Commutation theorem

In mathematics, a commutation theorem explicitly identifies the commutant of a specific von Neumann algebra acting on a Hilbert space in the presence of a trace. The first such result was proved by F.J. Murray and John von Neumann in the 1930s and applies to the von Neumann algebra generated by a discrete group or by the dynamical system associated with a measurable transformation preserving a probability measure. Another important application is in the theory of unitary representations of unimodular locally compact groups, where the theory has been applied to the regular representation and other closely related representations. In particular this framework led to an abstract version of the Plancherel theorem for unimodular locally compact groups due to Irving Segal and Forrest Stinespring and an abstract Plancherel theorem for spherical functions associated with a Gelfand pair due to Roger Godement. Their work was put in final form in the 1950s by Jacques Dixmier as part of the theory of Hilbert algebras. It was not until the late 1960s, prompted partly by results in algebraic quantum field theory and quantum statistical mechanics due to the school of Rudolf Haag, that the more general non-tracial Tomita–Takesaki theory was developed, heralding a new era in the theory of von Neumann algebras.

Commutation theorem for finite traces

Let H be a Hilbert space and M a von Neumann algebra on H with a unit vector Ω such that

The vector Ω is called a cyclic-separating trace vector. It is called a trace vector because the last condition means that the matrix coefficient corresponding to Ω defines a tracial state on M. It is called cyclic since Ω generates H as a topological M-module. It is called separating because if aΩ = 0 for a in M, then aM'Ω= (0), and hence a = 0.

It follows that the map

Ja\Omega=a^*\Omega

for a in M defines a conjugate-linear isometry of H with square the identity J2 = I. The operator J is usually called the modular conjugation operator.

It is immediately verified that JMJ and M commute on the subspace M Ω, so that

JMJ\subseteq M^\prime.

The commutation theorem of Murray and von Neumann states that

JMJ=M^\prime

One of the easiest ways to see this[1] is to introduce K, the closure of the real subspace Msa Ω, where Msa denotes the self-adjoint elements in M. It follows that

 H=K\oplus iK,

an orthogonal direct sum for the real part of inner product. This is just the real orthogonal decomposition for the ±1 eigenspaces of J. On the other hand for a in Msa and b in M'sa, the inner product (abΩ, Ω) is real, because ab is self-adjoint. Hence K is unaltered if M is replaced by M '.

In particular Ω is a trace vector for M' and J is unaltered if M is replaced by M '. So the opposite inclusion

JM^\prime J\subseteq M

follows by reversing the roles of M and M'.

Examples

(\lambda(g) f)(x)=f(g^{-1}x),\,\,(\rho(g)f)(x)=f(xg)
for f in \ell^2(\Gamma) and the commutation theorem implies that
\lambda(\Gamma)^{\prime\prime}=\rho(\Gamma)^\prime, \,\, \rho(\Gamma)^{\prime\prime}=\lambda(\Gamma)^\prime.
The operator J is given by the formula
 Jf(g)=\overline{f(g^{-1})}.
Exactly the same results remain true if Γ is allowed to be any countable discrete group.[2] The von Neumann algebra λ(Γ)' ' is usually called the group von Neumann algebra of Γ.
A^{\prime}=A,
so that A is a maximal Abelian subalgebra of B(H), the von Neumann algebra of all bounded operators on H.
U_g f(x) = f(g^{-1}x),
for f in H and normalises the Abelian von Neumann algebra A = L(X, μ). Let
H_1=H\otimes \ell^2(\Gamma),
a tensor product of Hilbert spaces.[3] The group–measure space construction or crossed product von Neumann algebra
 M = A \rtimes \Gamma
is defined to be the von Neumann algebra on H1 generated by the algebra A\otimes I and the normalising operators U_g\otimes \lambda(g).[4]
The vector \Omega=1\otimes \delta_1 is a cyclic-separating trace vector. Moreover the modular conjugation operator J and commutant M ' can be explicitly identified.

One of the most important cases of the group–measure space construction is when Γ is the group of integers Z, i.e. the case of a single invertible measurable transformation T. Here T must preserve the probability measure μ. Semifinite traces are required to handle the case when T (or more generally Γ) only preserves an infinite equivalent measure; and the full force of the Tomita–Takesaki theory is required when there is no invariant measure in the equivalence class, even though the equivalence class of the measure is preserved by T (or Γ).[5][6]

Commutation theorem for semifinite traces

Let M be a von Neumann algebra and M+ the set of positive operators in M. By definition,[2] a semifinite trace (or sometimes just trace) on M is a functional τ from M+ into [0,∞] such that

  1.  \tau(\lambda a + \mu b) = \lambda \tau(a) + \mu \tau(b) for a, b in M+ and λ, μ ≥ 0 (semilinearity);
  2.  \tau(uau^*)=\tau(a) for a in M+ and u a unitary operator in M (unitary invariance);
  3. τ is completely additive on orthogonal families of projections in M (normality);
  4. each projection in M is as orthogonal direct sum of projections with finite trace (semifiniteness).

