Crocodile clip

A crocodile clip manufactured by Mueller Electric. This device is a variation of Mueller's original crocodile clip design, which was invented by Ralph Mueller in the early 1900s.
Standard clip
Crocodile clips, also called automotive clips, on a set of jumper cables
Three alligator clips: a bare standard-sized clip; a miniature clip in a yellow plastic boot; a large red Square D multi-function clip.
Pair of standard clips

A crocodile clip (also alligator clip or spring clip) is a simple mechanical device for creating a temporary electrical connection, and is named for its resemblance to an alligator's or crocodile's jaws. Functioning much like a spring-loaded clothespin, the clip's tapered, serrated jaws are forced together by a spring to grip an object. When manufactured for electronics testing and evaluation, one jaw of the clip is typically permanently crimped or soldered to a wire, or is bent to form the inner tubular contact of a ~4 mm female banana jack, enabling quick non-permanent connection between a circuit under test and laboratory equipment or to another electrical circuit. The clip is typically covered by a plastic shroud or "boot" to prevent accidental short-circuits.

Small versions, ranging in size from 15–40 mm in length, are used in electrical laboratory work.

Large versions of these clips, called automotive clips or battery clamps, are made of solid copper for low electrical resistance, and are used with thick insulated copper cables to make connections between automobile batteries. These jumper cables are capable of delivering hundreds of Amperes of current needed to directly power an automobile starter motor, or to transfer energy from a charged lead-acid battery to a discharged one.

Specifications

The United States Defense Logistics Agency specifies several types of electrical clips in Commercial Item Description (CID) A-A-59466. In this CID document, crocodile clips are designated type CC, alligator clips are designated types TCx, and other types of electrical clips have various other, unique designations.[1]

Other uses

Kelvin clip

A Kelvin clip is a special form of crocodile clip. The jaws of a Kelvin clip are insulated from each other, allowing 2 isolated wires to connect to a single test point. This enables 4-wire measurement of circuits with very low resistances.

References

  1. United States General Services Administration (2011-09-22). "CLIPS, ELECTRICAL, GENERAL SPECIFICATION FOR" (PDF). Retrieved 2015-08-02.
Wikimedia Commons has media related to Alligator clips.
This article is issued from Wikipedia - version of the Thursday, April 14, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.