Bethpage State Parkway

Bethpage State Parkway marker

Bethpage State Parkway
Philip B. Healey Memorial Parkway

Map of Nassau and Suffolk counties with the Bethpage State Parkway highlighted in red
Route information
Maintained by NYSDOT
Length: 2.49 mi[1] (4.01 km)
Existed: November 14, 1936[2] – present
Restrictions: No commercial vehicles
Major junctions
South end: Southern Parkway in North Massapequa
  NY 24 in Farmingdale
North end: Plainview Road in Bethpage
Location
Counties: Nassau
Highway system

The Bethpage State Parkway is a 2.49-mile (4.01 km) parkway in Nassau County on Long Island, New York, in the United States. It begins at a trumpet interchange with the Southern State Parkway in the village of North Massapequa and serves Boundary Avenue, NY 24, and Central Avenue before terminating at a traffic circle with Plainview Road and a local park road in Bethpage State Park. The parkway is designated as New York State Route 907E (NY 907E), an unsigned reference route. It is also ceremoniously designated as the Philip B. Healey Memorial Parkway for Assemblyman Philip B. Healey (1921–1996).

The Bethpage State Parkway was first proposed by Robert Moses and the Long Island State Park Commission in 1924 to help get people from New York City to parks in Nassau and Suffolk counties. Construction of the parkway began in 1934, and the highway opened on November 14, 1936, along with the Laurelton Parkway (part of the Belt Parkway system) in Queens. The new parkway cost $1.04 million (1936 USD) to construct. Moses proposed extending the Bethpage in both directions, south to Merrick Road via Massapequa State Park and north to Caumsett State Park, via an extended Bethpage and the new Caumsett State Parkway, respectively. Both proposals were not constructed; however, bike paths leading away from both directions of the parkway have been constructed or are under construction. Several scaled-back proposals to extend the Bethpage north have been proposed, including an extension to NY 25A in Cold Spring Harbor and another to NY 135 (the Seaford–Oyster Bay Expressway) in Bethpage.

A bike path was constructed along the Bethpage State Parkway in the 1970s using the alignment once reserved for the southern extension and land along the east side of the current parkway. Work is underway on the Bethpage Bikeway, an extension of the original bike path to the Long Island Rail Road station in Syosset. The extension also uses part of the former Long Island Motor Parkway.

Route description

The Bethpage State Parkway northbound approaching the Long Island Rail Road tracks and exit B4 in Bethpage

The Bethpage State Parkway begins at Southern State Parkway exit 31, a trumpet interchange located within the Massapequa Preserve in the hamlet of North Massapequa. On the southbound Bethpage Parkway, the junction is signed as exit B1. From the Southern State Parkway, the Bethpage proceeds northward through North Massapequa and the town of Oyster Bay as a two-lane highway, traversing the northwesternmost part of the Massapequa Preserve. The forests of the preserve serve as a buffer between the highway and the dense neighborhoods of North Massapequa, and this setup follows the parkway to exit B2, a northbound-only exit for Boundary Avenue. Heading northbound, the 500-foot (150 m) stretch prior to the exit gore is two lanes wide.[3]

After passing under Boundary Avenue, the Bethpage Parkway bends to the northwest, leaving the Massapequa Preserve but continuing to run across a wooded strip of land in an otherwise heavily developed area. The highway passes through South Farmingdale on its way into the Farmingdale section of Oyster Bay, where it briefly widens to four lanes and begins to curve northward ahead of exit B3, a partial cloverleaf interchange with NY 24 (Hempstead Turnpike). The southbound cloverleaf ramps connect directly to NY 24, while the northbound ramps use a short section of Beach Street to reach the state route. Continuing northward, the Bethpage State Parkway passes under the Main Line of the Long Island Rail Road tracks and enters Bethpage, where the highway meets Central Avenue at exit B4 just north of the tracks.[3]

While Central Avenue heads west to Bethpage's commercial center, the parkway bends northeastward into Bethpage State Park and connects to Plainview Road and a local park road by way of unsigned exit B5, a traffic circle. The Bethpage State Parkway ends here while Plainview Road connects to the nearby Seaford–Oyster Bay Expressway (NY 135) and the Bethpage State Golf Course. The entire parkway corridor is served by a bike path that runs along the east side of the Bethpage Parkway, and the path continues northwest from exit B5 along the east side of Plainview Road.[3] The Bethpage Parkway is ceremoniously designated as the Philip B. Healey Memorial Parkway for Philip B. Healey, a State Assemblyman from Massapequa who died in May 1996. Healey had served the Massapequa area in the Assembly since 1971.[4]

History

Design and construction

The Bethpage State Parkway southbound approaching exit B1, the Southern State Parkway in North Massapequa

