Elementary charge

Elementary electric charge
Definition: Charge of a proton
Symbol e or sometimes q
Value in Coulombs: 1.6021766208(98)×10−19 C[1]

The elementary charge, usually denoted as e or sometimes q, is the electric charge carried by a single proton, or equivalently, the magnitude of the electric charge carried by a single electron, which has charge e.[2] This elementary charge is a fundamental physical constant. To avoid confusion over its sign, e is sometimes called the elementary positive charge. This charge has a measured value of approximately 1.6021766208(98)×10−19 coulombs.[1] In the cgs system, e is 4.80320425(10)×10−10 statcoulombs.[3]

The magnitude of the elementary charge was first measured in Robert A. Millikan's noted oil drop experiment in 1909.[4]

As a unit

Elementary charge   (as a unit of charge)
Unit system Atomic units
Unit of electric charge
Symbol e or q
Unit conversions
1 e or q in ...... is equal to ...
   coulomb    1.6021766208(98)×10−19[1]
   statcoulomb    4.80320425(10)×10−10
   √(MeVfm)    √1.4399764

In some natural unit systems, such as the system of atomic units, e functions as the unit of electric charge, that is e is equal to 1 e in those unit systems. The use of elementary charge as a unit was promoted by George Johnstone Stoney in 1874 for the first system of natural units, called Stoney units.[5] Later, he proposed the name electron for this unit. At the time, the particle we now call the electron was not yet discovered and the difference between the particle electron and the unit of charge electron was still blurred. Later, the name electron was assigned to the particle and the unit of charge e lost its name. However, the unit of energy electronvolt reminds us that the elementary charge was once called electron.

The maximum capacity of each pixel in a charge-coupled device image sensor, known as the well depth, is typically given in units of electrons,[6] commonly around 105 e per pixel.

Quantization

Charge quantization is the principle that the charge of any object is an integer multiple of the elementary charge. Thus, an object's charge can be exactly 0 e, or exactly 1 e, −1 e, 2 e, etc., but not, say, 12 e, or −3.8 e, etc. (There may be exceptions to this statement, depending on how "object" is defined; see below.)

This is the reason for the terminology "elementary charge": it is meant to imply that it is an indivisible unit of charge.

Charges less than an elementary charge

There are two known sorts of exceptions to the indivisibility of the elementary charge: quarks and quasiparticles.

What is the quantum of charge?

All known elementary particles, including quarks, have charges that are integer multiples of 13 e. Therefore, one can say that the "quantum of charge" is 13 e. In this case, one says that the "elementary charge" is three times as large as the "quantum of charge".

On the other hand, all isolatable particles have charges that are integer multiples of e. (Quarks cannot be isolated: they only exist in collective states like protons that have total charges that are integer multiples of e.) Therefore, one can say that the "quantum of charge" is e, with the proviso that quarks are not to be included. In this case, "elementary charge" would be synonymous with the "quantum of charge".

In fact, both terminologies are used.[7] For this reason, phrases like "the quantum of charge" or "the indivisible unit of charge" can be ambiguous, unless further specification is given. On the other hand, the term "elementary charge" is unambiguous: it universally refers to a quantity of charge equal to that of a proton.

Experimental measurements of the elementary charge

In terms of the Avogadro constant and Faraday constant

If the Avogadro constant NA and the Faraday constant F are independently known, the value of the elementary charge can be deduced, using the formula

e = \frac{F}{N_{\mathrm{A}}}

(In other words, the charge of one mole of electrons, divided by the number of electrons in a mole, equals the charge of a single electron.)

In practice, this method is not how the most accurate values are measured today: Nevertheless, it is a legitimate and still quite accurate method, and experimental methodologies are described below:

The value of the Avogadro constant NA was first approximated by Johann Josef Loschmidt who, in 1865, estimated the average diameter of the molecules in air by a method that is equivalent to calculating the number of particles in a given volume of gas.[8] Today the value of NA can be measured at very high accuracy by taking an extremely pure crystal (in practice, often silicon), measuring how far apart the atoms are spaced using X-ray diffraction or another method, and accurately measuring the density of the crystal. From this information, one can deduce the mass (m) of a single atom; and since the molar mass (M) is known, the number of atoms in a mole can be calculated: NA = M/m.[9]

The value of F can be measured directly using Faraday's laws of electrolysis. Faraday's laws of electrolysis are quantitative relationships based on the electrochemical researches published by Michael Faraday in 1834.[10] In an electrolysis experiment, there is a one-to-one correspondence between the electrons passing through the anode-to-cathode wire and the ions that plate onto or off of the anode or cathode. Measuring the mass change of the anode or cathode, and the total charge passing through the wire (which can be measured as the time-integral of electric current), and also taking into account the molar mass of the ions, one can deduce F.[9]

The limit to the precision of the method is the measurement of F: the best experimental value has a relative uncertainty of 1.6 ppm, about thirty times higher than other modern methods of measuring or calculating the elementary charge.[9][11]

Oil-drop experiment

Main article: Oil-drop experiment

A famous method for measuring e is Millikan's oil-drop experiment. A small drop of oil in an electric field would move at a rate that balanced the forces of gravity, viscosity (of traveling through the air), and electric force. The forces due to gravity and viscosity could be calculated based on the size and velocity of the oil drop, so electric force could be deduced. Since electric force, in turn, is the product of the electric charge and the known electric field, the electric charge of the oil drop could be accurately computed. By measuring the charges of many different oil drops, it can be seen that the charges are all integer multiples of a single small charge, namely e.

