DG Flugzeugbau LS10

LS10
Role 18-metre class sailplane
National origin Germany
Manufacturer DG Flugzeugbau
First flight 6 June 2003
Status In production
Number built 19


The Rolladen-Schneider LS10 is a 18 metre sailplane designed by the Rolladen-Schneider firm that was first flown as a prototype in 2003. The type underwent further development by DG Flugzeugbau before production started.

Design and development

By the mid-nineties Rolladen-Schneider, prompted by customers, began designing a successor to the LS6. Development was protracted, as the LS8 and LS9 projects had higher priority and the company's owner, Walter Schneider, felt the LS6 was still competitive.

The initial design was made under the direction of Wolf Lemke. Werner Scholz then developed the prototype, the LS10-a. Although early 3-view drawings of the LS10 showed a curved canopy rail similar to that of the ASW24, when the prototype was revealed it had the same straight canopy rail as the LS6 and LS8.

The first flight took place at Egelsbach on 6 June 2003. This was followed by extensive flight-testing and then evaluation in competitions. The prototype won the Hockenheim and Bayreuth contests in 2004 and the German Nationals in Lüsse in 2005. It took second place in the 2005 European Championships in Nitra, Slovakia. The flying qualities were reported in the German aviation magazine, Aerokurier, to be excellent.

In July 2007, Rick Walters placed first in an LS10 at the International Lilienthal Glide 2007 which is the combined Pre-World for the 30th World Gliding Championships and the 2007 German nationals in the 15M and Open Class, in Lüsse Berlin.

There are two models in production. The ‘turbo’ version is the LS10-st. It uses the same engine installation as the LS8-st. LS10-s has an engine compartment for retrofitting the engine.

It achieved certification in January 2010.

Design of the wing

The LS10 differs from the LS6 mainly in its wing; its other features are similar. The aerofoil was derived from the FX 81-K-130 profile used in the LS6, having as improvements: higher performance at the low and high ends of the speed range, and very low sensitivity to turbulence, rain and bugs. The wings have turbulator tape on the underside to prevent laminar separation bubbles. This suggests the profile lacks the clean natural transition of the Wortmann profile of 1981 and is probably more extensively laminar.

The initial design had an elliptical leading edge similar to the SZD-55-1. However the prototype adopted a triple-tapered shape that is easier to build and - most importantly - to repair. The production version will have a thicker profile at the wing root, especially modified for the turbulent flow in the vicinity of the fuselage (as with other recent gliders including the LAK-17a, ASW 28, DG-1000, Discus-2 and the eta).

The wing is built in four parts. It has interchangeable wing tips, giving 15 or 18 metre span. The partition line for the wing extensions was located considerably inboard in the prototype, a feature that first appeared in the Schempp-Hirth Ventus 2c and which allows optimal planform for both spans and easier rigging. For series production DG-Flugzeugbau gave greater priority to structural and manufacturing considerations and the partition was moved outboard to seven metres from the fuselage axis.

Other design features


Specifications (with 18m wings)

General characteristics

Performance


References

This article is issued from Wikipedia - version of the Friday, March 18, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.