CHAdeMO

CHAdeMO Association
"CHΛdeMO" logo
Formation 2010
Purpose CHAdeMO Association aims to increase quick-charger installations worldwide and to standardize how to charge the vehicles.
Website http://chademo.com

CHAdeMO is the trade name of a quick charging method for battery electric vehicles delivering up to 62.5 kW of high-voltage direct current via a special electrical connector. It is proposed as a global industry standard by an association of the same name[1] and included in IEC 62196 as type 4.

CHAdeMO is an abbreviation of "CHArge de MOve", equivalent to "move using charge" or "move by charge". The name is also a pun drawn from O cha demo ikaga desuka in Japanese,[1] translating to English as "How about some tea?", referring to the time it would take to charge a car.[2] CHAdeMO can charge low-range (120km / 75miles) electric cars in less than half an hour.

CHAdeMO Association

CHAdeMO was formed by The Tokyo Electric Power Company, Nissan, Mitsubishi and Fuji Heavy Industries (the manufacturer of Subaru vehicles). Toyota later joined as its fifth executive member.[3][4] Three of these companies have developed electric vehicles that use TEPCO's DC connector for quick charging.

DC fast charging

Most electric vehicles (EVs) have an on-board charger that uses a rectifier circuit to transform alternating current from the electrical grid (mains AC) to direct current (DC) suitable for recharging the EV's battery pack. Cost and thermal issues limit how much power the rectifier can handle, so beyond around 240 V AC and 75 A it is better for an external charging station to deliver direct current (DC) to the vehicle's battery pack. Given these limits, most conventional charging solutions are based on either 240V/30A service in the USA and Japan, 240 V, 70 A service in Canada or the 230 V, 15 A or 3Φ, 400 V, 32 A service in Europe and Australia. (While AC charging systems have been specified with higher limits - SAE J1772-2009 has an option for 240 V, 80 A and VDE-AR-E 2623-2-2 has 3Φ, 400 V, 63 A - these charging station types have been rarely deployed in the US and only electric vehicles made by Tesla have a matching rectifier.)

For faster charging, dedicated chargers can be built in permanent locations and provided with high-amperage connections to the grid. In this style of connection, the charger's DC output has no effective limit, theoretical or practical. Such high voltage and high-current charging is called a DC Fast Charge (DCFC) or DC Quick Charging (DCQC).

TEPCO has developed patented technology and a specification for high-voltage (up to 500 V DC) high-current (125 A) automotive fast charging via a JARI (Japan Automobile Research Institute) DC fast charge connector.[5] It appears this is the basis for the CHAdeMO protocol.[6] The connector is specified by the JEVS (Japan Electric Vehicle Standard) G105-1993 from the JARI.[7]

In addition to carrying power the connector also makes a data connection using the CAN bus protocol.[8] This performs functions such as a safety interlock to avoid energizing the connector before it's safe (similar to SAE J1772), transmitting battery parameters to the charging station including when to stop charging (top battery percentage, usually 80%), target voltage, and total battery capacity, and while charging how the station should vary its output current.[9]

Vehicle charging

CHAdeMO charging socket (left) on an all-electric Nissan Leaf. An SAE J1772 socket is also shown on the right.
CHAdeMO charging socket (right) on a Mitsubishi Outlander P-HEV (plug-in hybrid). A regular charging SAE J1772 socket is also shown on the left.

The CHAdeMO quick charge option was promoted by Nissan-Renault and it has found acceptance with Japanese car manufacturers to allow their electric cars to benefit from the CHAdeMO charger network in Japan. Models supporting CHAdeMO charging include:

After the creation of the IEC 62196-3 offboard charger standard, Nissan accepted proposals to have DC charging stations equipped with both Chademo and Combo outlets.[10] Quick Charge Power of San Diego plans to offer Chademo retrofits for the second generation Toyota RAV4 EV and the Mercedes B-Class starting in 2015.[11]

Deployment

CHAdeMO-type fast charging stations have been installed in great numbers by the utility TEPCO in Japan, which required the creation of an additional power distribution network to supply these stations.[12]

