Methods of coin debasement

This article is about grassroots methods of coin debasement. For coin debasement generally, see debasement.

Coin debasement is the act of decreasing the amount of precious metal in a coin, while continuing to circulate it at face value. This was frequently done by governments in order to inflate the amount of currency in circulation; typically, some of the precious metal was replaced by a cheaper metal when the coin was minted. But when done by an individual, precious metal was physically removed from the coin, which could then be passed on at the original face value, leaving the debaser with a profit. Coin debasement was effected by several methods, including clipping (shaving metal from the coin's circumference) and sweating (shaking the coins in a bag and collecting the dust worn off).

Until the mid-20th century, coins were often made of silver or gold, which were quite soft and prone to wear. This meant coins naturally got lighter (and thus less valuable) as they aged, so coins that had lost a small amount of bullion would go unnoticed. Modern coins are made of hard, cheap metals such as steel, copper or a copper-nickel alloy, reducing wear and making it difficult and unprofitable to debase them.

Clipping is the act of shaving off a small portion of a precious metal coin for profit. Over time, the precious metal clippings could be saved up and melted into bullion or used to make new coins.[1][2]

Coin clipping was usually considered by the law to be of a similar magnitude to counterfeiting, and was occasionally punished by death,[1][3][4] a fate which befell Thomas Rogers and Anne Rogers.

Coin clipping is why many coins have the rim of the coin marked with stripes (milling or reeding), text (engraving) or some other pattern that would be destroyed if the coin were clipped. This practice is attributed to Isaac Newton, who was appointed Master of the Mint in 1699.[5] Although the metal used in most modern fiat coins has insignificant intrinsic value, modern milling can be a deterrent to counterfeiting, an aid to the blind to distinguish different denominations, or purely decorative.

Comparison of unclipped and clipped Siliqua from the Hoxne Hoard
A silver coin in the centre a helmeted head surrounded by a circle of inscription with edging between that and the rim.
An unclipped siliqua 
A smaller silver coin in the centre a head - still a fairly round coin but the inscription is not intact and there is no space between it and the rim
Partially clipped siliqua 
A small silver coin mostly consisting of a human head and shoulders. The shape is irregular and there is only a vestige of writing.
A clipped siliqua 

In the process of sweating, coins were placed in a bag and shaken. The bits of metal that had worn off the coins were recovered from the bottom of the bag.[6] Sweating tended to wear the coin in a more natural way than clipping, and so was harder to detect.[7]

If the coin was large, a hole could be punched out of the middle, and the face of the coin hammered to close up the hole.[8] Or the coin could be sawed in half, and a plug of metal extracted from the interior. After filling the hole with a cheaper metal, the two halves would be welded back together again.[9] Verbal references to plugged quarters and plugged dimes eventually yielded the common phrase "not worth a plugged nickel" (or 'plug nickel', or even a plugged cent), emphasizing the worthlessness of such a tampered coin.[10]

References

  1. 1 2 Cooper, George (2008). The origin of financial crises. Harriman House. p. 46.
  2. Redish, Angela (2000). Bimetallism: an economic and historical analysis. Cambridge University Press. p. 54. ISBN 0-521-57091-3.
  3. See for example the English Treason Act 1415.
  4. Allen 2009, p. 71.
  5. Great Britain. Treasury. Information Division (1986). Economic Progress Report. Information Division of the Treasury.
  6. Sherwood 1893, p. 70.
  7. Allen 2009, p. 72.
  8. Sherwood 1893, p. 70–71.
  9. Sherwood 1893, p. 71.
  10. "The meaning and origin of the expression: Not worth a plugged nickel". Phrase Dictionary.

External links

This article is issued from Wikipedia - version of the Saturday, April 09, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.