de Lackner HZ-1 Aerocycle

For the World War One bomber, see Airco DH.4.
HZ-1 Aerocycle
An infantryman in khaki uniform and steel helmet, a rifle slung on his back, stands atop a platform mounted above two counter-rotating rotors and four landing-gear legs of a strange helicopter-like craft, holding the steering handlebars of the vehicle.
Role Experimental rotorcraft
National origin United States
Manufacturer de Lackner Helicopters
Designer Lewis C. McCarty Jr.
First flight 22 November 1954
Primary user United States Army
Number built 12


The HZ-1 Aerocycle, also known as the YHO-2 and by the manufacturer's designation DH-4 Heli-Vector, was an American one-man "personal helicopter" developed by de Lackner Helicopters in the mid-1950s. Intended to be operated by inexperienced pilots with a minimum of 20 minutes of instruction,[1] the HZ-1 was expected to become a standard reconnaissance machine with the United States Army. Although early testing showed that the craft had promise for providing mobility on the atomic battlefield, more extensive evaluation proved that the aircraft was in fact too difficult to control for operation by untrained infantrymen, and after a pair of crashes the project was abandoned. A single model of the craft was put on display.

Design and development

During the early 1950s, Charles H. Zimmerman of the National Advisory Committee for Aeronautics (NACA) developed a system for control of a rotorcraft in which, with the rotors mounted on the underside of the aircraft, the machine could be steered by the pilot through the simple shifting of his weight,[2] and kept stable through the actions of his natural reflexes.[3] Known as kinesthetic control, and similar in principle to the mechanics of riding a bicycle or a surfboard,[3] it was hoped that the concept would allow for pilots to operate an aircraft with little to no training time.[4] NACA testing proved that the idea had merit, and several companies, including Bensen Aircraft, Hiller Aircraft, and de Lackner Helicopters, began development of rotorcraft using the concept.[2]

The concept proposed by de Lackner Helicopters was a one-man flying platform, and it received the company designation "DH-4". The DH-4 was expected to be able to carry up to 120 pounds (54 kg) of cargo[4] or an auxiliary 5-US-gallon (19 l; 4.2 imp gal) fuel tank to extend its range up to 50 miles (80 km)[5] in addition to its pilot; in addition, a cargo lifting line could be threaded through the rotor shaft for the carrying of slung loads underneath the craft.[5]

The machine was a simple, cross-shaped frame, with the pilot standing on a platform, secured by a safety harness. The harness also secured the aircraft's engine, which was an outboard motor manufactured by Mercury Marine.[5] The engine was controlled by a twist-grip motorcycle-style throttle[6] and transferred power to the 15-foot (4.6 m) diameter, contra-rotating rotors via belt drive[2] with a chain reduction unit.[7] The aircraft's landing gear consisted of airbags at the end of each arm of the frame along with a large rubber float in the middle, allowing for amphibious capability,[5] although this arrangement was later replaced by a pair of conventional helicopter-type skids.[8]

Testing

An Army officer in khakis and cap stands aboard a strange flying machine with twin rotors beneath his feet, running up on the ground, performing pre-flight checks.
Captain Sundby test-flies the HZ-1

Originally designated YHO-2 by the U.S. Army, then later re-designated HZ-1 and named "Aerocycle", the prototype made its first tethered flight on 22 November 1954,[9] with its first free flight taking place in January 1955 at the Brooklyn Army Terminal.[2] Over 160 flights totaling more than 15 hours of flight time were conducted,[9] and the results of this early test flight program were considered promising enough that a dozen examples of the type were ordered[2] (serial numbers 56-6928 to 56-6939).[10] Predictions were made that the craft could provide transport to a modern version of the old horse cavalry, providing airborne "eyes and ears" for the Army.[11]

In 1956, the test program was transferred to Fort Eustis, Virginia, where Captain Selmer Sundby took over test-flying duties.[2] The HZ-1 had been designed to be very easy to fly, and early testing indicated that untrained soldiers could learn to operate the craft in less than 20 minutes,[6] and some claiming that only five minutes of instruction were required.[12] In addition, the HZ-1 proved to be faster than other flying platform designs evaluated by the Army.[2] Sundby, however, quickly determined that the craft was much more difficult to fly than had been expected,[2] and would not be safe in the hands of an inexperienced pilot.[2] In addition, the low-mounted rotors proved to be prone to kicking up small rocks and other debris.[4]

Over a series of tethered and free-flying test flights lasting up to 43 minutes, the HZ-1 suffered a pair of accidents. Both crashes occurred under similar conditions – the contra-rotating rotors intermeshed and collided, the blades shattering, causing an immediate loss of control resulting in a crash.[2] Aerodynamic testing was conducted in the full-scale wind tunnel at the Langley Research Center, and it was discovered that the Aerocycle's forwards speed was limited by an uncontrollable pitching motion, but rotor-tip clearance was always sufficient.[13] The inability to determine the precise cause of the intermeshing, combined with the fact that the "personal lifting device" concept was failing to live up to its expectations, led to the decision to terminate the project.[2]

Sundby was awarded the Distinguished Flying Cross for his test-flying work with the HZ-1,[2] going on to test-fly the H-21 and H-34 helicopters, as well as seeing combat in the Vietnam War before retiring with the rank of colonel.[14]

Parachute development

The shattered remains of a small helicopter-like craft lay on their side on the ground following an accident.
A HZ-1 following a crash

An entirely new type of parachute with extremely fast opening characteristics, the "Ultra-Fast Opening Personnel Parachute Type XMP-2", was developed for use in testing of the HZ-1 and Hiller VZ-1 flying platforms. Designed for use from 0 to 50 miles per hour (0–80 km/h) and at altitudes as low as 25 feet (7.6 m), the XMP-2 proved to have insufficient reliability for use as a personnel parachute.[15]

Aircraft on display

Of the dozen examples of the type ordered by the U.S. Army, only a single example of the HZ-1 has survived, and this aircraft is currently on display in the U.S. Army Transportation Museum at Fort Eustis, Newport News, Virginia.[2]

Specifications

Data from [5][8]

General characteristics

Performance

See also

Aircraft of comparable role, configuration and era
Related lists

References

Notes
  1. "Aerocycle Lifts Soldier" Popular Mechanics, April 1956, p. 88
  2. 1 2 3 4 5 6 7 8 9 10 11 12 13 U.S. Army Transportation Museum
  3. 1 2 Hiller Aviation Museum
  4. 1 2 3 Goebel 2011
  5. 1 2 3 4 5 Mechanix Illustrated 1955
  6. 1 2 Flight and Aircraft Engineer, 2 November 1956, p. 724.
  7. Champlin 1953
  8. 1 2 Harding 1997, p. 112.
  9. 1 2 The Aeroplane, v. 88, 1955. p. 443.
  10. Heyman and Parsch 2004
  11. Corn and Horrigan 1996, p. 127.
  12. The AOPA Pilot, v. 15, 1955.
  13. Coleman 1997, p. 4.
  14. "Selmer A. Sundby". U.S. Army Aviation Museum website. Accessed 27 May 2010.
  15. "Ultra-fast Opening Personnel Parachute Type XMP-2". Defense Technical Information Center. Accessed 27 May 2010.
Bibliography

External links

Wikimedia Commons has media related to HZ-1 Aerocycle.

This article is issued from Wikipedia - version of the Tuesday, June 23, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.