Class U special wagon

The International Union of Railways groups all special classes of railway goods wagon (less those in classes F, H, L, S or Z) into Class U in its goods wagon classification system.

These are:

Between 1964 and 1979 bulk goods wagons for liquid and gaseous materials (tank wagons) were included in Class U before being reclassified in 1980 as Class Z.

Bulk goods wagons for transporting powders (powder wagons)

Two-axled powder wagon for building materials (cement, lime)

The powder wagon is a special form of bulk goods wagon designed to transport goods in powder form. These wagons are pneumatically unloaded, usually by using compressed air. For goods that might react with oxygen in the compressed air, nitrogen is used instead. These wagons are used for bulk commodities, such as cement, that are so fine-grained they cannot be poured, or at least do not pour very well, and so cannot be emptied under gravity. Under the UIC system they are given the category letter U and index letter c. The do not normally have their own compressors but must be unloaded using external equipment.

Well wagons

Uik 630 (21 80 990 5 904-8)

This group has a large variety of different types of wagon that range from the two-axle well wagon to the 36-axle Schnabel wagon.

The current designation for all well wagons is Ui, which can be supplemented as necessary by the index letters a, aa, k, kk or s. The load limits on low-loading wagons are not indicated by letters. The former German wagon classes were St and SSt.

In 1998 the Deutsche Bahn had a total of 180 well wagons of 43 different types. They are used to move very large and heavy goods that would exceed the loading gauge on flat wagons. Such loads typically include: combine harvesters, generators or narrow gauge vehicles.

Schnabel wagons

ÖBB Schnabel wagon with transformer at Koblenz-Ehrenbreitstein station
Arrival of a Schnabel wagon at its destination with a large transformer, the load will now be transported by road on a well wagon
Undercarriage of a Deutsche Bahn Class Uaai 687.9 Schnabel wagon
Onward transportation of the large transformer by road to the electricity substation

The largest low-loading wagons are designed as Schnabel wagons, made from two completely separate sections. Each section rests on multiple-axle bogies or groups of bogies. The two sections each support a beak-shaped carrying arm which, in turn, supports one side of a low-loading platform or is directly fixed to the outsize load to be transported. In the latter case the load becomes temporarily part of the vehicle itself. The wagons have hydraulic equipment with which the load can be raised or lowered in order to manoeuvre it past obstacles. There are about 30 examples of Schnabel wagon in Europe, North America and Asia.

Typical loads for these vehicles are large boilers for power stations, turbine components or power station transformers. Due to their heavy weight and outsize dimensions these goods are not usually transported in normal goods trains, but are moved in special trains and need careful preparation. Whenever transportation restrictions arise with a wagon and its load due to its weight and size, it is designated as an abnormal load and must be labelled in accordance with the RIV as a U type. When the vehicle is unladen the two carrying arms are joined directly to one another; the wagon can then travel in goods trains at normal speeds.

List of selected well wagons

Class number Maximum carrying capacity Wheelsets Quantity
(DB as at 31 Dec 1997)
Uis 632 25 t (24.6 long tons; 27.6 short tons) 2 25
Uiks 635 19 t (18.7 long tons; 20.9 short tons) 2 27
Uais 732 50 t (49.2 long tons; 55.1 short tons) 4 16
Uaai 812 159 t (156 long tons; 175 short tons) 10 1
Uaai 820 157 t (155 long tons; 173 short tons) 12 1
Uaai 821 190 t (190 long tons; 210 short tons)
(180 t or 180 long tons or 200 short tons
with suspension bars)		 12 1
Uaai 823 230 t (230 long tons; 250 short tons) 16 1
Uaai 831 275 t (271 long tons; 303 short tons)
(250 t or 250 long tons or 280 short tons
with suspension bars)		 20 2
Uaai 836 317 t (312 long tons; 349 short tons) 20 1
Uaai 837 398 t (392 long tons; 439 short tons) 24 1
Uaai 838 341 t (336 long tons; 376 short tons)
(313 t or 308 long tons or 345 short tons
with suspension bars)		 24 1
Uaai 839 454 t (447 long tons; 500 short tons) 32 1

The Class Uaai low-loading wagon with special equipment is marketed Europe-wide exclusively by the heavy load department, Heavy Cargo + Service, of Nuclear Cargo + Service.[1][2]

Hopper wagons with loading hatches

A range of funnel-shaped self-discharging wagons is also classed as special wagons. Their external shape resembles the open hoppers, but they have an enclosed roof with loading hatches or in some other way do not fulfil the criteria for a wagon with opening roof.

The DB has grouped several of the lime wagons with four hatches taken over from the DR into Class Uaoos-y. Some of these wagons have since been fitted with swing roofs.

In the SNCF there is a large number of grain wagons in service that are classed as special wagons.

See also

References

  1. ↑ "Heavy Cargo + Service, Tiefladewagen für Großraum- und Schwerlasttransporte". Retrieved 2009-02-19.
  2. ↑ "Bauart Uaai: Schienentiefladewagen mit Sondereinrichtungen, Übersicht mit technischer Spezifikation und Wagenkizzen". Retrieved 2009-02-19.

Literature and media

This article is issued from Wikipedia - version of the Tuesday, March 01, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.