As of April 20, 2016, the CHAdeMO Association web site states that there are 11,291 CHAdeMO chargers installed. These include 6,469 in Japan, 3,028 in Europe, 1,686 in the USA, and 108 elsewhere.[13]

CHAdeMO Installed Base[14]
Country Stations
May 2015
Stations
March 2012
Stations
March 2011
Australia 5 1
Austria 29 3
Belarus 2
Belgium 39 3
Brazil 2
Chile 5 1
Canada 44 4
Czech Republic 10
Denmark 59 3
Estonia 163 148[15]
Finland 33
France 214 9
Greece 1
Germany 113 18
Hong Kong 7 11[16]
Hungary 12 1
Iceland 8 8
Ireland 67 19
Italy 14 1
Japan (public) 5484 980 582
Japan (private) 70 70
Latvia 3
Lithuania 3
Luxemburg 2 1
Mexico 2
Netherlands 495[17] 21
New Zealand 2 2
Norway 171 16
Portugal 18 18
Slovakia 19 3 1
Slovenia 2 4
Spain 105 6
Sri Lanka 25[18] 0
Sweden 83 5
Switzerland 57 4
Turkey 1 1
United Kingdom 291 36
United States 1337 355+[19]

Compatible charging stations

In the USA, Aker Wade Power Technologies has entered into a licensing agreement with TEPCO to manufacture and market DC fast chargers for electric vehicles.[5] Eaton Corporation has demonstrated a CHAdeMO-compatible DC Quick Charger[20] recharging Mitsubishi iMiEV cars.[21] ECOtality has deployed the Blink DC Fast Charger, which is outfitted with two CHAdeMO-compliant electric vehicle charging connectors, in the Blink Network.[22] AeroVironment offers a broad line of DC fast chargers including two CHAdeMO certified Quick Charger models. Princeton Power Systems' UL-certified (2202 and 1741) bi-directional CHADEMO charger fast-charger is capable of charging and discharging from the Nissan LEAF, for both grid-tied and backup-power modes. The fast-chargers are available in 10 kW, 15 kW, and 30 kW sizes. Fuji Electric Corporation of America announced a 25 kW CHAdeMO quick charger[23] integrated with Coulomb Technologies’ ChargePoint® Network.[24] ABB manufactures 50 kW and 20 kW CHAdeMO models with UL certification for the Americas markets.

Recently Andromeda Power introduced the first and only mobile DC CHAdeMO 50 kW charger .[25]

In Europe, Evtronic,[26] Schneider-Electric, SGTE Power,[27] CIRCONTROL (Spanish manufacturer), ABB, formerly Epyon,[28]GH EverDrive and Efacec that was the first european company to get CHAdeMO certification, make fast chargers equipped with the latest CHAdeMO communication protocol.

Nissan has developed a Quick EV Charger that follows the CHAdeMO protocol for 1,470,000 to 1,732,500 Yen (approx. US$16,000–19,000 as of May 2010) and intends to install them at 200 dealers in Japan.[7]

Polar Power Inc. also has developed Mobile Rapid Battery Charging Generators (8340P-40422)for Electric Car Applications; multiple variations of the CHAdeMo Protocol can be stored in the Polar Charger at the same time and automatically implemented when the charge is plugged into that vehicle model. These DC Rapid Chargers are set up to communicate with CHAdeMo and can be programmed to operate with other battery / automotive systems.[29]

The state of California will be installing 200 public fast-charging stations that support both CHAdeMO and the SAE fast-charge system through a settlement with NRG Energy.[30][31]

Other type IEC 62196 standards

SAE J1772 offers a standard for Level 1 (120V) and Level 2 (240V) EV charging. The 2009 version defined a connector for 120 V/240 VAC charging up to 19.2 kW.[32] In October 2012, SAE revised the specification to add a Combo Coupler variant of the J1772 connector with additional pins to accommodate fast DC charging at 200–450 V DC up to 90 kW.[33] The Nissan Leaf has receptacles for both the TEPCO and SAE J1772-2009 connectors, though in the United States the TEPCO plug is only included as a factory option on the higher-end SL model. It is also available as a $700 factory added feature on the S and SV models.[34]

German companies have proposed the VDE-AR-E 2623-2-2 standard as an implementation of IEC 62196[35] in IEC proposal 62196-2-X.[36] It uses the round seven-pin Mennekes connector to deliver up to 63 A three-phase (at 400 V in Central Europe). This connector has been chosen by several European automakers for prototype electric vehicles.[37] It will also be extended with DC wires into a Combo Coupler variant.

