Die shrink

The term die shrink (sometimes optical shrink or process shrink) refers to a simple semiconductor scaling of semiconductor devices, mainly transistors. The act of shrinking a die is to create a somewhat identical circuitry using a more advanced fabrication process, usually involving an advance of lithographic node. This reduces overall costs of a chip company, as the absence of major architectural changes to the processor lowers research and development costs, while at the same time allowing more processor dies to be manufactured on the same piece of silicon wafer, resulting in less cost per product sold.

Details

Die shrinks are the key to improving price/performance at semiconductor companies such as Intel, AMD (including the former ATI), NVIDIA, and Samsung. Examples in the 2000s include the codenamed Cedar Mill Pentium 4 processors (from 90 nm CMOS to 65 nm CMOS) and Penryn Core 2 processors (from 65 nm CMOS to 45 nm CMOS), the codenamed Brisbane Athlon 64 X2 processors (from 90 nm SOI to 65 nm SOI), and various generations of GPUs from both ATI and NVIDIA. In January 2010, Intel released Clarkdale Core i5 and Core i7 processors fabricated with a 32 nm process, down from a previous 45 nm process used in older iterations of the Nehalem processor microarchitecture.

Die shrinks are beneficial to end-users as shrinking a die reduces the current used by each transistor switching on or off in semiconductor devices while maintaining the same clock frequency of a chip, making a product with less power consumption (and thus less heat production), increased clock rate headroom, and lower prices. Since the cost to fabricate a 200-mm or 300-mm silicon wafer is proportional to the number of fabrication steps, and not proportional to the number of chips on the wafer, die shrinks cram more chips onto each wafer, resulting in lowered manufacturing costs per chip.

Half-shrink

In CPU fabrications, a die shrink always involves an advance to a lithographic node as defined by ITRS (see list at right). For GPU and SoC manufacturing, the die shrink often involves shrinking the die on a node not defined by the ITRS, for instance the 150 nm, 110 nm, 80 nm, 55 nm, 40 nm and more currently 28 nm nodes (an expected subsequent half-node is 20 nm), sometimes referred to as "half-node". This is a stopgap between two ITRS-defined lithographic nodes (thus called a "half-node shrink") before further shrink to the lower ITRS-defined nodes occurs, which helps save further R&D cost. The choice to perform die shrinks to either full-nodes or half-nodes rests with the foundry and not the integrated circuit designer.

Half-shrink
Main ITRS node Stopgap half-node
250 nm 220 nm
180 nm 150 nm
130 nm 110 nm
90 nm 80 nm
65 nm 55 nm
45 nm 40 nm
32 nm 28 nm
22 nm 20 nm
16 nm 14 nm
10 nm 8 nm
7 nm 6 nm
5 nm 4 nm

See also

External links

This article is issued from Wikipedia - version of the Tuesday, November 17, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.