Carl Folsom Airport

Carl Folsom Airport

NAIP aerial image, 30 June 2006
IATA: noneICAO: noneFAA LID: 14J
Summary
Airport type Public
Owner Elba Airport Authority
Serves Elba, Alabama
Elevation AMSL 258 ft / 79 m
Coordinates 31°24′36″N 086°05′25″W / 31.41000°N 86.09028°W / 31.41000; -86.09028
Runways
Direction Length Surface
ft m
1/19 3,050 930 Asphalt
Statistics (2010)
Aircraft operations 5,360
Based aircraft 18

Carl Folsom Airport (FAA LID: 14J) is a public-use airport located two nautical miles (4 km) west of the central business district of Elba, a city in Coffee County, Alabama, United States. It is owned by the Elba Airport Authority.[1]

This airport is included in the FAA's National Plan of Integrated Airport Systems for 2011–2015[2] and 2009–2013,[3] both of which categorized it as a general aviation facility.

Facilities and aircraft

Carl Folsom Airport covers an area of 171 acres (69 ha) at an elevation of 258 feet (79 m) above mean sea level. It has one runway designated 1/19 with an asphalt surface measuring 3,050 by 75 feet (930 x 23 m).[1]

For the 12-month period ending December 9, 2010, the airport had 5,360 aircraft operations, an average of 14 per day: 95% general aviation and 5% military. At that time there were 18 aircraft based at this airport: 78% single-engine, 11% multi-engine, 6% jet and 6% helicopter.[1]

See also

References

  1. 1 2 3 4 FAA Airport Master Record for 14J (Form 5010 PDF). Federal Aviation Administration. Effective 25 August 2011.
  2. "2011–2015 NPIAS Report, Appendix A (PDF, 2.03 MB)" (PDF). 2011–2015 National Plan of Integrated Airport Systems. Federal Aviation Administration. 4 October 2010.
  3. "2009–2013 NPIAS Report, Appendix A: Part 1 (PDF, 1.33 MB)" (PDF). 2009–2013 National Plan of Integrated Airport Systems. Federal Aviation Administration. 15 October 2008.

External links

This article is issued from Wikipedia - version of the Thursday, December 03, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.