Both these national standards have been added to the international IEC 62196-2 standard as "Type 1" and "Type 2" respectively. IEC 62196-2 also documents the connector type proposed by the EV Plug Alliance as "Type 3". Following up to Part 2 of IEC 62196 there has been approved new work on a Part 3[38] of the standard covering DC charging with the specification expected to be final by December 2013.[39] This international IEC connector for DC charging will either extend or replace the national CHAdeMO standard. On occasion of the second EV World Summit in June 2013 both a Chademo and a Volkswagen-group spokesperson have pointed out that a concurrency between Chademo and Combined Charging System is not required as the additional cost of a dual-protocol rapid charge station is a mere 5% - thus multi-standard DC chargers are being advocated by Chademo, Volkswagen and Nissan so that cars with either a Chademo coupler or a Combo coupler can take advantage of a rapid charge installation.[10]

Gallery

References

  1. 1 2 "General Outline of "CHAdeMO Association"" (PDF) (Press release). TEPCO. 2010-03-15. Retrieved 2010-05-13.
  2. Sebastian Blanco (2009-03-15). "CHAdeMO suggests drinking green tea while recharging your electric car". Autoblog Green. Retrieved 2010-05-13.
  3. "Establishment of CHAdeMO Association" (Press release). TEPCO. 2010-03-15. Retrieved 2010-05-13.
  4. Chuck Squatriglia (2010-03-16). "Let’s Have Tea While Charging Our EV". Autopia. Wired.com. Retrieved 2010-05-13.
  5. 1 2 "Tokyo Electric Power Licenses Aker Wade to Build Level III DC Fast Chargers". Green Car Congress. 2010-01-15. Retrieved 2010-04-13.
  6. "Exclusive interview with the CEO of Aker Wade: "Standardisation is the key"". cars21.com. 2010-04-29. Retrieved 2010-05-13.
  7. 1 2 "Nissan Introduces Quick EV Charger" (Press release). Nissan. 2010-05-21. Retrieved 2010-05-21.
  8. http://chademo.com/05_protocol.html
  9. Takafumi Anegawa (2010-12-01). "Safety Design of CHAdeMO Quick Charger and its impact on Power Grid" (PDF). TEPCO. Retrieved 2011-01-25.
  10. 1 2 "2013 World EV Summint in Norway - Chademo, Nissan and Volkswagen align on promoting multi-standard fast chargs to accelerate infrastructure deployment and EV adoption" (PDF). Chademo Association Europe. 2013-06-11. Retrieved 2013-07-09.
  11. https://transportevolved.com/2014/05/30/one-year-life-electric-car-part-2-3/
  12. André P. Slowak (2012-06-27). "Die Durchsetzung von Schnittstellen in der Standardsetzung: Fallbeispiel Ladesystem Elektromobilität" (PDF) (in German). Universität Hohenheim, Forschungszentrum Innovation und Dienstleistung. p. 29. ISSN 1868-0720. Retrieved 2012-07-19. Die deutsche Industrie greift auf das herkömmliche Stromverteilernetz zurück. Tepco hingegen hat für CHAdeMO ein eigenes Verteilernetz aufgebaut.
  13. "CHAdeMO official website". Retrieved April 27, 2016.
  14. André P. Slowak (2012-06-27). "Die Durchsetzung von Schnittstellen in der Standardsetzung: Fallbeispiel Ladesystem Elektromobilität" (PDF) (in German). Universität Hohenheim, Forschungszentrum Innovation und Dienstleistung. p. 36. ISSN 1868-0720. Retrieved 2012-07-19. Tabelle 8: Installierte Basis CHAdeMO (Stand: Juni 2012) Datenquellen: CHAdeMO (2011, 2012a, 2012b).
  15. http://majandus24.postimees.ee/1114538/euroopa-liit-tahab-kehtestada-eestile-sobimatut-elektriauto-kiirlaadija-standardit
