Ciani Spillo

Spillo
Role Single seat competition glider
National origin Italy
Manufacturer SSVV (Sezioni Sperimentale di Volo a Vela), Milan
Designer Edgardo Ciani
First flight 1954
Number built 1


The Ciani EC.37/53 Spillo or SSVV EC.37/53 Spillo was a single seat competition glider designed and built in Italy in the 1950s. It had the highest aspect ratio wing of any wooden glider. Only one was built.

Design and development

Edgardo Ciani's main aim when he designed the Spillo was to obtain good performance at the high speeds flown between thermals.[1] Its fuselage was conventional for the time but the wing attracted a great deal of attention on account of its high aspect ratio of almost 30 and its thinness, only 15% of chord at the wing root. Like most glider wings of the early 1950s, it was an all wood structure and the Spillo had the highest aspect ratio wing of any wooded glider, pushing that technology to the limit.[2] Chiani named it Spillo, (in English: pin), after its long, slender wing.[3]

A difficulty with a thin, high aspect ratio wooden wing is that a very strong and therefore heavy spar is needed, with the result that the Spillo had the highest wing loading of any glider of its time. It used a single double box spar with thick laminated wood flanges and three vertical plywood webs. There were poplar ribs; the wing, including the ailerons was skinned with plywood, carefully smoothed and filled to follow accurately the NACA non-laminar flow airfoil.[2] Upper surface hinged ailerons reached the wing tip and occupied about 36% of the span, though they were later slightly extended. In plan the wings were straight tapered, with a tip to root chord ratio of 0.30, ending with small, streamlined bodies known as salmons. Initially there were no flaps, but quarter span long gapless spoilers extended below the wing at mid-chord.[1]

The rest of the Spillo was more conventional and the fuselage was similar to that of the CCV 7 Pinocchio,[3] a tapering ply oval section monocoque with wooden frames and stringers and the high wing mounted immediately behind the short, high, single piece, side hinged canopy. For take-off the Spillo used a jettisonable wheel, landing on a small, thin, rubber sprung skid, extending from the nose to behind mid-chord and fitted with two vertical braking blades. At the rear, the tailplane was mounted on top of the fuselage; it was quite small, with strongly swept leading edges and tapered elevators split around the fin. The rudder was horn balanced and curved down to the keel behind a sloped straight leading edged rudder and fine.[1]

Like other Ciani designs, the Spillo was built by Sezioni Sperimentale di Volo a Vela (SSVV), an offshoot of the Aeroclub Volovelistio Milanese.[2] It first flew in 1954. In 1958 the wing trailing edge was modified, chiefly by the addition of camber changing plain flaps inboard of the ailerons which added low speed, thermalling lift as well as slowing landing approach speed. They could extend from +5° to −90°.[1] At the same time the aileron span was increased by 11% and the wing area by 3.5%;[1] the weight also increased slightly.[2] In 350 hours of flying the undercarriage had twice been damaged in fast landings onto bumpy ground, so the skid was reinforced.[1]

Operational history

The most important event that the Spillo attended was the World Gliding Championships meeting held in 1954 at Camphill in the UK. The weather was wet and not suited to a glider designed for strong thermals and long cross-country flights and its pilot, R. Brigliadori, was one of many competitors able to score on only one of the four days. The flexibility of the Spillo's wings attracted interest and concern, though only its vulnerable skid was damaged.[2] It later attended many other national and international competitions.[3]

The Spillo achieved the excellent glide angles which Cani had aimed for, though he later thought he had overemphasised this aspect. The flaps helped with landings but the spoilers proved inefficient.[1]

Specifications (original configuration, no flaps)

Data from The World's Sailplanes[1]

General characteristics

Performance


Notes

  1. 1 2 3 4 5 6 7 8 Shenstone, B.S.; K.G. Wilkinson (1963). The World's Sailplanes:Die Segelflugzeuge der Welt:Les Planeurs du Monde Volume II (in English, French, and German) (1st ed.). Zurich: Organisation Scientifique et Technique Internationale du Vol a Voile (OSTIV) and Schweizer Aero-Revue. pp. 34–36.
  2. 1 2 3 4 5 Simons, Martin (2006). Sailplanes 1945-1965 (2nd revised ed.). Königswinter: EQIP Werbung & Verlag GmbH. pp. 93–4. ISBN 3-9807977-4-0.
  3. 1 2 3 Pedrielli, Vincenzo; Camastra, Francesco (2011). Italian Vintage Sailplanes. Königswinter: EQIP Werbung & Verlag GmbH. pp. 158–9. ISBN 978-3-9808838-9-4.

References

  • Pedrielli, Vincenzo; Camastra, Francesco (2011). Italian Vintage Sailplanes. Königswinter: EQIP Werbung & Verlag GmbH. pp. 158–9. ISBN 978-3-9808838-9-4. 
  • Shenstone, B.S.; K.G. Wilkinson (1963). The World's Sailplanes:Die Segelflugzeuge der Welt:Les Planeurs du Monde Volume II (in English, French, and German) (1st ed.). Zurich: Organisation Scientifique et Technique Internationale du Vol a Voile (OSTIV) and Schweizer Aero-Revue. pp. 34–36. 
  • Simons, Martin (2006). Sailplanes 1945-1965 (2nd revised ed.). Königswinter: EQIP Werbung & Verlag GmbH. pp. 93–4. ISBN 3 9807977 4 0. 

External links

This article is issued from Wikipedia - version of the Friday, February 12, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.