Curtiss Model S
Model S | |
---|---|
Role | fighter |
National origin | United States |
Manufacturer | Curtiss Aeroplane and Motor Company |
|
The Curtiss Model S (also known as Speed Scout or Model 10) was a single-seat fighter aircraft.[1]
Development and design
The Model S was Curtiss' first attempt at a fast and maneuverable single-seat fighter. The first variant, S-1, had disappointing performance. In March 1917, new wings were attached to the S-1 fuselage and the project was redesignated S-2. In 1917, the S-3 became the first triplane in service in the United States. In 1918 and 1919, Curtiss experimented with seaplane versions of the S-3, designated S-4 and S-5. The S-6 was intended to be an improved S-3, but performance was poor and of the 12 ordered by the USASC, only 1 was delivered.[1]
Variants
- S-1 Speed Scout
- Biplane, unarmed
- S-2 Wireless
- Biplane, updated S-1 lacked wing wires. First flight in March 1917.
- S-3
- Model 10 - Triplane derived from S-2. Four built.[2]
- S-4
- Model 10A - Seaplane version of S-3 with 2 main floats
- S-5
- Model 10B - Seaplane version of S-3 with 1 main central float and two wingtip floats.
- S-6
- Model 10C - Triplane, improved S-3
Specifications (S-3)
Data from [1]
General characteristics
- Crew: 1
- Length: 19 ft 6 in (5.94 m)
- Wingspan: 25 ft 0 in (7.62 m)
- Height: 8 ft 7 in (2.62 m)
- Wing area: 142.6 ft2 (13.25 m2)
- Empty weight: 970 lb (440 kg)
- Gross weight: 1,320 lb (599 kg)
- Powerplant: 1 × Curtiss OXX-3, 100 hp (75 kW)
Performance
- Maximum speed: 115 mph (185 km/h)
- Service ceiling: 16,500 ft (5,029 m)
References
Wikimedia Commons has media related to Curtiss aircraft. |
- Bibliography
- Angelucci, Enzo (1987). The American Fighter from 1917 to the present. New York: Orion Books.
- Bowers, Peter M. (1979). Curtiss Aircraft 1907–1947. London: Putnam. ISBN 0-370-10029-8.
|
This article is issued from Wikipedia - version of the Monday, March 07, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.