Control banding

Control banding is a qualitative or semi-quantitative risk assessment and management approach to promoting occupational health and safety. It is intended to minimize worker exposures to hazardous chemicals and other risk factors in the workplace and to help small businesses by providing an easy-to-understand, practical approach to controlling hazardous exposures at work.

The principle of control banding was first applied to dangerous chemicals, chemical mixtures, and fumes. The control banding process emphasizes the controls needed to prevent hazardous substances from causing harm to people at work. The greater the potential for harm, the greater the degree of control needed to manage the situation and make the risk “acceptable.” [1]

A single control technology or strategy is matched with a single band, or range of exposures (e.g. 1-10 milligrams per cubic meter) for a particular class of chemicals (e.g. skin irritants, reproductive hazards).

Here is an example of four control bands developed for inhalation hazards.

Band no. Hazard Group Exposure Concentration Control Strategy
1 Skin and eye irritants <1–10 mg/m3 dust, or >50 to 500 ppm vapor General ventilation and good industrial hygiene practices.
2 Harmful on single exposure >0.1 to 1 mg/m3 dust or >5 to 550 ppm vapor Local exhaust ventilation
3 Severely irritating and corrosive >0.01 to 0.1 mg/m3 dust or <0.5 to 5 ppm vapor Process enclosure, an engineering control
4 Very toxic on single exposure, reproductive hazard, sensitizer <0.01 mg/m3 dust or <0.5 ppm vapor Seek expert advice

In the United Kingdom, the Health and Safety Executive (HSE) has developed a comprehensive control banding model called COSHH Essentials (COSHH stands for control of substances hazardous to health.)

The use of control banding strategies has become very popular in the pharmaceutical industry[2] where early stage development compounds may have little or no toxicology data.

Limitations of Control Banding

Control banding is not without limitations and still requires professional knowledge and experience to verify that the control measures specified have been properly installed, maintained, and used. Controls should be validated prior to use by either using substance specific industrial hygiene methods or performing surrogate monitoring.

See also

References

  1. ↑ "NIOSH Control Banding". United States National Institute for Occupational Safety and Health. Retrieved 2007-10-15.
  2. ↑ Naumann, B. "Control Banding in the Pharmaceutical Industry" (PDF). Retrieved October 16, 2009.

External links

This article is issued from Wikipedia - version of the Sunday, March 17, 2013. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.