SS Conte di Savoia

SS Conte di Savoia lying at anchor at Genoa
History
Name: SS Conte di Savoia
Owner: Italian Line
Port of registry: Italy
Builder: Cantieri Riuniti dell'Adriatico of Trieste, Italy
Launched: 18 October 1931
Christened: Marie José of Belgium
Maiden voyage: 30 November 1932
Fate: Scuttled by retreating German military in September 1943 and scrapped in 1945.
General characteristics
Type: Ocean liner
Tonnage: 48,502 gross tons
Length: 248.25 m (814.5 feet)
Beam: 29.28 m (96 feet)
Height: 35 m (114.8 feet)
Draught: 9.5 m (31.2 feet)
Installed power: Steam turbines
Propulsion: Quadruple propellers
Speed: 27 knots (50 km/h)
Capacity:
  • 2,200 total:
  • 500 first class
  • 366 second class
  • 412 tourist class
  • 922 third class
Crew: 786 total

SS Conte di Savoia ("Count of Savoy") was an Italian ocean liner built in 1932 at the Cantieri Riuniti dell'Adriatico, Trieste.

Conte di Savoia was originally ordered for the Lloyd Sabaudo line, however, after a merger with the Navigazione Generale Italiana, the ship was completed for the newly formed Italia Flotte Riunite. The new Italia Line also controlled Rex, a similar though slightly larger ship completed just two months before Conte di Savoia. The Conte di Savoia was more modern in decoration and appearance than Rex, and was considered to be an exceptionally beautiful ship. She was the first liner fitted with gyroscopic stabilizers.

History

In November 1932 she made her maiden voyage to New York. The voyage almost became a disaster when an outlet valve jammed and blew a large hole below the waterline. The ship completed her maiden voyage thanks to crew member Gennaro Amatruda who plugged a leak in a broken valve-port saving the ship from possible disaster. Conte di Savoia never held the Blue Riband for fastest speed during an Atlantic crossing, although on one attempt she did average just 0.2 knots (0.4 km/h) slower than the Blue Riband holder Rex.

Conte di Savoia had one unusual feature designed to increase passenger numbers. Three huge anti-rolling gyroscopes were fitted low down in a forward hold. These rotated at high revolutions and were designed to eliminate rolling - a persistent problem on the rough North Atlantic crossing that affected all shipping lines.[1] In practice they reduced the rolling by slowing down the rolling period, however, they also caused the vessel to "hang" annoyingly when the vessel was on the extreme limit of her rolls. For safety reasons the system was quickly abandoned on eastbound crossings where the prevailing weather produced following seas, although it was still used on westbound crossings. This was because with a following sea (and the deep slow rolls this generated) the vessel tended to 'hang' with the system turned on, and the inertia it generated made it harder for the vessel to right herself from heavy rolls.[1] None of this ever affected the operation of the shipping lines advertising department and the benefits of a "smooth crossing" were heavily promoted during the life of the ship.

During troop service in World War II, Conte di Savoia was set on fire and sunk by retreating German forces on 11 September 1943. She was re-floated in 1945, but eventually scrapped.

See also

References

  1. 1 2 "Italian Liner To Defy The Waves" Popular Mechanics, April 1931

External links

This article is issued from Wikipedia - version of the Sunday, January 17, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.