Dan River Steam Station

Dan River Steam Station

View of the Dan River Steam Station from NC Highway 14 in Eden, NC.
Country United States of America
Location Eden, North Carolina
Status Peak
Commission date 1949
Owner(s) Duke Energy
Thermal power station
Primary fuel Coal,
natural gas
Type Steam,
gas turbine
Combined cycle? Planned
Cooling source Dan River
Power generation
Nameplate capacity 276 MW,
620 MW planned

The Dan River Steam Station is a 276-MW coal-fired electrical power plant, owned by Duke Energy. There are also three natural gas-fueled combustion turbines at the location that provide an additional 85 MW (and which began operation in 1968[1]), and two natural gas-fueled combined cycle turbines are planned for the near future.[2]

History

The Dan River Steam Station began construction in 1948, and was finished the following year. Coal units 1 and 2 cost a combined $15 million and were, at the time, cutting-edge. The third unit was added six years later,[3] and two natural gas-fueled combined cycle turbines are planned for the near future.[4]

Addition of combined cycle turbines

In 2007, Duke Energy began to pursue permission to add two new combined cycle, natural gas-fired, 620 MW generating units to its fleet: one at the Dan River Steam Station, the other at the Buck Steam Station in Rowan County. This was done in order to diversify the company's fuel sources, expand its generating capacity, and to modernize its energy generation by moving away from less efficient, more polluting coal. After the two turbines were added, the three older coal units went offline in 2012.[5]

References

Coordinates: 36°29′13″N 79°43′05″W / 36.487°N 79.718°W / 36.487; -79.718

This article is issued from Wikipedia - version of the Friday, November 27, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.