  16. http://www.epd.gov.hk/epd/english/environmentinhk/air/prob_solutions/promotion_ev.html
  17. At the end of 2015 (http://www.rvo.nl/onderwerpen/duurzaam-ondernemen/energie-en-milieu-innovaties/elektrisch-rijden/stand-van-zaken/cijfers)
  18. http://www.green-frontiers.net/green-frontiers/
  19. http://www.afdc.energy.gov/locator/stations/results?utf8=%E2%9C%93&location=u.s.a.&filtered=true&fuel=ELEC&owner=all&payment=all&ev_dc_fast=true&radius_miles=50
  20. Erin Milnes (2010-09-10). "With Electric Cars Soon to Arrive, Where Is Charging Headed?". The Solar Home & Business Journal. Retrieved 2010-09-29. External link in |publisher= (help)
  21. "Eaton Charging Stations Showcase Electric Vehicle Infrastructure at Plug-In 2010" (Press release). Eaton Corporation. 2010-07-20. Retrieved 2010-09-29.
  22. "Blink EVSE Products". ECOtality. 2013-07-02. Retrieved 2013-07-02.
  23. "DC Quick Charger For Electric Vehicles" (PDF). Fuji Electric. 2012-03-06. Retrieved 2012-05-17.
  24. "Fuji Electric Announces Agreement With Coulomb Technologies" (Press release). Fuji Electric & Coulomb Technologies. 2012-05-01. Retrieved 2012-05-17.
  25. "Andromeda Power (ORCA Mobile)". Andromeda Power Corporation. 2012-04-03. Retrieved 2012-04-03.
  26. "Evtronic make fast chargers compliant with Chademo communication protocol" (Press release). Evtronic. 2010-07-02. Retrieved 2010-07-02.
  27. "SGTE Power makes CHAdeMO EV Quick Chargers" (Press release). SGTE Power. 2010-07-13. Retrieved 2010-07-13.
  28. "Epyon Joins International Group for Fast Charging Standard" (PDF) (Press release). Epyon. 2010-04-15. Retrieved 2010-05-13.
  29. "Mobile Rapid Battery Charging for Electric Car Applications".
  30. "California to gain new EV charging stations under NRG settlement", Los Angeles Times, March 23, 2012
  31. "$100 Million for Electric Car Charging in California from NRG Energy"| Cleantechnica.com, May 14th, 2012
  32. "SAE standard on EV charging connector approved". SAE International. 2010-01-15. Retrieved 2010-03-14.
  33. "SAE International Releases New Fast-Charging Combo Coupler Standard (SAE J1772) for Plug-In Electric and Electric Vehicles" (Press release). SAE International. 2012-10-15. Retrieved 2015-06-29.
  34. Omar Rana (2010-09-16). "$700 quick charge option on Nissan LEAF allows 80% charge in 30 mins". egmCarTech. Retrieved 2011-05-20.
  35. "EV Charging connectors". 2009-04-30. Retrieved 2009-06-07.
  36. Winfried Tröster (2009-01-29). "62196 Part 2-X: Dimensional interchangeability requirements for pin and contact-tube vehicle couplers" (PDF). International Electrotechnical Commission. Retrieved 2010-04-15.
  37. Xavier Navarro (2009-05-20). "The European standard charging plug for cars is selected after Mennekes design". Autoblog Green. Retrieved 2010-04-15.
  38. "Dimensional interchangeability requirements for pin and contact-tube coupler with rated operating voltage up to 1 000 V d.c. and rated current up to 400 A for dedicated d.c. charging"
  39. IEC Dashboard - Project: IEC 62196-3 Ed. 1.0, accessed 27. February 2011

External links

Wikimedia Commons has media related to CHAdeMO.
This article is issued from Wikipedia - version of the Friday, April 29, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.