If in addition τ is non-zero on every non-zero projection, then τ is called a faithful trace.

If τ is a faithul trace on M, let H = L2(M, τ) be the Hilbert space completion of the inner product space

M_0=\{a\in M| \tau(a^*a) <\infty\}

with respect to the inner product

(a,b)=\tau(b^*a).

The von Neumann algebra M acts by left multiplication on H and can be identified with its image. Let

Ja=a^*

for a in M0. The operator J is again called the modular conjugation operator and extends to a conjugate-linear isometry of H satisfying J2 = I. The commutation theorem of Murray and von Neumann

JMJ=M^\prime

is again valid in this case. This result can be proved directly by a variety of methods,[2] but follows immediately from the result for finite traces, by repeated use of the following elementary fact:

If M1  \supseteq M2 are two von Neumann algebras such that pn M1 = pn M2 for a family of projections pn in the commutant of M1 increasing to I in the strong operator topology, then M1 = M2.

Hilbert algebras

The theory of Hilbert algebras was introduced by Godement (under the name "unitary algebras"), Segal and Dixmier to formalize the classical method of defining the trace for trace class operators starting from Hilbert–Schmidt operators.[7] Applications in the representation theory of groups naturally lead to examples of Hilbert algebras. Every von Neumann algebra endowed with a semifinite trace has a canonical "completed"[8] or "full" Hilbert algebra associated with it; and conversely a completed Hilbert algebra of exactly this form can be canonically associated with every Hilbert algebra. The theory of Hilbert algebras can be used to deduce the commutation theorems of Murray and von Neumann; equally well the main results on Hilbert algebras can also be deduced directly from the commutation theorems for traces. The theory of Hilbert algebras was generalised by Takesaki[6] as a tool for proving commutation theorems for semifinite weights in Tomita–Takesaki theory; they can be dispensed with when dealing with states.[1][9][10]

Definition

A Hilbert algebra[2][11][12] is an algebra \mathfrak{A} with involution xx* and an inner product (,) such that

  1. (a,b)=(b*,a*) for a, b in \mathfrak{A};
  2. left multiplication by a fixed a in \mathfrak{A} is a bounded operator;
  3. * is the adjoint, in other words (xy,z) = (y, x*z);
  4. the linear span of all products xy is dense in \mathfrak{A}.

Examples

Properties

Let H be the Hilbert space completion of \mathfrak{A} with respect to the inner product and let J denote the extension of the involution to a conjugate-linear involution of H. Define a representation λ and an anti-representation ρ of \mathfrak{A} on itself by left and right multiplication:

 \lambda(a)x=ax,\, \, \rho(a)x=xa.

These actions extend continuously to actions on H. In this case the commutation theorem for Hilbert algebras states that

\lambda(\mathfrak{A})^{\prime\prime}=\rho(\mathfrak{A})^\prime

Moreover if

M=\lambda(\mathfrak{A})^{\prime\prime},

the von Neumann algebra generated by the operators λ(a), then

JMJ=M^\prime

These results were proved independently by Godement (1954) and Segal (1953).

The proof relies on the notion of "bounded elements" in the Hilbert space completion H.

An element of x in H is said to be bounded (relative to \mathfrak{A}) if the map axa of \mathfrak{A} into H extends to a bounded operator on H, denoted by λ(x). In this case it is straightforward to prove that:[13]

The commutation theorem follows immediately from the last assertion. In particular

The space of all bounded elements \mathfrak{B} forms a Hilbert algebra containing \mathfrak{A} as a dense *-subalgebra. It is said to be completed or full because any element in H bounded relative to \mathfrak{B}must actually already lie in \mathfrak{B}. The functional τ on M+ defined by

 \tau(x) = (a,a)

if x =λ(a)*λ(a) and ∞ otherwise, yields a faithful semifinite trace on M with

 M_0=\mathfrak{B}.

Thus:

There is a one-one correspondence between von Neumann algebras on H with faithful semifinite trace and full Hilbert algebras with Hilbert space completion H.

See also

Notes

  1. 1 2 Rieffel & van Daele 1977
  2. 1 2 3 4 Dixmier 1957
  3. H1 can be identified with the space of square integrable functions on X x Γ with respect to the product measure.
  4. It should not be confused with the von Neumann algebra on H generated by A and the operators Ug.
  5. Connes 1979
  6. 1 2 Takesaki 2002
  7. Simon 1979
  8. Dixmier uses the adjectives achevée or maximale.
  9. Pedersen 1979
  10. Bratteli & Robinson 1987
  11. Dixmier 1977, Appendix A54–A61.
  12. Dieudonné 1976
  13. Godement 1954, pp. 52–53

References

This article is issued from Wikipedia - version of the Saturday, February 20, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.