The Bethpage State Parkway was developed as part of a plan proposed by Robert Moses in 1924 that would help people travel in private automobiles from New York City to state parks proposed by the Long Island State Park Commission (LISPC). Moses, president of the LISPC, saw this as a personal mission, having owned a residence in Babylon. While the LISPC was formed to get more state parks, Moses was more focused on building roadways to get to them. Development throughout Nassau County had become common: with a 441% increase in population from 1900 to 1930, it was becoming more urgent to secure open land for parks. The agency was given the right to condemn land for these parks, which led to conflict with locals and other agencies who felt it isolated them from getting money in the development craze.[5] Bethpage State Park was created from land originally owned by Benjamin Yoakum, a railroad executive. In 1923, Yoakum opened a golf course on the land with 18 holes and a country club. Eight years later, in 1931, the LISPC leased the property from Yoakum. It was made into public land a year later, at which point the property was renamed the Bethpage Golf Club.[5] On May 24, 1934, the land which had become Bethpage State Park was sold to the LISPC.[6]

In similarity to parkways designed to access Jones Beach State Park, Moses designed the Bethpage State Parkway as a road that would have a rustic environment. This would include the use of wooden light posts instead of steel, wooden guide rails, and concrete overpasses designed with a stone face. Along with these designs, Moses also confirmed that the parkways would remain free of commercial vehicles and truck traffic. The parkway was designed with a line of woodlands alongside both 22-foot (6.7 m) lanes. Construction began on the parkway in 1934[5] even though a date of completion for the rest of the Long Island parkway system—which the Bethpage was intended to connect to—had yet to be established.[6] On November 14, 1936, the recreational parkway was opened to traffic along with the Laurelton Parkway in Queens.[2] Automobiles lined up at the Southern State Parkway in North Massapequa to travel the new parkway, which cost a total of $1.05 million (1936 USD). The ceremonial ribbon was cut at noon, after which Moses spoke praise to the federal government for its assistance and discussed how Bethpage State Park was previously inaccessible. The event was followed by a luncheon at the park.[7]

Extensions

During the opening, Moses was already proposing plans to extend the Bethpage southward to NY 27 and Merrick Road in Massapequa. The right-of-way for this new parkway was to cross Massapequa State Park, and as a result, Moses saw no trouble in acquiring the right-of-way. Moses proposed building interchanges at Merrick Road, which would have been a trumpet interchange, and NY 27, which would have been a full cloverleaf. The interchange with the Southern State Parkway would have been upgraded to a full cloverleaf. The design of the extension would be different than that of the original Bethpage Parkway, however, as the designs were refined in the 1950s to make the current parkway and extension a four-lane divided highway instead of the two-lane undivided design used in the 1930s.[8]

The Bethpage Parkway's northern terminus at the traffic circle in Bethpage

In the 1970s, a new bike path was constructed alongside the entire length of the Bethpage State Parkway. The path also continued south to Merrick Road by way of the right-of-way formerly proposed for the Bethpage Parkway's southern extension.[9]

On May 20, 1961, a new parkway was proposed by the LISPC to connect the Northern State Parkway to the proposed Caumsett State Park, the site of a wildlife refuge and arboretum. The parkway would be constructed as a northern extension of the Bethpage State Parkway, using filled land to traverse Cold Spring Harbor. It also required the condemning of a Standard Oil Company tank farm to avoid demolishing high-priced homes, which were to be taken via the three alternate routes proposed.[10] In 1965, the LISPC proposed that the four-lane parkway wind through Cold Spring Harbor and enter the village of Lloyd Harbor. Three years later, however, the LISPC said all they proposed was a scenic and landscaped two-lane road in the future. Conservationists of the Caumsett estate worried that the plans were too vague; furthermore, they believed that Caumsett should not be turned into a major-use facility like that of Jones Beach State Park on the southern shore.[11]

Exit 38 on the Northern State Parkway in Plainview, west of where the Bethpage and Caumsett state parkways were to meet

Extending the Bethpage northward was a requirement for building the new parkway, and four new interchanges were proposed for the Bethpage Parkway. The first, exit B5, would be at NY 135 (the Seaford–Oyster Bay Expressway). With this new interchange, the traffic circle with Plainview Road in Bethpage State Park would be eliminated. Other junctions included a diamond interchange for Plainview Avenue and Bethpage State Park, a full cloverleaf interchange with Old Country Road, and a partial cloverleaf interchange with the Long Island Expressway (then-NY 495). North of there, the new Caumsett exits would be a full cloverleaf interchange with the Northern State Parkway, a diamond interchange with NY 25 (Jericho Turnpike) and an interchange with NY 25A and NY 108.[12] After the NY 25A interchange, the parkway would continue north into Caumsett State Park and end at a traffic circle at the southern end of the park.[13]

In 1990, the Long Island Regional Planning Board proposed a new parkway extension to NY 25A in Cold Spring Harbor as part of a 20-year highway improvement program. However, funding sources were not specified.[14] As part of the Long Island Transportation Plan 2000, the New York State Department of Transportation proposed that the Bethpage be extended northwest to NY 135 in Bethpage.[15] In 1987, however, the Long Island Greenbelt Trail Conference proposed that the right-of-way for the Caumsett become part of a new Greenbelt trail.[16] In September 2002, Governor George Pataki announced the opening of Trail View State Park, a new, linear 400-acre (160 ha) state park using the former Bethpage and Caumsett right-of-way. The park also included a 7.4-mile (11.9 km) trail.[17]

The New York State Department of Transportation is currently constructing the Bethpage Bikeway, a multi-use trail extending 5.8 miles (9.3 km) northward from Bethpage State Park to the Syosset station on the Long Island Rail Road. Part of the path will use a former alignment of the Long Island Motor Parkway.[18] The proposed bike trail will cost $6.49 million (2012 USD) and was expected to be completed on July 3, 2012. The contract is slated to expire on December 30, 2012.[19]

Exit list

The entire route is in Nassau County.