The necessity of measuring the size of the oil droplets can be eliminated by using tiny plastic spheres of a uniform size. The force due to viscosity can be eliminated by adjusting the strength of the electric field so that the sphere hovers motionless.

Shot noise

Main article: Shot noise

Any electric current will be associated with noise from a variety of sources, one of which is shot noise. Shot noise exists because a current is not a smooth continual flow; instead, a current is made up of discrete electrons that pass by one at a time. By carefully analyzing the noise of a current, the charge of an electron can be calculated. This method, first proposed by Walter H. Schottky, can give only a value of e accurate to a few percent.[12] However, it was used in the first direct observation of Laughlin quasiparticles, implicated in the fractional quantum Hall effect.[13]

From the Josephson and von Klitzing constants

Another accurate method for measuring the elementary charge is by inferring it from measurements of two effects in quantum mechanics: The Josephson effect, voltage oscillations that arise in certain superconducting structures; and the quantum Hall effect, a quantum effect of electrons at low temperatures, strong magnetic fields, and confinement into two dimensions. The Josephson constant is

K_\mathrm{J} = \frac{2e}{h}

(where h is the Planck constant). It can be measured directly using the Josephson effect.

The von Klitzing constant is

R_\mathrm{K} = \frac{h}{e^2}.

It can be measured directly using the quantum Hall effect.

From these two constants, the elementary charge can be deduced:

e = \frac{2}{R_\mathrm{K} K_\mathrm{J}}.

CODATA method

In the most recent CODATA adjustments,[9] the elementary charge is not an independently defined quantity. Instead, a value is derived from the relation

e^2 = \frac{2h \alpha}{\mu_0 c} = 2h \alpha \epsilon_0 c

where h is the Planck constant, α is the fine structure constant, μ0 is the magnetic constant, ε0 is the electric constant and c is the speed of light. The uncertainty in the value of e is currently determined almost entirely by the uncertainty in the Planck constant.

The most precise values of the Planck constant come from watt balance experiments, which are used to measure the product K2
J
RK. The most precise values of the fine structure constant come from comparisons of the measured and calculated value of the gyromagnetic ratio of the electron.[9]

References

  1. 1 2 3 "CODATA Value: elementary charge". The NIST Reference on Constants, Units, and Uncertainty. US National Institute of Standards and Technology. June 2015. Retrieved 2015-09-22.
  2. Note that the symbol e has many other meanings. Somewhat confusingly, in atomic physics, e sometimes denotes the electron charge, i.e. the negative of the elementary charge.
  3. This is derived from the NIST value and uncertainty, using the fact that one coulomb is exactly 2997924580 statcoulombs. (The conversion is ten times the numerical speed of light in meters/second.)
  4. Robert Millikan: The Oil-Drop Experiment
  5. G. J. Stoney (1894). "Of the "Electron," or Atom of Electricity". Philosophical Magazine. 5 38: 418–420. doi:10.1080/14786449408620653.
  6. Apogee CCD University – Pixel Binning
  7. Q is for Quantum, by John R. Gribbin, Mary Gribbin, Jonathan Gribbin, page 296, Web link
  8. Loschmidt, J. (1865). "Zur Grösse der Luftmoleküle". Sitzungsberichte der kaiserlichen Akademie der Wissenschaften Wien 52 (2): 395–413. English translation.
  9. 1 2 3 4 5 Mohr, Peter J.; Taylor, Barry N.; Newell, David B. (2008). "CODATA Recommended Values of the Fundamental Physical Constants: 2006". Rev. Mod. Phys. 80 (2): 633–730. arXiv:0801.0028. Bibcode:2008RvMP...80..633M. doi:10.1103/RevModPhys.80.633. Direct link to value..
  10. Ehl, Rosemary Gene; Ihde, Aaron (1954). "Faraday's Electrochemical Laws and the Determination of Equivalent Weights". Journal of Chemical Education 31 (May): 226–232. Bibcode:1954JChEd..31..226E. doi:10.1021/ed031p226.
  11. Mohr, Peter J.; Taylor, Barry N. (1999). "CODATA recommended values of the fundamental physical constants: 1998". J. Phys. Chem. Ref. Data 28 (6): 1713–1852. doi:10.1103/RevModPhys.72.351..
  12. Beenakker, Carlo; Schönenberger, Christian. "Quantum Shot Noise. Fluctuations in the flow of electrons signal the transition from particle to wave behavior". arXiv:cond-mat/0605025..
  13. de-Picciotto, R.; Reznikov, M.; Heiblum, M.; Umansky, V.; Bunin, G.; Mahalu, D. (1997). "Direct observation of a fractional charge". Nature 389 (162–164): 162. Bibcode:1997Natur.389..162D. doi:10.1038/38241..

Further reading

This article is issued from Wikipedia - version of the Friday, May 06, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.