Castellated nut

Castellated nut
A car hub, with the central nut hidden behind a castellated nut cover that is locked against rotation using a cotter pin. The effect is similar to using a castellated nut.

A castellated nut, also called a castle nut or slotted nut, is a nut with slots (notches) cut into one end.[1] The name comes from the nut’s resemblance to the crenellated parapet of a medieval castle.

The bolt or axle has one or two holes drilled through its threaded end. The nut is torqued properly and then, if the slot is not aligned with the hole in the fastener, the nut is rotated forward to the nearest slot. The nut is then secured with a split pin, R-clip or safety wire. It is a positive locking device.[1]

Castellated nuts are used in low-torque applications, such as holding a wheel bearing in place.[1]

References

Wikimedia Commons has media related to Castellated nuts.
  1. 1 2 3 Barrett, Rich, Fastener Design Manual (PDF).
This article is issued from Wikipedia - version of the Thursday, August 13, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.