Locationmi[1]kmExitDestinationsNotes
North Massapequa0.000.00B1 Southern Parkway East Islip, New YorkExit 31 on Southern Parkway
South Farmingdale0.911.46B2Boundary AvenueNorthbound exit only
Farmingdale1.802.90B3 NY 24 (Hempstead Turnpike) Levittown, Farmingdale
Bethpage2.383.83B4Central Avenue Farmingdale, Bethpage
Bethpage State Park2.494.01 Plainview Road to I-495 / NY 135 Bethpage State ParkTraffic circle
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

Caumsett State Parkway extension

If ever built, the Bethpage State Parkway extension to the Caumsett State Parkway would have the following interchanges, beginning at the northern terminus of the Bethpage Parkway. The entire route would have been in Nassau County.

LocationmikmExitDestinationsNotes
Bethpage Bethpage Parkway southBethpage Parkway continues south
B5 NY 135 (Seaford–Oyster Bay Expressway)Same-directional scissor ramps
B6Plainview Road / Broadway Bethpage State Park
PlainviewB7Old Country Road (CR 25)
B8 I-495 (Long Island Expressway)Proposed exit 47 on I-495
West HillsC1 Northern ParkwayProposed exit 38 on Northern Parkway;
road name changes from Bethpage to Caumsett
C2 NY 25 (Jericho Turnpike)
Cold Spring HarborC3 NY 25A (Main Street) / NY 108 (Harbor Road)
Lloyd HarborCaumsett State ParkProposed northern terminus
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

See also

References

  1. 1 2 "2007 Traffic Data Report for New York State" (PDF). New York State Department of Transportation. July 25, 2008. Retrieved July 15, 2009.
  2. 1 2 "2 New Parkways Go Into Use Today; Long Island Links to Connect City Directly with Nassau and Bethpage Park". The New York Times. November 14, 1936. p. 21. Retrieved April 24, 2010.
  3. 1 2 3 Microsoft; Nokia (May 9, 2012). "overview map of Bethpage State Parkway" (Map). Bing Maps. Microsoft. Retrieved May 9, 2012.
  4. Pierre-Pierre, Gary (May 28, 1996). "Philip B. Healey, 72, Is Dead; Assemblyman Fought for Elderly". The New York Times. Retrieved August 16, 2009.
  5. 1 2 3 "Corridor Management Plan for Select Historic Long Island Parkways". Colonie, NY: New York State Department of Transportation. July 2010. Retrieved May 9, 2012.
  6. 1 2 "Bethpage Park Sold To State Board". The New York Times. May 25, 1934.
  7. "New Highway Across Long Island To Link North and South Shores". The New York Times. November 15, 1936. p. N1.
  8. Master Plan for Nassau County. Nassau County Department of Public Works. 1959.
  9. "History". Bethpage Bikeway. Colonie, NY: New York State Department of Transportation. Retrieved June 29, 2012.
  10. "Parkway to Lead to New L.I. Park". The New York Times. May 21, 1961. p. 46.
  11. Horsley, Carter B. (April 18, 1971). "Future of Caumsett on L.I. Worries Conservationists". The New York Times. p. BQ104.
  12. Arterial Progress 1959-1965. New York City: Triborough Bridge and Tunnel Authority.
  13. "Plan of Caumsett State Park". Clark and Fapuano Landscape and Architects. Long Island State Parks Commission. Retrieved June 29, 2012.
  14. Young, Monte R. (February 22, 1990). "Extension of Three Expressways Urged". Newsday (New York City).
  15. Long Island Transportation Plan 2000. Parsons Brinckerhoff. 2001.
  16. Cerra, Frances (January 18, 1987). "Blazing a New Trail in the Wilds of Nassau". The New York Times. Retrieved August 16, 2009.
  17. "Governor Pataki Announces New State Park on Long Island" (PDF) (Press release). Albany, NY: Office of the Governor of New York. September 21, 2002. Retrieved June 29, 2012.
  18. "Project Features". Bethpage Bikeway. Colonie, NY: New York State Department of Transportation. Retrieved June 29, 2012.
  19. "Bethpage Bikeway". Bethpage Bikeway. Colonie, NY: New York State Department of Transportation. Retrieved June 29, 2012.

External links

Wikimedia Commons has media related to Bethpage State Parkway.
This article is issued from Wikipedia - version of the Saturday, February 27, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.