Digital Interface for Video and Audio
DiiVA| Type |
Digital audio/video connector |
|---|
| Audio signal |
Yes |
|---|
| Data |
|---|
| Bitrate |
13.5 Gbit/s |
|---|
The Digital Interface for Video and Audio (DIVA or DiiVA) was a proposal for a bi-directional audio/video interface for transmitting both compressed and uncompressed digital streams.
It was developed by Synerchip Company, Limited, based in Guangzhou and Sunnyvale, California.[1]
DIVA supports a downstream data rate (from source to display) of 13.5 Gbit/s which is capable of deep color at resolutions higher than 1080p.[2]
DIVA also supports a 2.25 Gbit/s bi-directional communication data channel that can carry multiple sub-channels (audio, control, compressed video, etc.).[2] This gives DIVA a raw bi-directional data rate of 18 Gbit/s or a usable bi-directional data rate of 14.4 Gbit/s (because of 8b/10b encoding).[3] DIVA was demonstrated at the China Digital Living Forum & Showcase 2008 using a single CAT6A cable.[4] The DIVA Promoters Group was formed by Changhong, Haier, Hisense, Konka, Panda, Skyworth, SVA, TCL Corporation and Synerchip.[5]
In February 2008, the DIVA Promoters Group hoped to finish the specs for DIVA by the end of 2008 and have DIVA chips released in 2009 or 2010.[3]
See also
References
|
|---|
| | Analog audio | |
|---|
| | Digital audio | |
|---|
| | Video | |
|---|
| | Audio and Video | |
|---|
| | Visual charts | |
|---|
| | Other | USB |
|---|
|