Fluorescence intermittency in colloidal nanocrystals

Blinking colloidal nanocrystals is a phenomenon observed during studies of single colloidal nanocrystals that show that they randomly turn their photoluminescence on and off even under continuous light illumination.[1] This has also been described as luminescence intermittency.[1] Similar behavior has been observed in crystals made of other materials. For example, porous silicon also exhibits this affect.[1]

Colloidal nanocrystals

Colloidal nanocrystals are a new class of optical materials that essentially constitute a new form of matter that can be considered as "artificial atoms." Like atoms, they have discrete optical energy spectra that are tunable over a wide range of wavelengths. The desired behavior and transmission directly correlates to their size. To change the emitted wavelength, the crystal is grown larger or smaller. Their electronic and optical properties can be controlled by this method. For example to change the emission from one visible wavelength to another simply use a larger or smaller grown crystal. However, this process would not be effective in conventional semiconductors such as gallium arsenide.[2]

The nanocrystal size controls a widely tunable absorption band resulting in widely tunable emission spectra. This tunability combined with the optical stability of nanocrystals and the great chemical flexibility in the nanocrystal growth have resulted in the widespread nanocrystal applications in use today. Practical device applications range from low-threshold lasers to solar cells and biological imaging and tracking.[3][4] Producing a specific type of luminescence known as photoluminescence nanocrystals show quite high quantum efficiency of up to 70% at room temperature. The missing 30% efficiency turns out to be an intrinsic property of nanocrystals.[5]

Random behavior

A representation of core-shell nanocrystals

Studies of single colloidal nanocrystals show that they randomly turn their photoluminescence on and off even under continuous light illumination. This tends to hinder progress for engineers and scientists who study single colloidal nanocrystals and try to use their fluorescent properties for biological imaging or lasing.[3][5]

The blinking in nanocrystals was first reported in 1996. The discovery was unexpected. The consensus is that blinking happens because illuminated nanocrystals can be charged (or ionized), and then neutralized. Under normal conditions when nanocrystal is neutral, a photon excites an electron-hole pair, which then recombines, emitting another photon and leading to photoluminescence. This process is called radiative recombination. If however, the nanocrystal is charged, the extra carrier triggers a process called non-radiative Auger recombination, where exciton energy is transferred to an extra electron or hole. Auger recombination occurs orders of magnitude faster than the radiative recombination. So photoluminescence is almost entirely suppressed in charged nanocrystals. Scientists still do not fully understand the origin of the charging and neutralization process. One of the photoexcited carriers (the electron or the hole) must be ejected from the nanocrystal. At some later time, the ejected charge returns to the nanocrystal (restoring charge neutrality and therefore radiative recombination). The details of how these processes occur still are not understood.[3][5]

Solutions

Researchers are attempting to eliminate the problem of blinking nanocrystals. One common solution is to suppress nanocrystal ionization. This could be done, for example, by growing a very thick semiconductor shell around the nanocrystal core. However, blinking was reduced, not eliminated, because the fundamental processes responsible for blinking - the non-radiative Auger recombination- were still present.

[3][5][6]

Characteriziation

One method of study attempts to characterize the blinking behavior by studying single crystals or single quantum dots. A powerful microscope is employed along with video equipment. Another method uses ensembles or large quantities of quantum dots and develops statistical information.[7][8]

References

  1. 1 2 3 Krauss, Todd; Brus, Louis (1999). "Charge, Polarizability, and Photoionization of Single Semiconductor Nanocrystals" (Free PDF download). Physical Review Letters 83 (23): 4840. Bibcode:1999PhRvL..83.4840K. doi:10.1103/PhysRevLett.83.4840. Retrieved 2012-09-15.
  2. Cartwright, Jon (10 May 2009). "Nanocrystals stop blinking". Chemistry World (Royal Society of Chemistry). Retrieved 2012-08-20.
  3. Bruchez Jr., M.; Moronne, M; Gin, P; Weiss, S; Alivisatos, AP (1998). "Semiconductor Nanocrystals as Fluorescent Biological Labels" (free PDF download). Science 281 (5385): 2013–6. Bibcode:1998Sci...281.2013B. doi:10.1126/science.281.5385.2013. PMID 9748157.
  4. 1 2 3 4 Wang, Xiaoyong; Ren, Xiaofan; Kahen, Keith; Hahn, Megan A.; Rajeswaran, Manju; Maccagnano-Zacher, Sara; Silcox, John; Cragg, George E.; et al. (2009). "Non-blinking semiconductor nanocrystals". Nature 459 (7247): 686–9. Bibcode:2009Natur.459..686W. doi:10.1038/nature08072. PMID 19430463.
  5. Xiaoyong Wang and Xiaofan Ren, Keith Kahen, Megan A. Hahn, Manju Rajeswaran, Sara Maccagnano-Zacher, John Silcox, George E. Cragg, Alexander L. Efros, and Todd Krauss "Non-Blinking Semiconductor Nanocrystals". Photophysics of Quantum Dots and Nanostructures II. Optics InfoBase: The Optical Society. October 11, 2009. Retrieved 2012-08-20.
  6. Pelton, Matthew; Grier, David G.; Guyot-Sionnest, Philippe (1970). "Characterizing quantum-dot blinking using noise power spectra". Applied Physics Letters (Free PDF download) 85 (5): 819. arXiv:cond-mat/0404589. Bibcode:2004ApPhL..85..819P. doi:10.1063/1.1779356.
  7. Koppes, Steve (August 19, 2004). "New method is developed to measure blinking nanocrystals". The University of Chicago Chronicle. Vol. 23 No. 20. Retrieved 2012-08-24

External links

This article is issued from Wikipedia - version of the Saturday, December 26, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.