.1016/j.nima.2007.08.074.
  69. Bergstrom, John C.; Vogt, Johannes M. (2006). "The optical diagnostic beamline at the Canadian Light Source". Nuclear Instruments and Methods in Physics Research A 562: 495–512. Bibcode:2006NIMPA.562..495B. doi:10.1016/j.nima.2006.02.200.
  70. Regier, T; Krochak, J; Sham, T. K.; Hu, Y. F.; Thompson, J.; Blyth, R. I. R. (2007). "Performance and capabilities of the CanadianDragon: The SGM beamline at the Canadian Light Source". Nuclear Instruments and Methods in Physics Research A 582: 93–95. Bibcode:2007NIMPA.582...93R. doi:10.1016/j.nima.2007.08.071.
  71. Kaznatcheev, K. V.; Karunakaran, Ch.; Lanke, U. D.; Urquhart, S. G.; Obst, M.; Hitchcock, A. P. (2007). "Soft X-ray spectromicroscopy beamline at the CLS: Commissioning results". Nuclear Instruments and Methods in Physics Research A 582: 96–99. Bibcode:2007NIMPA.582...96K. doi:10.1016/j.nima.2007.08.083.
  72. Hu, Y. F.; Coulthard, I.; Chevrier, D.; Wright, Glen; Igarashi, R.; Sitnikov, A.; Yates, B. W.; Hallin, E.; Sham, T. K.; Reininger, R.; Garrett, R.; Gentle, I.; Nugent, K.; Wilkins, S. (2009). "Preliminary Commissioning and Performance of the Soft X‐ray Micro‐characterization Beamline at the Canadian Light Source". AIP Conference Proceedings. AIP Conference Proceedings 1234: 343–346. doi:10.1063/1.3463208.
  73. Achenbach, Sven; Subramanian, Venkat; Klymyshyn, David; Wells, Garth (2010). "Synchrotron laboratory for micro and nano devices: facility concept and design". Microsystem Technologies 16 (8–9): 1293–1298. doi:10.1007/s00542-010-1071-3.
  74. Feng, Renfei; Dolton, Wade; Igarashi, Ru; Wright, Glen; Bradford, Morgan; McIntyre, Stewart; Garrett, R.; Gentle, I.; Nugent, K.; Wilkins, S. (2009). "Commissioning of the VESPERS Beamline at the Canadian Light Source". AIP Conference Proceedings. AIP Conference Proceedings 1234: 315–318. doi:10.1063/1.3463199.
  75. Hu, Y. F.; Zuin, L.; Wright, G.; Igarashi, R.; McKibben, M.; Wilson, T.; Chen, S. Y.; Johnson, T.; Maxwell, D.; Yates, B. W.; Sham, T. K.; Reininger, R. (207). "Commissioning and performance of the variable line spacing plane grating monochromator beamline at the Canadian Light Source". Review of Scientific Instruments 78 (8): 083109. Bibcode:2007RScI...78h3109H. doi:10.1063/1.2778613. PMID 17764315.
  76. Bergstrom, John C.; Vogt, Johannes M. (2008). "The X-ray diagnostic beamline at the Canadian Light Source". Nuclear Instruments and Methods in Physics Research A 587 (2–3): 441–457. Bibcode:2008NIMPA.587..441B. doi:10.1016/j.nima.2008.01.080.

External links

Wikimedia Commons has media related to Canadian Light Source.

Coordinates: 52°08′12.5″N 106°37′52.5″W / 52.136806°N 106.631250°W / 52.136806; -106.631250

This article is issued from Wikipedia - version of the Sunday, May 01, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.